• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.73-78
• /
• 2005

It was aimed to promote Cyrtomium falcatum as a material for interior landscape by validating it indoor adaptability in the indoor environment, especially irrigation times, soil treatment and drainage level. Irrigation times were 2 times per week and 7 times per week. Soil treatment and drainage level were carried out drainage-peatmoss : vermiculite : perlite=1 : 1 : 1(D-PVP), peatmoss : vermiculite : perlite=1 : 1 : 1(PVP), drainage-saprolite : leaf mold=1 : 1(D-SL) and saprolite : leaf mold=1 : 1(SL). 1. Top of growth was better with irrigation 7 times per week than irrigation 2 times per week but indoor adaptability was decreased and shown yellowish green. 2. In case of soil treatment, growth was better with saprolite : leaf mold=1 : 1 but indoor growth adaptability was decreased than peatmoss : vermiculite : perlite=1 : 1 : 1. 3. Plant height and blade length were increased under non-drainage treatment but indoor adaptability, number of new fronds and number of sporophyll were decreased under drainage treatment, regardless of irrigation times and soil treatment. 4. Photosynthetic rate(Pn) was the highest in the drainage-peatmoss : vermiculite : perlite=1 : 1 : 1 treatment of irrigation 2 times per week and was the lowest in the saprolite : leaf mold=1 : 1 treatment of irrigation 7 times per week.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.12-22
• /
• 2005

The purpose of this study is to select suitable planting base for the mat-type rooftop greening in order to popularize rooftop greening system easily. The experiment was conducted from 2004 June to 2005 May under several conditions; 4 soil depths under mats(2cm, 5cm, 10cm, 15cm), two soil mixtures(natural soil 80%+leaf mold 20%, artificial soil) and two light conditions(full sun place, 20% shaded place). In this experiment, 3 types of mats were used ; the herbaceous plants mat(11 plants inclusive of Lotus corniculatus L., Silene armeria L.), the lawn mat with Festica arundinacea and Sedum mat with Sedum kamtschaticum, Sedum sarmentosum, Sedum oryzifolium, Sedum middendorffianum. The result is as follows; in the mat-type rooftop greening, the herbaceous plants mat, lawn mat and sedum mat are the similar number of plant and effect of greening on soil depth 2cm, 5cm and 10cm, 15cm. So suitable soil depth of rooftop greening is 10cm for the load and economical factor. Thus the mat-type rooftop greening possible planting base depth of all 13cm as soil depth 10cm and mat depth 3cm. As soil mixtures, the number and growth of plants were better mat and 'natural soil 80% +leaf mold 20%' than mat and artificial soil. In herbaceous plants mat, Silene armeria L., Dianthus chinensis, Centaurea cyanus L., Lotus corniculatus L. are survival in full sun place and Silene armeria L., Dianthus chinensis, Centaurea cyanus L. are survival in 20% shaded place. In conclusion, selection of suitable soil mixtures and plants is possible extensive management rooftop greening with effect of continuous greening. The mat-type rooftop greening are lightweight and simple preparation without management and can popularize readily.

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1363-1370
• /
• 2015

This study was aimed to determine effects of soil organic amendment as plant growing media component on restoration of planting ground. The changes of soil physical and chemical properties and germination and growth of kentucky bluegrass (Poa pratensis L.) were investigated. For treatments, soil was excavated at depth of 0-50 cm (referred as $S_1$) and at depth of 50-100 cm (referred as $S_2$). Then the half amount of $S_1$ soil was mixed with the soil organic amendment (coir dust 40% (v/v), bottom ash 25%, leaf mold 25%, vermiculite 5%, carbonized rice hull 5%) at a rate of 6% (v/v) (referred as $S_1CC$) and also the half amount of $S_2$ soil was mixed with the soil organic amendment at a rate of 6% (v/v) (referred as $S_2CC$) on pot in a 16 cm diameter and 14 cm height. The experiment was replicated 3 times with 3 pots per replication in randomized block design, and 100 seeds were planted per pot. In results, there was no significant difference in soil pH among the treatments with a slight decrease in soil hydraulic conductivity. However, in the $S_1CC$ treatment, positive increases in soil chemical properties, including electrical conductivity, organic matter, phosphoric acid, total nitrogen, exchangeable cation, and cation exchange capacity. Also, the germination rate, plant height, and number of leaves were higher in the $S_1CC$ treatment than those in other treatments. These results suggest that the addition of organic amendment to the soil at depth of 0-50 cm might be proper for restoring planting ground.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.180-191
• /
• 2022

