• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.540-546
• /
• 2008

Enrichment planting has been used as one of the promising restoration techniques to accelerate the natural restoration process of secondary forests or logged-over forests in Myanmar, The objectives of this study were to examine the growth performances of two commercial species such as Teak (Tectona grandis Linn f.) and Padauk (Pterocarpus macrocarpus Kurz) in response to different canopy opening treatments and to examine the suitability of these species in enrichment planting activities for the restoration of degraded tropical forests in Myanmar. In this study, split plot design was applied, and three levels of canopy openings were experimented. The survival rate and height growth of two species were measured four times with 6 month interval. The root collar diameter (RCD) was also measured in the last assessment. Although the survival rate of seedlings was not significantly different among the three treatments (p>0.05) as well as between two species (p>0.05) for all consecutive measurements, height (p<0.05) and RCD were significantly different (p<0.001) among the treatments, T. grandis seedlings thrived best under complete canopy opening (i.e., 5 m width canopy opening with strip-clear cutting) while P. macrocarpus seedlings under partial canopy opening (without felling of marketable tree species). Because this study is concerned with only for young stage of seedlings, continuous assessment and follow-up tending activities are needed to verify the species suitability and optimum width of canopy opening for enrichment planting activities in restoration of degraded forests of Myanmar.

• The Korean Journal of Ecology
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2002

The ecological background of a restoration project is complex and difficult to betermine without experimentation. A useful context for experiments is the well-studied process of natural succession, because the factors that drive or inhibit succession are also at work during reclamation (a form of primary succession) and restoration (which often resembles secondary succession). Using experimental studies on urban wasteland reclamation, we have tested for factors that stimulate or inhibit succession during early phases of woodland development in the Northeastern United states. The emphasis has been on mutualisms (seed dispersal, pollination, and mycorrhizae) and microsite limitations in the recruitment, growth, and reproduction of woody plants. Using plantings of seeds, seedlings, and clusters of reproductively mature plants on abandoned landfills, we have observed that (1) soil microsite deficiencies lead to very poor germination (<0.1$\%$) and seedling survival (<0.01$\%$) of most native species; (2) seed dispersal by birds is a significant and reliable source of woody plant recruitment; however (3) proximity effects are strong, with most (up to 95$\%$) of seed rain falling in the vicinity of planted clusters that are closest to putative seed sources; and (4) remnant natural woodlands are critical components of the recruitment process. To emphasize the last point, in one case, we found that the destruction of approximately 50$\%$ of nearby natural woodland vegetation led to a commensurate decline in seed rain. In another case, we found that the species richness of recruits was strictly limited by the species composition of nearby source plant communities, with no evidence of community enrichment by long distance dispersal over 5 years. We conclude from these results that the size and proximity of remnant natural populations are critical considerations when planning reclamation and restoration programs that rely on natural successional processes.

• Conservation Science in Museum
• /
• v.20
• /
• pp.93-106
• /
• 2018

The musical instruments displayed in Korean Museums consist of various materials such as wood, stone, metal, leather, and soil. As for instruments manufactured of organic materials, as time passed, they became damaged due to physical, chemical and biological effects. In order to restore these instruments, studies on the materials as well as the manufacturing techniques should be simultaneously conducted because of the characteristics of sound making instruments. In this study, 17th century Double bass were chosen as the model for the restoration study. The type of wood was identified and the finishing layer was analyzed. To investigate the finishing layer, the surface observation was conducted and the component analysis was also conducted by using both FT-IR and SEM-EDS. As a result, the species of wood were identified as the maple trees. In case of the finishing layer of it, the diluted Goma Lacca, a type of resin, with alcohol as the main solvent was covered for varnishing layer. These results were combined to determine the restoration of Double bass Maggini Giovanni Paolo varnishing layer and by this Violin was made.

