• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.1-4
• /
• 2000

We have developed a high performance vertical alignment TFT-LCD, that shows a high light transmittance, and wide viewing angle characteristics with an unusually high contrast ratio. In order to optimize the electro-optical properties we have studied the effect of cell parameters, multi-domain structure and retardation film compensation. With the optimized cell parameters and process conditions, we have achieved a 24" wide UXGA TFT-LCD monitor (16:10 aspect ratio 1920X1200) showing a contrast ratio over 500:1, panel transmittance near 4.5%, response time near 27 ms, and viewing angle higher than 80 degree in all directions.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.131-139
• /
• 1992

The understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading is very important for life prediction of the air travel structures. Particularly, the retardation and arrest behavior of fatigue crack propagation by single tension overloading is essential to the understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading. Numerous studies of the retardation behavior have been performed, however investigations of the arrest behavior have not been enough yet. As for the arrest behavior, Willenborg had reported that the overload shut-off ratio $[R_{so}=(K_{OL})/K_{max})_{crack arrest}]$ had been the material constant, but recently several investigators have reported that the overload shut-off ratio depends upon the stress ratio. In this study, authors have investigated the effect of stress ratio on the threshold overload shut-off ratio to generate arrest of fatigue crack growth in high tensile aluminum alloy 7075-T735 which have used in material for air travel structures, It has been $-0.4\leqqR\leqq0.4$ till now, the region of stress ratio investigated. The threshold overload shut-off ratio has decreased as stress ratio has increased in overall region of -$-0.4\leqqR\leqq0.4$ and the linearity has been seen in this material. Moreover, the experimental equation between $R_{so}$ and R has been made; The relation has been $R_{so}=-R+2.6$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.122-126
• /
• 2002

Contaminant transport in porous media is characterized by solving an advection-dispersion equation(ADE). The ADE can cover equilibrium phenomena of interest, which include sorption, decay, and chemical reactions. Among these phenomena, sorption mechanism is described by several types of sorption isotherm. If we assume the sorption isotherm as linear, the solution of ADE can be easily procured. However, if we consider the sorption isotherm as non-linear isotherm like a Dual Reactive Domain Model (DRDM), the resulting differential equation becomes non-linear. In this case, the solution of ADE cannot be easily acquired by an analytic method. In this paper, we present the numerical analysis of ADE using a DRDM. The results reveal that even if sorption data may be fitted well using linear or non-linear isotherm, the characteristics of contaminant transport of the two cases are different from each other. To be concrete, the retardation of linear isotherm has stronger effect than that of the DRDM. As the non-linearity of sorption isotherm increases, the difference of retardation effects of the two cases becomes larger. For a pulse source, the maximum concentration of the linear model is higher than that of the DRDM, but the plume of the DRDM moves faster than that of the linear model. Behaviors of contaminant transport using the DRDM are consistent with common features of a linear model. For instance, biodegradation effect becomes larger as time goes by The faster the seepage velocity is, the faster the plume of contaminant moves. The plume of the contaminant is distributed evenly over overall domain in the event of high dispersion coefficient.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.6 no.1
• /
• pp.109-115
• /
• 1995

The main purpose of this study was to treat pica in a 2.8 year old child with severe mental retardation along with autistic tendencies. His developmental age ranged from 12 to 15 month on the DDST and he had no means of communication. He was on Tegretol 200mg for seizure control. His pica involved thumb sucking, putting toys into his mouth, and licking furniture wherever he went Besides pica, he had a rumination problem. The treatment strategies for his pica consisted of two phases : In phase 1, The child was taught toy play through a 3-step guided compliance training, while his pica and rumination behaviors were recorded to investigate whether active toy play could effect any change in the untreated pica and rumination behaviors of this child. In phase 2, a facial screening was used as a means to control his pica, while his rumination was recorded to see whether controlling his pica could bring any change in the untreated ruminating behavior. The results showed that the facial screening was very effective in decreasing his pica from an average of 18.6 times per 15 minute in the baseline to 2.3 times post-treatment. Response covariation was observed across pica and rumination while toy play compliance training alone was being conducted, and covariation across rumination was observed while pica alone was being treated with facial screening.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.40-40
• /
• 2001

