• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.43-52
• /
• 2021

According to several seismic design standards, a ground motion time history should be selected similar to the design response spectrum, or a ground motion time history should be modified by matching procedure to the design response spectrum through the time-domain method. For the response spectrum matching procedure, appropriate seed ground motions need to be selected to maintain recorded earthquake accelerogram characteristics. However, there are no specific criteria for selecting the seed ground motions for applying this methodology. In this study, the characteristics of ground motion time histories between seed motions and spectral matched motions were compared. Intensity measures used in the design were compared, and their change by spectral matching procedure was quantified. In addition, the seed ground motion sets were determined according to the response spectrum shape, and these sets analyzed the response of nonlinear and equivalent linear single degrees of freedom systems to present the seed motion selection conditions for spectral matching. As a result, several considerations for applying the time domain spectral matching method were presented.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.137-144
• /
• 2021

The mode superposition time history analysis method is commonly used in a seismic analysis. The maximum response in the time history analysis can be derived by combining the responses of individual modes. The residual mode response is the response of the modes which are not considered in the time history analysis. In this paper, the residual vector method to consider the residual mode response in the time history analysis is introduced and evaluated. Seismic analyses for a sample structure model and a reactor vessel model are performed to evaluate the residual vector method. The analysis results show that residual mode response is well calculated when the residual vector method is used. It is confirmed that the residual vector method is useful and acceptable to consider the residual mode response in a seismic analysis of the nuclear power plant equipment.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.1-11
• /
• 2016

현 국내 외의 설계기준들은 인공지진파에 의해 계산된 응답스펙트럼이 설계응답스펙트럼보다 작은 값의 수가 5개 이내일 경우 설계응답스펙트럼을 포괄 한다고 규정하고 있다. 현 설계의 문제점을 확인하기 위하여 설계기준을 만족하는 5개의 각기 다른 특성을 가진 인공지진파를 사용하여 교각에 대한 시간이력해석을 수행하고, 부재력을 정량적으로 평가하였다. 설계기준을 만족하는 인공지진파일지라도 구조물의 고유주기와 유사한 주기에서 계산된 응답스펙트럼이 설계응답스펙트럼보다 작을 경우 시간이력해석을 통한 내진의 안전성을 확보하지 못함을 확인하였다. 따라서 본 연구에서는 스펙트럼 가속도 값이 설계응답스펙트럼보다 모든 주기에서 큰 값을 갖는 인공지진파를 생성하는 기법을 이중 수정함수를 적용하여 제안하였다. 또한 제안된 기법에 의해 작성된 인공지진파가 국내 외의 기준들의 적합성을 만족하는지 검토하였다.

• 한국컴퓨터산업학회논문지
• /
• 제2권9호
• /
• pp.1155-1162
• /
• 2001

본 논문은 UNIX 시스템의 최적 이용률(Optimal Utilization)을 결정하는 방법을 제시한다. 제시된 방법은 사용자가 인내할 수 있는 응답시간(Tolerable Response Time)을 제공하는 범위에서 사용자에게 허용될 수 있는 최대 이용률이 최적 이용률이 된다는 정의(Definition)를 근거로 하여 개발되었다. 인내할 수 있는 응답시간이 길어지면 최적 이용률도 높아지므로 최적 이용률은 인내할 수 있는 응답시간의 최대값에서 구해진다. 인내할 수 있는 응답시간은 서비스 목표(Service Objective)가 주어지면 도출해 낼 수 있다. 본 논문에서는 인내할 수 있는 응답시간이 0.24초라는 것과 최적 이용률의 세 가지 구성요소는 %wio, %sys, %usr 이라는 것을 보여준다. 또한 최적 이용률을 결정하는 실제의 과정을 예시하기 위하여 UNIX 운영체제를 사용하는 IBM 컴퓨터의 최적 이용률을 구하는 과정을 예시한다.

• Journal of Information Processing Systems
• /
• 제4권1호
• /
• pp.9-16
• /
• 2008

This paper describes the design and implementation of a two-tier DBMS for handling massive data and providing faster response time. In the present day, the main requirements of DBMS are figured out using two aspects. The first is handling large amounts of data. And the second is providing fast response time. But in fact, Traditional DBMS cannot fulfill both the requirements. The disk-oriented DBMS can handle massive data but the response time is relatively slower than the memory-resident DBMS. On the other hand, the memory-resident DBMS can provide fast response time but they have original restrictions of database size. In this paper, to meet the requirements of handling large volumes of data and providing fast response time, a two-tier DBMS is proposed. The cold-data which does not require fast response times are managed by disk storage manager, and the hot-data which require fast response time among the large volumes of data are handled by memory storage manager as snapshots. As a result, the proposed system performs significantly better than disk-oriented DBMS with an added advantage to manage massive data at the same time.

