• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.57-68
• /
• 2004

When an embankment is constructed on soft clay ground, the lateral displacement generally called as lateral flow is generated in the foundation ground. It strongly affects stabilities of structures, such as foundation piles and underground pipes, in and on the foundation ground. The lateral earth pressure induced by the lateral flow is influenced by the magnitude and construction speed of embankment, the geometric conditions and geotechnical characteristics of the embankment, and the foundation ground, and so on. Accurate methods for estimating the lateral earth pressure have not ever been established because the lateral flow of a foundation ground shows very complicated behavior, which is caused by the interaction of shear deformation and volumetric deformation. In this paper, a series of model tests were carried out in order to clarify effects of construction speed of an embankment on the lateral earth pressure in a foundation ground were design. It was found that the magnitude and the distribution of the lateral earth pressure and its change with time are dependent on the construction speed of the embankment. It was found that a mechanism for the lateral earth pressure was generated by excess pore water pressure due to negative dilatancy induced by shear deformation under the different conditions of construction speeds of embankments.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.45-53
• /
• 2015

Purpose - Online shopping enables consumers to conveniently purchase products irrespective of the time and place. As a result, several online shopping companies have emerged to cater to this growing market and, therefore, the competition among them has become increasingly intense. This paper evaluates the comparative efficiency of online shopping companies for a multi-year period (2009-2013), in order to help online shopping managers identify major drivers for enhancing management efficiency and the subsequent competitiveness. Research design, data, and methodology - The researchers collected the data from 2009 to 2013 from the distribution yearbook. This paper analyzes the marketability (sales figures), profitability (business profits), and management conditions (net profits) of domestic online shopping enterprises by incorporating information on human resources (number of employees) and material resources (total assets and capital). Therefore, the number of employees, total assets, and capital are selected as input variables, and sales figures, business profits, and net profits as the output variables. In this study, Data Envelopment Analysis (DEA) was used to measure the comparative efficiency of domestic online shopping companies. In addition, the Malmquist Productivity Index was used to evaluate the trend of change of Decision Making Units' (DMUs') efficiency for a multi-year period. Results - First, as of 2013, Interpark (2.415) was found to be the most efficient online shopping enterprise, followed by Aladdin Communications (2.117), Hyundai Home shopping (1.867), Home&Shopping (1.176), NS Home shopping (1.170), Commerce Planet (1.126), CJ O Shopping (1.105), Ebay Korea (1.088), and GS Home Shopping (1.051). Second, this study recognizes how the management efficiency has changed for the period 2009-2013. Third, the lesser the capital and employees, the more are the net profits, and the better is the management efficiency of domestic online shopping companies. Lastly, the productivity of such companies is influenced by endogenous factors rather than exogenous factors such as shifts in business environment and technological advances. Conclusions - DHC Korea influenced various distribution channels to reach customers through the Internet. Consequently, this helped in increasing the awareness about its products, in addition to an increase in sales. These achievements can be attributed to the characteristics of online shopping companies. Although it is easy for these companies to suggest goods for one-off purchases, they however have difficulties in retaining customers. Overcoming this challenge can be one of the ways to benchmark a successful case of an efficient company. For example, an online shopping company can attract customers by developing a corresponding mobile application as a convenient way to shop online. Additionally, they can satisfy customers by quick delivery of purchased products, which is possible by building an effective logistics network. Our study indicates that the productivity of an online shopping company was influenced by endogenous factors driven by improvements in managerial practices rather than exogenous factors. Accordingly, online shopping companies should adopt strategies to improve their operational efficiency rather than sales volume-oriented management.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1583-1590
• /
• 2006

T4 endonuclease V (T4 endo V) [EC 3. 1. 25. 1], found in bacteriophage T4, is responsible for excision repair of damaged DNA. The enzyme possesses two activities: a cyclobutane pyrimidine dimer DNA glycosylase (CPD glycosylase) and an apyrimidic/apurinic endonuclease (AP lyase). T4 denV (414 bp cDNA) encoding T4 en do V (138 amino acid) was synthesized and expressed using either an expression vector, pTriEx-4, in E. coli or a baculovirus AcNPV vector, pBacPAK8, in insect cells. The recombinant His-Tag/T4 endo V (rHis-Tag/T4 endo V) protein expressed from bacteria was purified using one-step affinity chromatography with a HiTrap Chelating HP column and used to make rabbit anti-His-Tag/T4 endo V polyclonal antibody for detection of recombinant T4 endo V (rT4 endo V) expressed in insect cells. In the meantime, the recombinant baculovirus was obtained by cotransfection of BacPAK6 viral DNA and pBP/T4 endo V in Spodoptera frugiperda (Sf21) insect cells, and used to infect Sf21 cells to overexpress T4 endo V protein. The level of rT4 endo V protein expressed in Sf21 cells was optimized by varying the virus titers and time course of infection. The optimal expression condition was set as follows; infection of the cells at a MOI of 10 and harvest at 96 h post-infection. Under these conditions, we estimated the amount of rT4 endo V produced in the baculovirus expression vector system to be 125 mg/l. The rT4 endo V was purified to homogeneity by a rapid procedure, consisting of ion-exchange, affinity, and reversed phase chromatographies, based on FPLC. The rT4 endo V positively reacted to an antiserum made against rHis-Tag/T4 endo V and showed a residual nicking activity against CPD-containing DNA caused by UV. This is the first report to have T4 endo V expressed in an insect system to exclude the toxic effect of a bacterial expression system, retaining enzymatic activity.

