• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.334-339
• /
• 2019

A procedure based on high-performance liquid chromatography (HPLC) is described to determine ${\beta}-carotene$ in infant formulas. The method for ${\beta}-carotene$ analysis was performed on a C18 reversed-phase column using acetonitrile/methanol/dichloromethane (6:1:3, v/v/v) as a mobile phase. ${\beta}-Carotene$ was determined in HPLC with photo diode array (PDA) detector. The parameters of validation were specificity, linearity, LOD, LOQ, accuracy, precision and repeatability. The specificity was confirmed by the retention time and the linearity ($R^2$), which was over 0.999 in the range of 0.125~2 mg/L. The detection and quantification limits were 0.064 and 0.193 mg/L, respectively. The accuracy and precision of this method using an STD spiked sample were 80~119% and 1.02~2.05% respectively. The method was applied to the analysis of various infant formula and follow-up formulas products containing ${\beta}-carotene$, and all the products contained acceptable levels of ${\beta}-carotene$ for nutrition labeling.

• Journal of Korea Water Resources Association
• /
• v.52 no.9
• /
• pp.615-626
• /
• 2019

Soil moisture and runoff have very close relationship. Especially the water retention capacity and drainage characteristics of the soil are determined by various factors of the soil. In this study, a total of 40 rainfall events were identified from the entire rainfall events of Sulma basin in 2016 and 2017. For each selected events, the constant-K method was used to separate direct runoff and baseflow from total flow and calculate the runoff coefficient which shows positive exponential curve with Antecedent Soil Moisture (ASM). In addition to that, the threshold of soil moisture was determined at the point where the runoff coefficient starts increasing dramatically. The threshold of soil moisture shows great correlation with runoff and depth to water table. It was founded that not only ASM but also various factors, such as Initial Soil Moisture (ISM), storage capacity of soil and precipitation, affect the results of runoff response. Furthermore, wet condition and dry condition are separated by ASM threshold and the start and peak response are analyzed. And the results show that the response under wet condition occurred more quickly than that of dry condition. In most events occurred in dry condition, factors reached peak in order of soil moisture, depth to water table and runoff. However, in wet condition, they reached peak in order of depth to water table, runoff and soil moisture. These results will help identify the interaction among factors which affect the runoff, and it will help establish the relationship between various soil conditions and runoff.

• The Korean Journal of Archival Studies
• /
• no.45
• /
• pp.155-188
• /
• 2015

This study aims to find whether there is a difference between the resulting responsiveness and substantial responsiveness, as noticing citizen satisfaction of the result of information disclosure is not equivalent to a high rate of information disclosure. Previous studies focused on the analysis of the resulting responsiveness such as disclosure decision and processing time. However, this study would identify how much opened information is equal to requested information on the side of substantial responsiveness. This study found that accuracy dropped as opening not requested information but different information and completeness dropped as omitting some part of information or opening unseizable information on the side of substantial responsiveness. There are differences between the resulting responsiveness and substantial responsiveness. Some of the opened information is not requested information despite the disclosure decision. It takes over ten days despite the immediately disclose decision. The main reason for the decline in substantial responsiveness is the passing of document retention period and the absence of data. Therefore, the obligation for the creation and preservation of records for public agencies will have to be followed with the agencies' will to opening information. Although this study analyzes the limited cases, it is significant to enunciate there are differences between the resulting responsiveness and substantial responsiveness.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.763-769
• /
• 2018

In this research, in order to improve the heat retention of greenhouse, comparative analysis of the heat flux of the marketed multi-later insulating curtain was carried out. Experiments is conducted by fabricating a test apparatus for investigating the heat flux characteristics. The multi-later insulating curtain used for the experiment was compared using the P, N, S, U and T company, which are commercially available, and the heat flux due to temperature difference between the experimental apparatus and the outside was compared and analyzed. When the internal temperature of the experimental result is the maximum temperature $60^{\circ}C$, the heat flux of multi-later insulating curtain is T Co.($73.1W/m^2$) > S Co.($119.5W/m^2$) > U Co.($155W/m^2$) > N Co.($163.1W/m^2$) > P Co.($177.7W/m^2$). The heat flux means the quantity of heat passing through the unit time per unit area, and the higher the numerical value, the higher the quantity of heat passing through the multi-layer insulating curtain. This can be determined that high heat fluxes produce low heat resistance. Further, it has been found that the weight of the insulating curtain is largely unrelated to the heat insulating property, and the heat insulating curtain having a thickness containing a high internal air layer is excellent in the heat insulating property. In the future when manufacturing a heat insulating curtain, It is judged that it is desirable to manufacture a combination of heat insulating materials that contain a high internal air layer content and that can maintain the air layer even for long-term use while minimizing the volume.

