• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.215-226
• /
• 2000

Computational procedure within the framework of return mapping technique has been presented to integrate the constitutive behavior of a concrete model. Developed by Ohtani and Chen, this concrete model is based on multiple hardening concept, and is rate-independent and associative. Consistent tangent operator suitable for finite element analysis is derived to preserve the rate of convergence. Accuracy of the integration technique is verified and compared with available experimental data. Computational efficiency is demonstrated by comparing with results based on elasto-plastic tangent.

• 한국분말재료학회지
• /
• 제29권4호
• /
• pp.303-308
• /
• 2022

The plastic deformation behavior of additively manufactured anisotropic structures are analyzed using the finite element method (FEM). Hill's quadratic anisotropic yield function is used, and a modified return-mapping method based on dual potential is presented. The plane stress biaxial loading condition is considered to investigate the number of iterations required for the convergence of the Newton-Raphson method during plastic deformation analysis. In this study, incompressible plastic deformation is considered, and the associated flow rule is assumed. The modified return-mapping method is implemented using the ABAQUS UMAT subroutine and effective in reducing the number of iterations in the Newton-Raphson method. The anisotropic tensile behavior is computed using the 3-dimensional FEM for two tensile specimens manufactured along orthogonal additive directions.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.185-192
• /
• 1995

A numerical algorithm for plane stress and shell elasto-plasticity is presented in this paper. The proposed strain decomposition (SD) algorithm is an elastic predictor/plastic corrector algorithm, and in the context of operator splitting, is a return mapping algorithm. However, it differs significantly from other return mapping algorithms in that only the necessary response functions are used without invoking their gradients, and the stress increment is updated only at the end of the time step. This makes the proposed SD algorithm more suitable for materials with complex yield surfaces and will guard against error accumulation during the time step. Comparative analyses of structural systems using the proposed strain decomposition (SD) algorithm and the iterative radial return (IRR) algorithm are presented. The results demonstrate the accuracy and usefulness of the proposed algorithm.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.197-208
• /
• 2000

최 등/sup 1)/은 total lagrangian formulation에 근거한 증분 평형방정식을 적용하고, 강도행렬 산정시 회전각의 2차항을 포함시켜 기하학적 비선형 해석시 해의 수렴성을 향상시켰다. 또한 등매개 쉘 유한요소의 단점인 전단구속 현상과 제로 에너지 모드가 발생하는 문제를 극복하기 위하여 가정 변형률장을 적용하여 보강된 판 및 쉘 구조의 비선형 해석법을 개발하였다. 본 연구에서는 잔류응력을 고려한 쉘구조의 극한강도 해석을 수행하기 위하여, 대변형거동과 함께 소성붕괴거동을 추적할 수 있는 알고리즘을 제시한다. 잔류응력을 고려한 증분평형방정식에 return mapping algorithm을 이용한 탄소성 해석법을 결합시켜서 보강된 판 및 쉘구조의 극한거동을 파악한다. 수치해석 예제를 통하여 본 연구에서 제시된 유한요소 및 비선형 해석 알고리즘에 대한 효율성 및 적용성을 확인하였다.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1562-1570
• /
• 2003

The prediction of the inelastic behavior of the structure is an essential part of reliability assessment procedure, because most of the failures are induced by the inelastic deformation, such as creep and plastic deformation. During decades, there has been much progress in understanding of the inelastic behavior of the materials and a lot of inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. The radial return mapping is one of the most robust integration scheme currently used. Nonlinear kinematic hardening model of Armstrong-Fredrick type has recovery term and the direction of kinematic hardening increment is not parallel to that of plastic strain increment. In this case, The conventional radial return mapping method cannot be applied directly. In this investigation, we expanded the radial return mapping method to consider the nonlinear kinematic hardening model and implemented this integration scheme into ABAQUS by means of UMAT subroutine. The solution of the non-linear system of algebraic equations arising from time discretization with the generalized midpoint rule is determined using Newton method and bisection method. Using dynamic yield condition derived from linearization of flow rule, the integration scheme for elastoplastic and viscoplastic constitutive model was unified. Several numerical examples are considered to demonstrate the efficiency and applicability of the present method.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 춘계학술대회 논문집
• /
• pp.6-9
• /
• 2001

집중도를 평가하기 위하여 피험자에게 집중을 유발시키는 3가지 task(단기기억작업, Corsi block tapping task, visuomotor task)를 부가하고 주관평가 및 생리신호(뇌파, 심전도, 맥파, 피부온도, 호흡, 피부전도도)를 측정하였다. 뇌파를 mapping하여 평가에 적합한 전극이 위치를 선정하고, task 수행중 집중도 변화와 짐전도의 심박변화와의 관계를 분석하였다. 분석결과 안정과 task 수행시 뇌파 mapping상 전체 power의 변호가 frontal 부분에서 크게 나타났으며, 집중시 R-R 간격의 순간간격변화가 줄어들었다.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1455-1464
• /
• 1994

A new and efficient algorithm for the integration of the thermal-elasto-plastic constitutive equation is proposed. While it falls into the category of the return mapping method, the algorithm adopts the three point approximation of plastic corrector within one time increment step. The results of its application to a von Mises-type thermal-elasto-plastic model with combined hardening and temperature-dependent material properties show that the accurate iso-error maps are obtained for both angular and radial errors. The accuracy achieved is because the predicted stress increment in a single step calculation follows the exact value closely not only at the end of the step but also through the whole path. Also, the comparison of the computational time for the new and other algorithms shows that the new one is very efficient.

• 한국지진공학회논문집
• /
• 제5권3호
• /
• pp.57-64
• /
• 2001

보강된 판 및 쉘구조의 동적 비선형해석을 수행하기 위하여, 유한회전을 고려한 변형된 쉘유한요소를 이용하여 total Lagrangian formulation이 제시된다. 전단구속 (shear locking) 현상과 가상의 제로에너지 모우드를 동시에 제거하기 위하여 가정변형도 개념을 채용한다. 탄소성해석에서는 return mapping 미해rithm이 쉘구조의 붕괴 해석에 적용된다. Newmark 직접적분법을 사용하여 동하중 및 지진하중을 받는 쉘구조의 동적 비선형해석 결과를 제시한다.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.101-108
• /
• 2020

The present study intends to analyze damage in thin-walled steel cylinders undergoing constant internal pressure and thermal cycles through use of anisotropic continuum damage mechanics (CDM) model coupled with nonlinear kinematic hardening rule of Chaboche. Materials damage in each direction was defined based on plastic strain and its direction. Stress and strain distribution over wall-thickness was described based on the CDM model and the return mapping algorithm was employed based on the consistency condition. Plastic zone expansion across the wall thickness of cylinders was noticeably affected with change in internal pressure and temperature gradients. Expansion of plastic zone over wall-thickness at inner and outer surfaces and their boundaries demarking elastic and plastic regions was attributed to the magnitude of damage induced over thermomechanical cycles on the thin-walled samples tested at various pressure stresses.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.174-179
• /
• 1998

In this paper, the radar altimeter for topographic mapping over land is introduced and the characteristics of the return signals are analyzed. The radar system is described briefly and the requirements to get the fine resolution of the terrain surface height are considered. The designed radar altimeter was tested on the landscape in the near of Stuttgart. The measured data shows very fine profile of the test landscape and the height errors induced from different geometrical structure of the land surface are acquired in the measurement. In the test area, most characteristics of radar return signals over land could be tested and the results of the topographic mapping using our radar altimeter can be used for future radar altimeter development for land applications.