Heat stress to bovine oocytes and embryos has suggested a potential role of retardation of their development. Limited study has reported on the effect of heat shock on sperm before using it for IVF. Caudal epididymal sperm cultured in 42$^{\circ}C$ incubator for 0.5, 1 and 2 h compared on sperm viability and oocyte development after its use for IVF to those of control. Oocytes were matured for 22 h and then inseminated with treated or control sperm for 16 h. Embryos were cultured in CRlaa medium, transferred to TCM199＋10% FBS on day 4, and maintained on day 9. A higher proportion (84.1%, 0.5 h; 72%, 1 h: 65%, 2 h) in treated sperm was observed dead and abnormal pattern as 100% of consider as control. In control the rates of cleavage and development into blastocyst were 76% and 22%, respectively, and did not differ the rates between 1 h and 2 h of culture. Significant differences were appeared in the rates between treated for an hour and control (32% and 5% vs. 54% and 10%, respectively). Moreover increased time of culture is more retardation to be cleaved the oocytes. However, the rates of blastocyst from cleaved embryos in treated group similar to control (25% vs. 29%, respectively). The reason for this remains unclear, but male sperm, from preliminary experiment(data un-shown) for sexing of resulting embryos, would be more fragility on heat stress.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1041-1046
• /
• 2010

The reactions between a Sn-3.0Ag-0.5Cu solder alloy and electroless Ni/electroless Pd/immersion Au (ENEPIG) surface finishes with various Pd layer thicknesses (0, 0.05, 0.1, 0.2, $0.4{\mu}m$) were examined for the effect of the Pd layer on the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow at $235^{\circ}C$. The thin layer deposition of an electroless Pd (EP) between the electroless Ni ($7{\mu}m$) and immersion Au ($0.06{\mu}m$) plating on the Cu substrate significantly retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow. Its retarding effect increased with an increasing EP layer thickness. When the EP layer was thin (${\leq}0.1{\mu}m$), the retardation of the massive spalling was attributed to a reduced growth rate of the $(Cu,Ni)_6Sn_5$ layer and thus to a lowered consumption rate of Cu in the bulk solder during reflow. However, when the EP layer was thick (${\geq}0.2{\mu}m$), the initially dissolved Pd atoms in the molten solder resettled as $(Pd,Ni)Sn_4$ precipitates near the solder/$(Cu,Ni)_6Sn_5$ interface with an increasing reflow time. Since the Pd resettlement requires a continuous Ni supply across the $(Cu,Ni)_6Sn_5$ layer from the Ni(P) substrate, it suppressed the formation of $(Ni,Cu)_3Sn_4$ at the $(Cu,Ni)_6Sn_5/Ni(P)$ interface and retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.4
• /
• pp.217-226
• /
• 2019

Background: We aimed to assess the dose needed to achieve the propofol effect-site concentration using target-controlled infusion in intellectually disabled patients and to detail the most effective method for achieving a safe level of consciousness without hemodynamic changes as well as detail any resulting adverse effects. Methods: We performed a retrospective review of sedation service records of 138 intellectually disabled patients (51, mental retardation; 36, autism; 30, brain lesion, 12 genetic diseases, 9 dementia) aged over 15 years and weighing over 30 kg. These patients had received propofol via target-controlled infusion in the special care dental clinic of Seoul National University Dental Hospital from May 2008 to September 2018 for restorative treatment (112), minor surgery (13), prosthodontics (7), periodontics treatment (5), and implant (1). Results: For all groups, the duration of dental treatments was $43{\pm}18$ minutes, total sedation time was $73{\pm}23$ minutes, and total BIS values was $57{\pm}12$. The propofol maintenance dosage values for each group were: mental retardation, $3{\pm}0.5(2-4){\mu}g/ml$; autism, $3.1{\pm}0.7(2-5){\mu}g/ml;$; brain lesion, $2.8{\pm}0.7(1.5-5){\mu}g/ml;$; genetic disease, $2.9{\pm}0.9(1-4){\mu}g/ml;$ and dementia $2.3{\pm}0.7(1-3.4){\mu}g/ml;$. Conclusions: The dementia group needed a lower dosage to reach a safe, effective propofol effect-site concentration than the other groups. Since there were no complications, deep sedation is a great alternative to general anesthesia for dental treatment of intellectually disabled patients.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.252-258
• /
• 2003