Wooden cultural heritage are exposed to the external environment as they and there are many difficulties in conservation due to their location and size. Among them, biological damage caused by termites or mold consumes a lot of money and time. Select and use wood preservatives to prevent biological damage: Wood preservatives were selected and the worst environmental conditions, temperature 60±3℃, humidity 55±5%, and light intensity of 0.35 W/m², were subjected to aging treatment to analyze chemical changes. Through the deterioration process, it was confirmed that the change in color difference decreased in the wood preservative treatment compared to the Control group. As a result of measuring the content of the active ingredient contained in the deterioration process of the wood preservative, it was confirmed that the active ingredient content of Gori22 and Bondex Preserve III was higher than that of the comparative Wood Keeper A. Through experiments, the shelf life and treatment period can be predicted by measuring the extent to which wood preservatives affect the change of wood specimens during the deterioration process and the content of active ingredients. In conclusion, various wood preservatives were prepared, and the possibility of selectively selecting wood preservatives according to the environment, topography and period was presented as a major evaluation factor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.67-74
• /
• 2009

Injection molding have been used for manufacturing various fields of automotive interior trims for years. The demands on the injection molding technique are grown with the further development of the automobile technique and the design presentations for cost reduction and environment-friendly. This paper shows that multi-component injection conditions are different from general injection, also shows how to optimize part design and mold design and how to manufacturing through the efficient use of multi-component injection in development process using core back system. To fulfill this purpose, all influential process parameters related to the quality of automobile parts were analyzed in terms of the correlation between them. Base on that, a innovative process will be developed by injection engineers to implement it in practice.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.6
• /
• pp.541-546
• /
• 2012

Objective : The prefabrication of customized cranioplastic implants has been introduced to overcome the difficulties of intra-operative implant molding. The authors present a new technique, which consists of the prefabrication of implant molds using three-dimensional (3D) printers and polymethyl-methacrylate (PMMA) casting. Methods : A total of 16 patients with large skull defects (>100 $cm^2$) underwent cranioplasty between November 2009 and April 2011. For unilateral cranial defects, 3D images of the skull were obtained from preoperative axial 1-mm spiral computed tomography (CT) scans. The image of the implant was generated by a digital subtraction mirror-imaging process using the normal side of the cranium as a model. For bilateral cranial defects, precraniectomy routine spiral CT scan data were merged with postcraniectomy 3D CT images following a smoothing process. Prefabrication of the mold was performed by the 3D printer. Intraoperatively, the PMMA implant was created with the prefabricated mold, and fit into the cranial defect. Results : The median operation time was $184.36{\pm}26.07$ minutes. Postoperative CT scans showed excellent restoration of the symmetrical contours and curvature of the cranium in all cases. The median follow-up period was 23 months (range, 14-28 months). Postoperative infection was developed in one case (6.2%) who had an open wound defect previously. Conclusion : Customized cranioplasty PMMA implants using 3D printer may be a useful technique for the reconstruction of various cranial defects.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.322-328
• /
• 2020

PURPOSE. This study evaluated the shear bond strength between 3D printed provisional resin and conventional provisional resin depending on type of conventional provisional resin and different surface treatments of 3D printed resin. MATERIALS AND METHODS. Ninety-six disc-shaped specimens (Ø14 mm × 20 mm thickness) were printed with resin for 3D printing (Nextdent C&B, Vertex-Dental B. V., Soesterberg, Netherlands). After post-processing, the specimens were randomly divided into 8 groups (n=12) according to two types of conventional repair resin (methylmethacrylate and bis-acryl composite) and four different surface treatments: no additional treatment, air abrasion, soaking in methylmethacrylate (MMA) monomer, and soaking in MMA monomer after air abrasion. After surface treatment, each repair resin was bonded in cylindrical shape using a silicone mold. Specimens were stored in 37℃ distilled water for 24 hours. The shear bond strength was measured using a universal testing machine at a crosshead speed of 0.5 mm/min. Failure modes were analyzed by scanning electron microscope. Statistical analysis was done using one-way ANOVA test and Kruskal-Wallis test (α=.05). RESULTS. The group repaired with bis-acryl composite without additional surface treatment showed the highest mean shear bond strength. It was significantly higher than all four groups repaired with methylmethacrylate (P<.05). Additional surface treatments, neither mechanical nor chemical, increased the shear bond strength within methylmethacrylate groups and bis-acryl composite groups (P>.05). Failure mode analysis showed that cohesive failure was most frequent in both methylmethacrylate and bis-acryl composite groups. CONCLUSION. Our results suggest that when repairing 3D printed provisional restoration with conventional provisional resin, repair with bis-acryl composite without additional surface treatment is recommended.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.424-432
• /
• 1998