• Korean Journal of Plant Resources
• /
• v.34 no.2
• /
• pp.177-185
• /
• 2021

The purpose of this study was to compare the chemical properties of the bokbunja distributed in Korea with the content of the bioactive substance ellagic acid. The bokbunja was Rubus coreanus group and Rubus occidentalis group were compared, domestic bokbunja and import bokbunja were compared. In bokbunja, free sugar was 30.89 ± 0.7 mg/g of Rubus coreanus and 29.05 ± 0.87 mg/g of Rubus occidentalis. and 27.28 ± 7.4 mg/g of domestic bokbunja and 21.58 ± 6.73 mg/g of import bokbunja. The free amino acids was 4.50 ± 0.08 mg/g of Rubus coreanus and 5.05 ± 0.08 mg/g of Rubus occidentalis. and 4.13 ± 1.09 mg/g of domestic bokbunja and 3.75 ± 0.31 mg/g of import bokbunja. Validation of the ellagic acid method was confirmed by comparing the retention time and spectrum of the standard and extract using HPLC. The calibration curve (R²) showed linearity of 0.9999. As a result of analyzing the ellagic acid content of each extraction solvent, DMSO and methanol mixture extracts were high, and Rubus coreanus was 2.56 mg/g and Rubus occidentalis was 3.16 mg/g, which was not significantly different (p < 0.05) In addition, the ellagic acid content of domestic bokbunja and import bokbunja was 2.83 mg/g and 2.99 mg/g, which was not significantly different (p < 0.05).

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.35 no.1
• /
• pp.28-35
• /
• 2021

To analyze the clinical efficacy of acupuncture for spastic hemiplegia after stroke, this study was accomplished by considering Randomized Controlled Trials. We searched for papers that performed acupuncture for spastic hemiplegia after stroke in the China Academic Journal of the China National Knowledge Infrastructure, from January 1, 2017 to June 30, 2020. In total, 23 reports were included in this review. There are 18 studies conducted with more than 50 subjects and less than 100 subjects. The largest number of treatment was 20 times. 28days(4weeks) was the largest number of treatment period, which accounted 10 studies. The most frequently used evaluation index was The Fugl-Meyer Assessment(FMA) and Clinical Efficacy, each used 21 times and 17 times. The most frequently used acupuncture point was LI3, which was used 13 times. The retention time was 30 minutes and 11 studies were conducted. Western medicine treatment was the most common control group in 15 studies. Most of studies showed result of the intervention group was statistically significant, compared with the control group. These results suggest that acupuncture for spastic hemiplegia after stroke was effective and it was statistically more significant than the control group. However, it is difficult to confirm a conclusion, because the quality of most of studies was low.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.326-338
• /
• 2021

Ultra-performance liquid chromatography (UPLC) was used to assess the hordein protein fraction of malting barley. C-hordeins (barley prolamins) were extracted with 70% ethanol (EtOH) and 55% isopropyl alcohol (IPA, 2-propanol), and B-hordeins were extracted with the same alcohols in 1.0% dithiothreitol (DTT). High molecular weight (HMW) prolamins (D-hordeins) were extracted with 50% IPA with 1M Tris-HCl (pH 8.0). The same protein patterns were observed in both the experimental extraction solutions (EtOH and IPA). However, the patterns of hordein, extracted with EtOH and IPA containing 1.0% DTT, differed slightly. C- and B-hordeins extracted from those solutions were analyzed. Twenty-six malting barley varieties developed in Korea were analyzed using UPLC. The varieties were divided into seven groups according to hordein patterns of retention time 16 min to 18 min, and 20 varieties showed unique patterns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.321-330
• /
• 2022

This study attempted to establish an optimal multi-compound simultaneous analysis method that can secure reliable results for 15 - preservatives, 2 - sun screens and 1 - antioxidants of cosmetics using HPLC-PDA. Since the potential of hydrogen (pH) in the mobile phase affects the acid dissociation constant (pKa) of the preservatives, and the peak retention time shift and area change were observed. The peak separation condition was established by adjusting the pH to 0.1% H₃PO₄ addition (mL) when preparing the mobile phase. As a results of method validation, the linearity correlation coefficient (R²) of above 0.999 were obtained, and accuracy 87.9 ~ 101.1%, 0.1 ~ 7.6% precision for two types of cosmetics (cream and shampoo). It was found that the limit of detection (LOD) was 0.1 ~ 0.2 mg/kg and the limit of quantitation (LOQ) was 2.0 ~ 4.0 mg/kg. In addition, it was possible to simultaneously separate p-anisic acid, a natural compound that was difficult to separate in HPLC due to the small difference from methylparaben, a synthetic preservatives. Through this study, it will be effectively used to secure quality control and safety for compound that need restrictions on use cosmetics.