• Structural Engineering and Mechanics
• /
• v.57 no.1
• /
• pp.1-20
• /
• 2016

On the basis of the geological conditions of high and steep mountainous slope on which an exit portal of an express railway tunnel with a bridge-tunnel combination is to be built, the composite structure of the exit portal with a bridge abutment of the bridge-tunnel combination is presented and the stability of the slope on which the express railway portal is to be built is analyzed using three dimensional (3D) numerical simulation in the paper. Comparison of the practicability for the reinforcement of slope with in-situ bored piles and diaphragm walls are performed so as to enhance the stability of the high and steep slope. The safety factor of the slope due to rockmass excavation both inside the exit portal and beneath the bridge abutment of the bridge-tunnel combination has been also derived using strength reduction technique. The obtained results show that post tunnel portal is a preferred structure to fit high and steep slope, and the surrounding rock around the exit portal of the tunnel on the high and steep mountainous slope remains stable when rockmass is excavated both from the inside of the exit portal and underneath the bridge abutment after the slope is reinforced with both bored piles and diaphragm walls. The stability of the high and steep slope is principally dominated by the shear stress state of the rockmass at the toe of the slope; the procedure of excavating rockmass in the foundation pit of the bridge abutment does not obviously affect the slope stability. In-situ bored piles are more effective in controlling the deformation of the abutment foundation pit in comparison with diaphragm walls and are used as a preferred retaining structure to uphold the stability of slope in respect of the lesser time, easier procedure and lower cost in the construction of the exit portal with bridge-tunnel combination on the high and steep mountainous slope. The results obtained from the numerical analysis in the paper can be used to guide the structural design and construction of express railway tunnel portal with bridge-tunnel combination on high and abrupt mountainous slope under similar situations.

• Korean Journal of Labor Studies
• /
• v.24 no.2
• /
• pp.215-245
• /
• 2018

The purpose of this study is to provide policy implications on the settlement of regional labor market of young women through detailed study on the experience of regional labor market in Jeollanam-do Province. For this purpose, this study analyzed the labor mobility experience in the regional labor market of young women, which lacked specific case studies. In this study, we have identified the causes of job changes by dividing the labor mobility of young women into intra-career moves and inter-career moves. For the causes of labor mobility we divided into two aspects: problems in preparation for employment and employment conditions. The inter-career moves included more diverse factors than intra-career moves. In the inter-career moves, problems in preparation for employment were highlighted as the causes of job changes. In the case of moving within the career, young women would leave because of the employment conditions such as the expiration of the employment period, but the turnover appears to be the way of retaining their previous career. On the other hand, in the case of intra-career moves, the strong desire to maintain the career was shown, and at the same time, the possibility of leaving the region was also high. Based on the case study, this study proposed systematic career counseling for career match, and construction of career management system to support continuous career development.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.385-392
• /
• 2018

The slope stabilization analysis was performed by conducting survey and selecting the representative section in order to improve slope composition and management technology of masonry embankments in the quarry area, The mean slope of the masonry retain wall (A, B, C, D, E, F) was $38.5^{\circ}$, although the steep slope of the lowest slope (A) as $59^{\circ}$. The horizontal distance of the masonry embankments is 66.2 m and the slope height is 48.3 m. However, the inclination of the masonry embankments is relatively steep and visually unstable. The slope stability analysis for the slope stability analysis was taken into account during the drying and saturation. The slope stability analysis during saturation was performed by modeling the fully saturated slope. The strength constants of the ground were divided into two groups. The safety factor for dry period was 1.850 and the safety factor for rainy season was 1.333. The safety rate of dry period and rainy season was above 1.5 and 1.2. However, the weathered granite on the upper part of the masonry embankments at the time of heavy rainfall is considered to have a high risk of slope erosion and collapse. Therefore, it is considered necessary to take measures for stabilization through appropriate maintenance such as drainage installation.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.119-127
• /
• 2006