This experiment was performed to investigate the effect of UV-B (4 kJ${\cdot}m^{-2}{\cdot}d^{-1}$) irradiation and growth inhibitor (50 mg${\cdot}L^{-1}$ diniconazole, 500 mg${\cdot}L^{-1}$) treatment on the overgrowth retardation and the growth and yield afterplanting in plug-grown cucumber, tomato, and hot pepper sedlings. Stem length of UV-B-irradiated and iniconazole-treated seedlings was shortened by 38 and 35%^ in cucumber, 37 and 41% in tomato, and 23 and 23% in hot pepper, respectively, compared with non-treated seedlings. While retarding effect ofhexaconazole waslower that that of UV-B or diniconazle. Leaf area and dry weight alson decreased but ldaf thickness increased in UV-B irradiated or growth-inhibitor-treated seedlings. Even thouth the plant height and leaf area of UV-B-irradiated seedlings ant seedling stage were shorter and smaller that those ofnon-treatedd seedlings, they were recovered to the similar level to the growth of non-treated seedlings 20to 30days after trasplantin. The diconazole-and hexaconazole-treated seedlings were delayed recovery to their normal growth, Fruit yiedl of UV-V-irradiated hot pepper and tomato slightly increased but UV-B irradiated cucumer had similar yield to growth-inhibitor-treated one. It suggested that the use of UV-B irradiation could become a reliable tool of overgrowth retardation of plug-grown vegetable seedlings in greenhouse.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.202-210
• /
• 2005

In this study, the fly ash was employed as a possible alternative to the bentonite for its high sorption capacity against cationic heavy metal. To consider the constituents of barrier possibly used, the specimens were mixed with different material contents (fly ash : weathered soil : bentonite), then sorption test was performed. Also the specimens were molded on the wet side of optimum moisture contents like mixing ratio of sorption test and their hydraulic conductivities were measured in flexible-wall permeameters. And to confirm the effect of dissolved cations, the hydraulic conductivity tests were repeated by converting the permeant liquids from water to $Cd^{2+}$ solution. Finally, the Cd-concentration at the effluent was analyzed for 500hrs to compare the effectiveness of each specimen in contaminant retardation. Test results showed that the more the ratio of fly ash increase, the more Kd value increase, and the hydraulic conductivity of weathered soil/bentonite (95:5) mixture was the lowest $(2.9*10^{-8}cm/sec)$, and specimens made of fly ash and fly ash/weathered soil mixtures showed similar hydraulic conductivity. Although the permeant liquid was changed from water to $Cd^{2+}$ solution, the hydraulic conductivity of all specimens except for weathered soil maintained similarly like before. Consequently, the initial breakthrough point of Cd in weathered soil specimen was observed at about 5hrs after the test started while that of fly ash specimens was not observed during the whole test period of 500hrs. The results implied that fly ash had a sufficient retardation capacity against contaminant transport possibly by its high sorption capacity although it showed little effect on the reduction of hydraulic conductivity. Based on the test results, it could be concluded that the fly ash can be possibly used as a suitable barrier material in containment system to attenuate the contaminant transport for its high retardation capacity and for the low cost.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.6
• /
• pp.215-218
• /
• 2004

This paper presents a three-dimensional numerical simulation for thermal oxidation process. A new elasto-viscoplastic model for robust numerical oxidation simulation is proposed. The three-dimensional effects of oxidation process such as mask lifting effect and corner effects are analyzed. In nano-scale process, the oxidant diffusion is punched through to the other side of the mask. The mask is lifted so the thickness of oxide region is greatly enhanced. The compressive pressure during the oxidation is largest in the mask corner of the island structure. This is because the masked area near the corner is surrounded by an area larger than the others in the island structure. This stress induces the retardation of the oxide growth, especially at the masked corner in the island structure.