• 한국공간구조학회논문집
• /
• 제13권4호
• /
• pp.57-66
• /
• 2013

Spatial structures have the different dynamic characteristics from general rahmen structures. Therefore, it is necessary to accurately analyze dynamic characteristics and seismic response for seismic design of spatial structure. Keel arch structure is used as an example structure because it has primary characteristics of spatial structures. In case of spatial structures with different ground condition and time lag, multiple support excitation may be subjected to supports of a keel arch structure. In this study, the response of the keel arch structure under multiple support excitation and with time lag are analyzed by means of the pseudo excitation method. Pseudo excitation method shows that the structural response is divided into two parts, ground displacement and structural dynamic response due to ground motion excitation. It is known that the seismic responses of spatial structure under multiple support excitation are different from those of spatial structure under simple excitation. And the seismic response of spatial structure with time lag are different from those of spatial structure without time lag. Therefore, it has to be necessary to analyze the seismic response of spatial structure under multiple support excitation and time lag because the spatial structure supports may be different and very long span. It is shown that the seismic response of spatial structure under multiple support seismic excitation are different from those of spatial structure under unique excitation.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.357-367
• /
• 2020

The objective of this article is investigation of dynamic response of thick multilayer functionally graded (FG) beam under generalized dynamic forces. The plane stress problem is exploited to describe the constitutive equation of thick FG beam to get realistic and accurate response. Applied dynamic forces are assumed to be sinusoidal harmonic, sinusoidal pulse or triangle in time domain and point load. Equations of motion of deep FG beam are derived based on the Hamilton principle from kinematic relations and constitutive equations of plane stress problem. The numerical finite element procedure is adopted to discretize the space domain of structure and transform partial differential equations of motion to ordinary differential equations in time domain. Numerical time integration method is used to solve the system of equations in time domain and find the time responses. Numerical parametric studies are performed to illustrate effects of force type, graduation parameter, geometrical and stacking sequence of layers on the time response of deep multilayer FG beams.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.169-173
• /
• 2009

We studied driving characteristics according to the ratio of mass and charging (m/q) value for charged toner particles with black and yellow color in charged particle type display panel. After biasing rectangle pulse to the transparency electrodes of putted panel with toner particles, its response time and contrast ratio are simultaneously measured using a laser as a optical source, photodiode as a detector and reflective system. As a results, contrast ratio is largest at the shortest response time region which is different to the particle because of m/q. We proposed relational equation for response time, m/q, cell gap and biasing voltage. It has not been studied and reported to analyze the relationship of response time, biasing voltage, lumping phenomena, cell gap, and contrast ratio for toner particle type display.

• 소음진동
• /
• 제9권4호
• /
• pp.778-784
• /
• 1999

A method for obtaining the motion of an impact system whose primary and secondary system are composed of lumped masses, springs and dampers, and all the contacts are made through spring and damping elements is presented. The frequency response functions derived from the equations of motion and the impulse response functions obtained from the inverse Fourier transform of the derived frequency response functions are used for the calculation of the system responses. The procedure developed for the calculation of displacements and force time-histories was based on the convolution integrals of impulse response functions and forces applied to the systems. Time histories of displacements and contact forces are obtained for the case where a random excitation is applied to a point in the system. Impact statistics such as contact forces and the time between impacts calculated from those time histories is presented.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권5호
• /
• pp.379-386
• /
• 2015

본 논문에서는 스마트폰 사용자 중심의 반응 완료 시간에 대한 동적 분석을 활용하여 사용자가 실제 인지하는 성능 중심의 새로운 최적화 프레임워크를 제안한다. 이를 위하여 먼저 스마트폰 응용프로그램에서 사용자가 실제 인지하는 성능에 대한 평가 지표로써 사용자 중심 반응 시간을 정의한다. 또한, 이러한 사용자 중심 반응 시간의 동적 탐색에 기반하여 사용자가 인지할 수 있는 성능 병목 지점을 최적화의 힌트로써 개발자에게 제공하는 사용자 중심 반응 시간 분석 도구의 설계와 개발에 대하여 소개한다. 제안한 사용자 중심 반응 시간 분석 도구를 갤럭시 넥서스 스마트폰에 구현하여 그 정확도와 계산부하를 평가한 결과, 전체 반응 시간의 1% 미만의 계산 부하로 카메라를 이용하여 측정한 결과 대비 92%의 정확도를 보였다. 제안한 도구의 효율성 평가를 위하여 소스 코드가 공개되어 있는 안드로이드 응용프로그램의 성능 개선에 제안한 도구를 활용하여 최대 16.4%의 성능 향상을 달성하였다.