Granulated Blast Furnace Slag (GBFS) is produced in the manufacture process of pig-iron and shows a similar particle formation to that of natural sea sand and also shows light weight, high shear strength, well permeability, and especially has a latent hydraulic property by which GBFS is solidified with time. Therefore, when GBFS is used as a backfill material of quay or retaining walls, the increase of shear strength induced by the hardening is presumed to reduce the earth pressure and consequently the construction cost of harbor structures decreases. In this study, using the model sand box (50 cm$\times$50 cm$\times$100 cm), the model wall tests were carried out on GBFS and Toyoura standard sand, in which the resultant earth pressure, a wall friction and the earth pressure distribution at the movable wall surface were measured. In the tests, the relative density was set as Dr=25, 55 and 70% and the wall was rotated at the bottom to the active earth pressure side and followed by the passive side. The maximum horizontal displacement at the top of the wall was set as ${\pm}2mm$. By these model test results, it is clarified that the resultant earth pressure obtained by using GBFS is smaller than that of Toyoura sand, especially in the active-earth pressure.

• Journal of Nutrition and Health
• /
• v.6 no.2
• /
• pp.45-56
• /
• 1973

Salted fish and shellfish have been widely used in Korea from olden times as side-dishes, although the processes and methods of pickling have varied depending on localities. The common raw materials for these subsidiary food articles include anchovy, shrimp, yellow corvina, oysters, octopus, top-shell, shellfish, pollack roe and pollack intestines. It must be pointed out here, however, that the salted stuffs now marketed locally are highly unscientific and unsanitary in the way they are processed and sold, and this has prompted this writer to undertake a study on these native food articles. The following findings have been obtained from this study on the changes in Formonitrogen and Protease Activity, effected by the density of salt and the degree of storing temperature, of the pickles of cedfish gills, codfish intestines, pollack intestines, shellfish, oysters, cuttle fish and octopus. 1) Codfish Gills The Protease Activity of the pickled codfish gills was greater in the groups of lesser doses of salt and higher degrees of storing temperature. The same was true in the case of Formonifrogen, too. The Formonitrogen of the pickled codfish gills was larger in the groups of lesser salt and higher teimperature. 2) Codfish Intestines The amount of Formonitrogen of the pickled codfiah intestines became greater, as time went by, in the groups of lesser salt than those of larger doses of salt, with the speed of its formation getting faster as the storing temperature rose from $5^{\circ}C$ to $15^{\circ}C$ and $30^{\circ}C$. The Protease Activity was also greater in the groups of lesser salt and higher temperature. The group, stored at 10% salt and $30^{\circ}C$, rotted in five days. 3) Pollack Intestines The amount of Formonitrogen of the pickled pollack intestines was greater in the groups of lesser amount of salt and higher degrees of storing temperature. The Protease Activity of the pickled pollack intestines began decreasing from the 11th day after the pickling in the groups stored at colmparatively high degrees of temperature$(15^{\circ}C-30^{\circ}C)$, while that of the group stored at $5^{\circ}C$ kept rising. The effects of the amount of salt were little. The group stored at 15% salt and $30^{\circ}C$ started rotting on the 13th day while that stored at $30^{\circ}C$ decayed on the 7th day. The group stored at 20% salt and $30^{\circ}C$ rotted on the 9th day. 4) Oysters The amount of Formonitrogen of the pickled oysters became greater as the storing temperature rose and the doses of salt were lowered. The Protease Activity was not affected at any measurable degree by the density of salt in the group stored at $5^{\circ}C$, but became greater as the storing temperature rose to $15^{\circ}C$ and $30^{\circ}C$. The group stored at 10% salt and $30^{\circ}C$ rotted on the 5th day while that stored at 20% salt and $30^{\circ}C$ on the 13th day. 5) Shellfish The amount of Formonitrogen of the pickled shellfish became greater, as time went by, it the groups of lower consistency of salt than the groups of higher density of salt, although the decay of the former groups was faster than the latter groups. The density of salt best fitted for the pickling appeared to be about 20% with the storing temperature to be $15^{\circ}C$, at which the pickled stuff became most tasty on the 7th day. The oysters stored in three groups at $5^{\circ}C$, $15^{\circ}C$ and $30^{\circ}C$ respectively showed the greatest Protease Activity alike at 0% of salt, but the activity declined as the density of salt increased. The Protease Activity of each group rose for the first 11 days after the pickling, but began declining from the 13th day onward, with the groups of higher temperature retaining higher Protease Activity than the groups of lower temperature. 6) Cuttlefish Both the amount of Formonitrogen and the degree of Protease Activity of the pickled cuttlefish were greater in the groups of lower density of salt and higher degree of storing temperature. The oysters pickled at 10% salt and $15^{\circ}C$ degenerated on the 13th day while that of 10% salt and $30^{\circ}C$ deteriorated on the 7th day. 7) Octopus Both the Formonitrogen and the Protease Activity of the pickled octopus were greater in the groups of lower density of salt, but as time went by, the Protease Activity in all groups dwindled after a climbing. In general, the Formonitrogen and the Protease Activity of the pickled oysters became greater as the storing temperature got higher. One group stored at 10% salt and $15^{\circ}C$ rotted in 13days while another group stored at $30^{\circ}C$ decayed in 7 days.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.797-803
• /
• 2016

