• 대한화학회지
• /
• 제39권11호
• /
• pp.848-855
• /
• 1995

평판형 열장흐름분획법에서 중력효과에 의한 polystyrene(PS)와 polymethylmethacrylate(PMMA)의 머무름 거동에 관하여 연구하였다. 하향 이동상 흐름의 경우 이동상 흐름 방향과 같은 방향으로 작용하는 중력 효과는 수평면 으로부터 장치각도가 0.deg.에서 60.deg.까지 변화함에 따라 증가하였다. 이 효과는 PS와 PMMA의 머무름 시간을 작게 하였고, 무차원 변수 .lambda.의 값을 증가시켰다. 그리고 분자량이 다른 두개의 고분자 머무름 시간차를 감소시켜 분리기능 저하시켰다. 상향 이동상 흐름의 경우 이동상 흐름의 반재 방향으로 작용하는 중력 효과는 수평면으로부터 장치의 각도가 0.deg.에서 60.deg.까지 증가함에 따라 증가하였다. 이 효과는 PS와 PMMA의 머무름 시간을 크게 하였고, 무차원 변수.lambda.의 값을 감소 시켰다. 그리고 분자량이 다른 두 개의 고분자 머무름 시간 차를 증가시켜 분리능을 향상시켰다.

• 전자공학회논문지A
• /
• 제30A권9호
• /
• pp.59-70
• /
• 1993

An efficient test method based on march test is presented to cover line leakage failures associated with bit and word lines or mega bit DRAM chips. A modified column march (Y-march) pattern is derived to improve fault coverage against the data retention failure. Time delay concept is introduced to develop a new column march test algorithm detecting various data retention failures. A built-in test circuit based on the column march pattern is designed and verified using logic simulation, confirming correct test operations.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1011-1019
• /
• 2000

본 연구는 유입수의 농도, 수리학적 체류시간 및 F/M비와 슬러지 첨전성과의 상관관계를 새롭게 명확히 밝혀 기존에 제시된 각 처리법 즉 장기포기법, 재래식 활성슬러지법, 고율 활성슬러지법 및 수정포기법의 설계조건이 도출된 원인을 밝히고 동시에 이들 기 제시된 설계조건에 관계없이 설계가 가능함을 확인하기 위한 연구이다. 본 실험은 특히 체류시간과 미생물의 침강성을 중심으로 고찰되었는데, 이는 슬러지의 침강성이 기존 각 처리법의 운전조건을 결정하는 주인자$^{1)}$이기 때문이다. 따라서 각각의 처리법에 대해 제시된 설계범위를 벗어날 경우 슬러지는 팽화하는 것으로 알려져 있으며, 설계의 기초를 제공한 Lesperance$^{1)}$의 실험결과에서도 침강성이 확보되지 않는 부하범위가 발생하는 것으로 나타냈다. 위와 같이 일정 조건에서 슬러지가 팽화하는 원인은 Lesperance가 이전 다년간의 실패와 시도로 밝혀진 연속운전이 가능한 것으로 밝혀진 몇몇의 운전조건을 실험조건으로 채용함에 따라 각각의 체류시간에 해당하는 최적의 부하가 적용되지 않았기 때문이다. 하지만 본 실험결과 부하를 적절히 유지할 경우, F/M비 $6.3kg-BOD/kg-MLSS{\cdot}day$ 이하, HRT 0.67hr 이하의 조건에서 슬러지의 침강성이 SVI치 120 이하로 확보될 수 있음을 확인하였다. 따라서 본 연구에서는 체류시간과 그에 해당하는 최적 부하를 제시하였으며, 체류시간이 미생물의 침강성에 결정적 영향인자임을 밝히고, 아울러 본 실험결과를 근거로 이제까지 알려진 처리법에서는 적용된 바 없는 1시간 이하의 체류시간에서 고율 활성슬러지법의 적용 부하치를 수 배 능가하는 새로운 운전법 (UHR : Ultra high rate)도 가능함을 제시하였다.