• Archives of design research
• /
• v.16 no.1
• /
• pp.219-228
• /
• 2003

Nowadays, the progress of high technology in modern society provides humankind with the opportunity to obtain diverse information easily and quickly. Among those rapidly progressing fields of high technology, digital media field has the ability to substitute for the multimedia information society by being applied to many related fields and daily life. Specifically, the concern and enthusiasm for the restoration of cultural property has risen. So, effective methods are required to decide on the preservation, restoration and academic value of cultural property. Among these, image processing technology using computers has been introduced. The restoration of cultural property using this technique has been studied vigorously in many advanced countries because this would allow us to restore damaged parts without destroying the original asset. However, in Korea, though we have numerous examples of cultural property with recorded history, research related to the items has scarcely been conducted. Accordingly, this study focuses on the investigation of virtual reality and the techniques applicable to restoring cultural property in addition to suggesting the significance and possibility of digitally restoring cultural property following the introduction of applicable examples both domestically and abroad.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.63-74
• /
• 2007

Fast Fourier transform(FFT) is powerful, fast computation framework for convolution in many image restoration application. However, an actually observed image acquired with finite aperture of the acquisition device from the infinite background and it lost data outside the cropped region. Because of these the boundary artifacts are produced. This paper reviewed and summarized the up to date the techniques that have been applied to reduce of the boundary artifacts. Moreover, we propose a new block-based fast image restoration using combined extrapolation and edge-tapering without boundary artifacts with reduced computational loads. We apply edgetapering to the inner blocks because they contain outside information of boundary. And outer blocks use half-convolution extrapolation. For this process it is possible that fast image restoration without boundary artifacts.

• Archives of Craniofacial Surgery
• /
• v.16 no.1
• /
• pp.11-16
• /
• 2015

Background: Source material used to fill calvarial defects includes autologous bones and synthetic alternatives. While autologous bone is preferable to synthetic material, autologous reconstruction is not always feasible due to defect size, unacceptable donor-site morbidity, and other issues. Today, advanced three-dimensional (3D) printing techniques allow for fabrication of titanium implants customized to the exact need of individual patients with calvarial defects. In this report, we present three cases of calvarial reconstructions using 3D-printed porous titanium implants. Methods: From 2013 through 2014, three calvarial defects were repaired using custom-made 3D porous titanium implants. The defects were due either to traumatic subdural hematoma or to meningioma and were located in parieto-occipital, fronto-temporo-parietal, and parieto-temporal areas. The implants were prepared using individual 3D computed tomography (CT) data, Mimics software, and an electron beam melting machine. For each patient, several designs of the implant were evaluated against 3D-printed skull models. All three cases had a custom-made 3D porous titanium implant laid on the defect and rigid fixation was done with 8 mm screws. Results: The custom-made 3D implants fit each patient's skull defect precisely without any dead space. The operative site healed without any specific complications. Postoperative CTs revealed the implants to be in correct position. Conclusion: An autologous graft is not a feasible option in the reconstruction of large calvarial defects. Ideally, synthetic materials for calvarial reconstruction should be easily applicable, durable, and strong. In these aspects, a 3D titanium implant can be an optimal source material in calvarial reconstruction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2086-2097
• /
• 2021

The current cultural assets are being restored depending on the opinions of experts (craftsmen). We intend to introduce digitalized artificial intelligence techniques, excluding the personal opinions of experts on reconstruction of such cultural properties. The first step toward restoring digitized cultural properties is separation. The restoration of cultural properties should be reorganized based on recorded documents, period historical backgrounds and regional characteristics. The cultural properties in the form of photographs or images should be collected by separating the background. In addition, when restoring cultural properties most of them depend a lot on the tendency of the restoring person workers. As a result, it often occurs when there is a problem in the accuracy and reliability of restoration of cultural properties. In this study, we propose a search method for learning stored digital cultural assets using AI technology. Pagoda was selected for restoration of Cultural Properties. Pagoda data collection was collected through the Internet and various historical records. The pagoda data was classified by period and region, and grouped into similar buildings. The collected data was learned by applying the well-known CNN algorithm for artificial intelligence learning. The pagoda search used Yolo Marker to mark the tower shape. The tower was used a total of about 100-10,000 pagoda data. In conclusion, it was confirmed that the probability of searching for a tower differs according to the number of pagoda pictures and the number of learning iterations. Finally, it was confirmed that the number of 500 towers and the epochs in training of 8000 times were good. If the test result exceeds 8,000 times, it becomes overfitting. All so, I found a phenomenon that the recognition rate drops when the enemy repeatedly learns more than 8,000 times. As a result of this study, it is believed that it will be helpful in data gathering to increase the accuracy of tower restoration.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.174-187
• /
• 2017