In this study, we investigated the effect of fermentation conditions on the amylolytic and proteolytic activities of Aspergillus luchuensis strain 74-5 and Aspergillus oryzae strain 75-2, which are used in the preparation of the starter culture, for Takju (Korean traditional rice wine). The starter culture was optimized using different conditions, such as inoculum size, inoculation temperature, and incubation time. The enzyme activities under each condition were measured. In the A. luchuensis strain 74-5 starter culture, the ${\alpha}-amylase$ and glucoamylase activities increased, however the activity of acidic protease decreased as the diluent to starter culture ratio increased. In the A. oryzae 75-2 starter culture, all enzyme activities were maintained at a higher level even at 5% inoculation ratio. Higher enzyme activities were observed in the middle range of inoculation temperature (35, $40^{\circ}C$), than in the lower range (20, $30^{\circ}C$). Enzyme activity in the starter culture varied with incubation time, however it was the highest at 144 and 120 hr, respectively, for A. luchuensis strain 74-5 and A. oryzae strain 75-2. The spore count of the starter culture was approximately $2{\times}10^7$ during fermentation, out of which contamination by aerobic bacteria was about $3{\times}10^3$. The results suggested that the starter culture of each strain could be used as an inoculum for fermentation. However, we needs to conduct further research for the selection of suitable diluting agents as well as drying methods to reduce the contamination by aerobic bacteria, while retaining the enzyme activity.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2012

As exhibition industry, which is a part of 17 new growth engines of the government, is related to other industries such as tourism, transportation and financial industries. So it has a significant ripple effect on other industries. Exhibition is a knowledge-intensive, eco-friendly and high value-added Industry. Over 13,000 exhibitions are held every year around the world which contributes to getting foreign currency. Exhibition industry is closely related with culture and tourism and could be utilized as local and national development strategies and improve national brand image as well. Many countries try various efforts to invigorate exhibition industry by arranging related laws and support system. In Korea, more than 200 exhibitions are being held every year, but only 2~3 exhibitions are hosted with over 400 exhibitors and except these exhibitions most exhibitions have few foreign exhibitors. The main reason of weakness of domestic trade show is that there are no agencies managing exhibitionrelated statistics and there is no specific and reliable evaluation. This might cause impossibility of providing buyer or seller with reliable data, poor growth of exhibitions in terms of quality and thus service quality of trade shows cannot be improved. Hosting a lot of visitors (Public/Buyer/Exhibitor) is very crucial to the development of domestic exhibition industry. In order to attract many visitors, service quality of exhibition and visitor's satisfaction should be enhanced. For this purpose, a variety of real-time customized services through digital media and the services for creating new customers and retaining existing customers should be provided. In addition, by providing visitors with personalized information services they could manage their time and space efficiently avoiding the complexity of exhibition space. Exhibition industry can have competitiveness and industrial foundation through building up exhibition-related statistics, creating new information and enhancing research ability. Therefore, this paper deals with customized service with visitor's smart-phone at the exhibition space and designing mobile framework which enables exhibition devices to interact with other devices. Mobile server framework is composed of three different systems; multi-server interaction, server, client, display device. By making knowledge pool of exhibition environment, the accumulated data for each visitor can be provided as personalized service. In addition, based on the reaction of visitors each of all information is utilized as customized information and so the cyclic chain structure is designed. Multiple interaction server is designed to have functions of event handling, interaction process between exhibition device and visitor's smart-phone and data management. Client is an application processed by visitor's smart-phone and could be driven on a variety of platforms. Client functions as interface representing customized service for individual visitors and event input and output for simultaneous participation. Exhibition device consists of display system to show visitors contents and information, interaction input-output system to receive event from visitors and input toward action and finally the control system to connect above two systems. The proposed mobile framework in this paper provides individual visitors with customized and active services using their information profile and advanced Knowledge. In addition, user participation service is suggested as well by using interaction connection system between server, client, and exhibition devices. Suggested mobile framework is a technology which could be applied to culture industry such as performance, show and exhibition. Thus, this builds up the foundation to improve visitor's participation in exhibition and bring about development of exhibition industry by raising visitor's interest.