• 환경위생공학
• /
• 제8권1호
• /
• pp.107-116
• /
• 1993

This study is conducted to investigate treatability by activated sludge process for wastewater from acetaldehyde manufacturing plant. The optimum hydraulic retention time in aeration tank for removal of high strength substrate were measured. The removal efficiency were checked out by hydraulic retention time : 35hr., 40hr. and 45hr., respectively. $COD_{Cr}$, like substances were removed in all hydraulic retention time zone directed for efficiency, but non-biodegradable substances were remained. $COD_{Cr}$ biomass loading was 0.81kg $COD_{Cr}/kgMLVSS$ . day at 35hr. of retention time, 0.34 kg$COD_{Cr}$/kg MLVSS . day at 40hr., and O.l9kg$COD_Cr$/kgMLVSS . day at 45hr. And the mean $COD_{Cr}$, removal efficiency was 65.5%, 81.6% and 83.0%, respectively. And also $COD_{Cr}$, volume loading was 1.01kg$COD_{Cr}/m^3$ day, 0.87kg$COD_{Cr}/m^3$ - day, and 0.79kg$COD_{Cr}/m^3{\cdot }$day, respectively. The basic design parameter obtained is as fallows. The value of Specific substrate removal rate coefficient (k), Yield coefficient(Y) and Decay coefficient($k_d$) was $0.0013day^{-1}$, $0.505kgMLVSS/kgCOD_{Cr}$ and $0.040day^{-1}$, respectively.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.49-57
• /
• 1992

First, We classified man-made lakes in Korea as 4-type lakes, that is, there were River-run lakes, Dendritic lakes, Reservoir-lakes, River-mouth lakes, We studied on the environmental factors of 3-type lakes except River-mouth lakes, compared these lakes with natural lakes in foreign country. Environmental factors were watershed area, lake storage, mean depth, hydraulic retention time. As a results, 3-type lakes in Korea had remarkable differences one another according to above-mentioned environmental factors. First, We recognized that River-run lakes had higher nutrient loading according to having wider watershed area than natural lakes, and had lower algal growth rate according to shorter hydraulic retention time than natural lakes. Dendritic lake had higher nutrient loading than natural lakes, longer retention time than River-run lake. Reservoir-lakes had environmental factors between Dentritic lakes and River-run lakes. Therefore, If this studies had no quantitative results about various factors, We recognized that man-made lakes in korea had different environmental factors as compared with natural lakes, and had clear classification among 3-type lakes.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.829-837
• /
• 2016

The mechanism of micro-bubble generation with a pump is not clarified yet, so the design of water treatment systems with a micro-bubble generating pump is based on trial and error methods. This study tried to explain clearly quantitative relationships of experimental micro-bubble concentration ($C_{air}$) of continuous operation tests with a micro-bubble generating pump and theoretical air solubility. Operation parameters for the tests were discharge pressure ($P_g$), water ($Q_{w0}$) and air ($q_0$) flow rates, orifice diameter ($D_o$), and retention time (t). The experimental micro-bubble concentrations ($C_{air}$) at 4.8 atm of discharge pressure ($P_g$) were in the range of 21.04 to 25.29 mL/L. When the retention time (t) by changing the pipe line length ($L_p$) increased from 1.22 to 6.77s, the experimental micro-bubble concentrations ($C_{air}$) increased from 25.86 to 30.78 mL air/L water linearly. The dissolved and dispersed micro-bubble concentrations ($C_{air}$) are approximately 4 times more than the theoretical air solubility.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.179-189
• /
• 2019

This study aimed to investigate the effect of temperature and solid retention time (SRT) on membrane fouling in a membrane bioreactors (MBRs). For this purpose, a lab-scale submerged MBR system was used. This system operated at two SRTs of 15 and 5 days, three various temperatures (20, 25 and $30^{\circ}C$) and hydraulic retention time (HRT) of 8 h. The results indicated that decreased the cake layer resistance and increased particles size of foulant due to increasing temperature and SRT. Fourier transform infrared (FTIR) analysis show that the cake layer formed on the membrane surface, contained high levels of proteins and especially polysaccharides in extracellular polymeric substances (EPS) but absorbance intensity of EPS functional groups decreased with temperature and SRT. EEM analysis showed that the peak on the range of Ex/Em=220-240/350-400 in SRT of 15 and temperature of $30^{\circ}C$ indicates the presence of fulvic acid in the cake. In addition, as the temperature rise from 20 to $30^{\circ}C$, concentration of soluble microbial products (SMP) increased and COD removal reached 89%. Furthermore, the rate of membrane fouling was found to increase with decreasing temperature and SRT.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1603-1609
• /
• 2006

To estimate undegraded intake protein (UIP) fraction in feeds and fodders, on the basis of their neutral detergent insoluble N content was studied. Samples of six feeds and forages were incubated in situ for a time equivalent to their mean retention time, estimated on the basis of their digestibility plus 10 h (to account for a lag in passage of particles from the rumen). The samples were incubated for 0, 25, 50, 75 and 100% of the estimated total mean retention time. UIP value of leguminous forages, obtained from the fractional rates of degradation and passage, were highly correlated with those estimated from samples incubated for 75% of total mean retention time, while incubating the non-leguminous forages and groundnut cake for this point over estimate the UIP fraction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.