For the purpose of evaluating the restoration effect of vegetation, in this study, the areas where vegetation was restored had been monitored for 6 years, from 2008 to 2013. The areas were restored through some techniques by utilizing forest resources and nearby forest resources: biotope restoration method, forest topsoil paving method and small diameter trees planting method. Biotope restoration method is indicated the most similar properties to the existing natural forest just after they were restored because the forest likely to be deteriorated was transplanted. Forest topsoil paving method is expected that long-time will be taken for plants to grow to form the tree layer. However, the method is expected to acquire high restore the places of empty lands such as cutting areas. Community planting method is coverage can be increased for short time, relying on the sizes of planted trees, and the tree layer can be formed. Consequently, this method is expected to create high effect if the sizes of trees are considered after the right judgement of candidate site for restoration. This study is meaningful in that each type of restoration is monitored to observe the change of triggered by the succession process to forest. The study results can play as the reference data which can be utilized and applied to the area requiring vegetation restoration or to the area facing the damage of forest resources.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.288-297
• /
• 2005

Rehabilitation of the paralyzed face as a result of trauma or surgery remains a daunting task. Complete restoration of emotionally driven symmetric facial motion is still unobtainable, but current techniques have enhanced our ability to improve this emotionally traumatic deficit. Problems of mass movement and synkinesis still plague even the best reconstructions. The reconstructive techniques used still represent a compromise between obtainable symmetry and motion at the expense of donor site deficits, but current techniques continue to refine and limit this morbidity. In chronically paralyzed face, direct nerve anastomosis, nerve graft, or microvascular-muscle graft is not always possible. In this case, regional muscle transposition is tried to reanimate the eyelid and lower face. Regional muscle includes maseeter muscle, temporalis muscle and anterior belly of the digastric muscle. Temporalis muscle is preferred because it is long, flat, pliable and wide-motion of excursion. In order to reanimate the upper and lower eyelid, Upper eyelid Gold weight implantion and lower eyelid shortening and tightening is mainly used recently, because this method is very simple, easy and reliable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.1
• /
• pp.139-156
• /
• 2004

All Papers on Ecological Landscape Degign in KILA from 1973 to 2003 are listed herein for finding research issues and trends. The emerging field of Ecological studies of landscape design is based on Landscape Ecology and Watershed Ecology, the Principles of which can be applied to surveying and evaluation, Planning and design, construction and management focusing preservation of wildlife habitat and niche. This field can be classified into six categories: 1. Sustainable site planning and index, 2. Ecological planning process and regulation, 3. landscape ecology and biotope map, 4. Watershed and eco corridor project, 5. Urban forestry and environment, and 6. artificial ground and restoration ecology. The following is the summary of the findings from Paper review: 1. Sustainable index shall be studied about more specified sites. Water recycling facilities, and reservation wet land need to be studied. 2. Policy and legislation research on Ecological design shall be researched by expanding of the application field. Nature park planning and management fields shall be considered as the main theme of green networking Parts. 3. Landscape Ecological studies should be connected to practical surveying data, e.g. the eco-maps published by Environment Ministry. Traditional culture and science should be joined with the modem science. 4. Eco-corridor planning will go with the scenarios and theories of watershed ecology. 5. Urban forestry shall be studied with the wildlife's behavior and habitat. 6. Restoration engineering techniques should be reconsidered with the wildlife's existence and environmental affiliation.