• 소음진동
• /
• 제10권5호
• /
• pp.800-805
• /
• 2000

To determine the modal matrix and modal frequency of engine mount system, we most solve so-called eigen-value problem. However eigen-value problem of engine mount system with hydraulic mount can not be solved by general eigne-analysis algorithm because the properties of hydraulic mount vary with frequency. so in this paper the method for modal analysis of rigid body motions of an engine supported by hydraulic mount is proposed. Natural frequencies and mode shapes of this nonlinear system are obtained by using complex exponential method and Laplace transformation method. In time domain, impulse response functions are calculated by (two-sided) discrete inverse Fourier Transformation of forced frequency response functions achieved by Laplace transformation of the differential equation of motion. Considering the fact that frequency response functions synthesized by modal parameters form proposed method are in good agreement with original FRFs, it is proved that the proposed method is very efficient and useful for the analysis of eigne-value problem of hydraulic engine mount system.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.755-773
• /
• 2013

One of the main requirements of the seismic design codes must be its easy application by structural engineers. The use of practically-applicable models or simplified models as single-degree-of-freedom (SDOF) systems is a good alternative to achieve this condition. In this study, deterministic and probabilistic response transformation factors are obtained to evaluate the response in terms of maximum ductility and maximum interstory drifts of multi-degree-of-freedom (MDOF) systems based on the response of equivalent SDOF systems. For this aim, five steel frames designed with the Mexican City Building Code (MCBC) as well as their corresponding equivalent SDOF systems (which represent the characteristics of the frames) are analyzed. Both structural systems are subjected to ground motions records. For the MDOF and the simplified systems, incremental dynamic analyses IDAs are developed in first place, then, structural demand hazard curves are obtained. The ratio between the IDAs curves corresponding to the MDOF systems and the curves corresponding to the simplified models are used to obtain deterministic response transformation factors. On the other hand, demand hazard curves are used to calculate probabilistic response transformation factors. It was found that both approaches give place to similar results.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.232-238
• /
• 2001

Fast Fourier Transformation is employed to convert the head variation of a pipeline in the time domain to the amplitude of the frequency domain. Applying method of characteristics to a pipeline provides a significant frequency range for a surge introduced from the valve modulation. Inverse Fast Fourier Transformation and a Finite Impulse Response Filter can be used to remove any possible noise existing from the significant frequency range of an unsteady condition. A filtered signal shows higher potential for the inverse calculation of leakage detection than the noise-added signal does. The respective performances of Inverse Fast Fourier Transformation and a Finite Impulse Response Filter are compared in terms of leakage detection capability. Characteristics of the frequency range for multiple leakages were investigated to validate the effectiveness of the noise control method in the frequency domain.

• Communications for Statistical Applications and Methods
• /
• 제26권5호
• /
• pp.463-471
• /
• 2019

The variable transformations are useful ways to guarantee the functional relationships in the model. However, the presence of outliers may undermine the accuracy of transformation. This paper deals with response transformations in the partial linear models under the existence of outliers. A new procedure for response transformation and outliers detection is proposed. The procedure uses a sequential method for identifying outliers and dynamic graphical methods for an appropriate transformation. The graphical tools make it possible to catch diagnostic information by monitoring the movement of points in the data. The procedure is illustrated with several examples. Examples show that visual clues regarding the optimal transformation, the fittness of the model and the outlyness of the observations can be checked from the series of plots.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.289-294
• /
• 1998

The distributed-parameter structures expressed with the partial differential equations are considered as the infinite-dimensional dynamic system. For implementation of a controller in multivariate systems, it is necessary to derive the state-space reduced order model. By the eigensystem realization algorithm, we can yield tile subspace system with the Markov parameters derived from the measured frequency response function by the inverse discrete Fourier transformation. We also review the necessary conditions for the convergence of the approximation system and the error bounds in terms of the singular values of Markov-parameter matrices. To determine the natural frequencies and modal damping ratios, the modal coordinate transformation is applied to the realization system. The vibration test for a smart structure is performed to provide the records of frequency response functions used in the subspace system realization.

• 한국음향학회지
• /
• 제23권3호
• /
• pp.253-261
• /
• 2004

본 논문에서는 음성 신호가 지니고 있는 화자 의존적 특징 변수를 변환 시키는 음성 개성 변환 기법이 새롭게 제안되었다. 제안된 방법은 성도 전달 함수의 특성을 반영하는 켑스트럼 벡터와 여기 신호의 특성을 반영하는 피치 값을 변환 대상 변수로 삼았으며, 이들에 대한 변환 기법으로 다중 응답 분류 회귀 트리를 사용하였다. 다중 응답 분류 회귀 트리는 기존의 분류 회귀 트리를 다차원 확장시킨 형태로서, 반응값이 벡터 형태로 존재하는 분류 회귀 트리를 의미한다. 본 논문에서는 기존의 코드북 메핑 방법과 비교하여 제안된 기법의 성능을 평가하였으며, 분류 회귀 트리에 입력되는 관찰값을 다양하게 변화시켜 트리의 복잡도와 변환 성능을 정량적으로 분석하였다. 네 명의 화자를 이용한 음성 개성 변환 실험에서, 기존의 코드북 메핑과 비교하여 객관적으로 우수한 성능을 나타내었으며, 청취 테스트에서도 변환음이 목표로 하는 화자의 음성과 유사함을 관찰할 수 있었다.