To get a satisfactory result in the composite resin restorations, it is necessary to choose correct shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guide or Bioform shade guide, but color differences might be expected even using the same shade in various materials. In this study, five kinds of light-cured composite resins with A2 and B3 shade were used to measure and compare the color each other while one porcelain served as a control. All composite resins (Spectrum TPH (SP), VeridonFil- Photo (VE), Z100 (Z100), Charisma (CH), Prodigy (PRO)) were filled in to the metal mold (12 mm diameter, 2 mm depth), followed by compression, polymerization and polishing with wet sandpaper. The specimens of porcelain were fabricated by using the refractory mold for porcelain. After 24 hours, the specimens were placed on the spectrocolorimeter and spectral reflectance were measured under CIE illuminant D65. After measuring the values of $L^*$, $a^*$, $b^*$ and ${\Delta}E^*$, following results were obtained; 1. The $L^*$, $a^*$ and $b^*$ values of both shade of porcelain specimens showed significantly higher than those of resin specimens(p<0.05). 2. In comparing the resin specimens of the A2 shade, differences were significant except $L^*$ values of SP-CH and PRO-VE, $a^*$ values of the VE-SP and $b^*$ values of the VE-Z100 and SP-PRO(p<0.05), 3. In comparing the resin specimens of the B3 shade, differences were significant except $L^*$ values of PRO-SP, $a^*$ values of the SP-PRO and Z100-VE and b* values of the PRO-SP(p<0.05). 4. In comparing the resin specimens of the A2 shade, color differences between materials (${\Delta}E^*$) showed the lowest value of 1.66, and the highest was 5.16. ${\Delta}E^*$ values of the materials of VE-PRO, CH-PRO, SP-PRO, SP-Z100 and SP-CH were lower than 3.3. 5. In comparing the resin specimens of the B3 shade, the lowest value of the ${\Delta}E^*$ was 0.57 and the highest was 5.92. ${\Delta}E^*$ values of Z100-CH and SP-PRO were lower than 3.3. The present study revealed there was perceptible color difference between materials even if they have the same designated shade based on Vita shade guide. The results of the present study suggested that it would be necessary to establish the reproducible and constant color specification system for an esthetic restoration.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.234-242
• /
• 2022

The study aimed to investigate the split casting method based on the recreation of the iron-seated Buddha (ISB) statue (number 1971) in the Chuncheon Museum. The statue was designed using three-dimensional scan data and reduced to half-size. Using the existing research results, the ISB statue was created by mold production and split casting. The mold was prepared by mixing sand and clay at a ratio of 3:4 and 1:3 on the outside and inside, respectively, and then casting was done. Various casting defects were observed in the ISB casting and similar shapes were seen. The casting defects included veining or finning, misrun, open or external shrinkage, surface or subsurface blowholes, surface pinholes, and shift. The microstructures were identified as branch-shaped dendrite and pearlite organizations, and black graphite was observed between the cementite organizations. The study findings may be relevant in exploring traditional casting and manufacturing techniques of ISB and may aid in the production of the original form of ISB.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.84-96
• /
• 2007

The purpose of this study was to select herbaceous plants that can be used for presenting various views and biodiversity on the extensive rooftop greening. Experiment plots were constructed in July 2005 on the rooftop of the Administration Building in the Seoul Women's University. For this experiment, planters were used to design rooftop greening. The size of a planter is 500mm${\times}$500mm${\times}$100mm and each planter has the water storage plate in the lower part of it. The soil was constructed by mixing pearlite, vermiculite, cocopeat, and leaf mold in the ratio of 6 : 2 : 1 : 1. The plot was divided into the watered plot and the dry plot. Since each plot was constructed 2 times, finally 4 planters were constructed in total. One hundred species were used for the experiment and 9 plants per species were planted in each planter. Plants were organized according to types of plants and the experiment used 86 native herbaceous plants, 6 herbs, and 8 foreign plants. The plots were monitored once a month, from July to November 2005. The length and width of plants were tape-measured and covering rate was calculated by CAD program. "SPSS 10.1" was used for a statistical analysis. The result showed no significant difference between the watered plots and the dry plots. In cases of some plants, there were statistically significant differences between the watered planter and dry planter such as follows : Astilbe chinensis and Polygonatum odoratum which are shade plants were measured as the highest value on the watered pots, and Aquilegia buergeriana, Chrysanthemum zawadskii, Calendula arvensis and Gypsophila cerastioides D.Don which are sunny plants were measured as the highest value on the dry plots. According to the final analysis of the data collected and observed for growth condition during the first year of the research, 51 species including Prunella vulgaris var. lilacina and Veronica linaiaefolia in native herbaceous plant, 5 species with Lavandula angustifolia in herbs, and 3 species with Lantana camara and Muscari armeniacum in foreign plants showed the highest growth condition. In conclusion, it is suggested that various plants including sedums could be effectively used for extensive rooftop greening to improve landscape(a view) of the rooftop and increase ecological values.