• Journal of Dairy Science and Biotechnology
• /
• 제41권1호
• /
• pp.1-8
• /
• 2023

Response surface methodology (RSM) is a statistical approach widely used in food processing to optimize the formulation, processing conditions, and quality of food products. The homogenization process is achieved by subjecting milk to high pressure, which breaks down fat globules and disperses fat more evenly throughout milk. This study focuses on an application of RSM including the logit transformation to predict the efficiency of milk homogenization, which can be maximized by minimizing the relative difference in fat percentage between the top part and the remainder of milk. To avoid a negative predicted value of the minimum of this proportion, the logit transformation is used to turn the proportion into the logit, whose possible values are real numbers. Then, the logit values are modeled and optimized. Subsequently, the logistic transformation is used to turn the predicted logit into the predicted proportion. From our model, the optimum condition for the maximized efficiency of milk homogenization was predicted as the combination of a homogenizer pressure of 30 MPa, a storage temperature of 10℃, and a storage period of 10 days. Additionally, with a combination of a homogenizer pressure of 30 MPa, a storage temperature of 10℃, and a storage period of 50 days, the level of milk homogenization was predicted to be acceptable, even with the problem of extrapolation taken into account.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.96-111
• /
• 2022

With the rapid development of the Fourth Industrial Revolution and digital transformation, scientific and technological innovation measures are being devised to overcome Korea's low-growth, high-cost structure. Accordingly, by examining the R&D investment evaluation system of R&D PIE (R&D Platform for Investment and Evaluation), which has been promoted by the Korean government in response to the Fourth Industrial Revolution, from the perspective of R&D transformation, this study aims to explore a new path for a sustainable national science and technology innovation system following digital transformation. In particular, from the perspective of R&D PIE, a MLP (Multi-level Perspective), which had been conducted as an abstract theoretical study, was attempted with specific cases and analysis for each of the three layers: niche, landscape, and regime. In conclusion, R&D PIE was intended to elevate the abstract R&D investment evaluation system to a platform that leads innovation in the digital space of the Fourth Industrial Revolution. In addition, it was confirmed that the R&D PIE could be replaced or enhanced as a platform for innovation in response to the Fourth Industrial Revolution, thereby providing an alternative to job creation and an escape from economic crisis.

• 한국전산구조공학회논문집
• /
• 제36권1호
• /
• pp.57-65
• /
• 2023

본 연구는 딥러닝을 위한 비선형 변환 접근법을 사용하여 Single-lap joint의 접착 영역을 조사하기 위한 진동 응답 기반 탐지 시스템을 제시한다. 산업 혹은 공학 분야에서 분해가 쉽지 않은 구조 내에 보이지 않는 부분의 상태와 접착된 구조의 접착 부위 상태를 알기 어려운 문제가 있다. 이러한 문제를 해결하기 위해 본 연구는 비선형 변환을 이용하여 기준 시편의 진동 응답으로 다양한 시편의 접착 면적을 조사하는 탐지 방법을 제안한다. 이 연구에서는 CNN 기반 딥러닝으로 진동 특성을 파악하기 위해 비선형 변환을 적용한 주파수 응답 함수를 사용했고 분류를 위해 가상의 스펙트로그램을 사용했다. 또한, 제시된 방법을 검증하기 위해 알루미늄, 탄소섬유복합재 그리고 초고분자량 폴리에틸렌 시편에 대한 진동 실험, 분석적 해, 유한요소해석을 수행했다.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.165-172
• /
• 2023

This paper presents a novel method for modeling elastic wave propagation in long beams. The proposed method derives a solution for the transient transverse displacement of the beam's neutral axis without assuming the separation of variables (SV). By mapping the governing equation from the space domain to the frequency domain using Fourier transformation (FT), the transverse displacement function is determined as a convolution integral of external loading functions and a combination of trigonometric and Fresnel functions. This method determines the beam's response to general loading conditions as a linear combination of the analytical response of a beam subjected to an abrupt localized loading. The proposed solution method is verified through finite element analysis (FEA) and wave propagation patterns are derived for tone burst loading with specific frequency contents. The results demonstrate that the proposed solution method accurately models wave dispersion, reduces computational cost, and yields accurate results even for high-frequency loading.