• Advances in Computational Design
• /
• 제1권1호
• /
• pp.27-35
• /
• 2016

The influences of chloride-free components of the cement additive: triethanolamine, triisopropanolamine, sodium hyposulfite and calcium gluconate on the 1d, 3d and 28d compressive strength of cement were investigated by response surface methodology. It found the early strength activators, triethanolamine and sodium hyposulfite could enhance the 1d strength of cement effectively but they did not contribute to the 3d strength enhancement, and further their interaction was able to decrease the 28d strength of cement. Calcium gluconate was not that effective for the strength enhancement on 3 and 28 days when it's simply dosed. However the interaction effect of calcium gluconate with triisopropanolamine could strongly favor the strength enhancement of cement after 3 days. Results indicated it was necessary to focus attention on the potential interactions among the chemical components. And for the concern of four chemicals studied in this paper, it was feasible to formulated a kind of chloride-free cement additive that can be effective for the early strength of cement and its the strength after 3 days.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.202-205
• /
• 2008

This paper presents an optimization of permanent magnet (PM) in a brushless dc (BLDC) motor using the response surface methodology (RSM). Size and angle of the PM are optimized to minimize the cogging torque, while reducing the magnitude of harmonic at a dominant frequency and maintaining the operating torque. A fitted RS model is constructed by verifying the high reliability of the total variation and the variation of estimated error. The optimized design is validated by carrying out the reanalysis and comparing to the initial model using the nonlinear transient finite element analysis.

• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Composites Research
• /
• 제28권5호
• /
• pp.297-310
• /
• 2015

This study aims to develop efficient composite laminates for buckling load enhancement, interlaminar shear stress minimization, and weight reduction. This goal is achieved through cover-skin lay-ups around skins and stiffeners, which amplify bending stiffness and defer delamination by means of effective stress distribution. The design problem is formulated as multi-objective optimization that maximizes buckling load capability while minimizing both maximum out-of-plane shear stress and panel weight. For efficient optimization, response surface methodology is employed for buckling load, two out-of-plane shear stresses, and panel weight with respect to one ply thickness, six fiber orientations of a skin, and four stiffener heights. Numerical results show that skin-covered composite stiffened panels can be devised for maximum buckling load and minimum interlaminar shear stresses under compressive load. In addition, the effects of different material properties are investigated and compared. The obtained results reveal that the composite stiffened panel with Kevlar material is the most effective design.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권2호
• /
• pp.69-75
• /
• 2006

This paper deals with the optimum design solution on reduction of torque ripple for a Synchronous Reluctance Motor with concentrated winding using response surface methodology. The coupled Finite Elements Analysis (FEA) & Preisach model have been used to evaluate the nonlinear solution. Comparisons are given with characteristics of a SynRM according to the stator winding, slot number, open width of slot, slot depth, teeth width variation in concentrated winding SynRM, respectively. This paper presents an optimization procedure using Response Surface Methodology (RSM) to determine design parameters for reducing torque ripple. RSM has been achieved to use the experimental design method in combination with finite Element Method (FEM) and well adapted to make analytical model for a complex problem considering a lot of interaction of design variables. Moreover, Sequential Quadratic Problem (SQP) method is used to solve the resulting of constrained nonlinear optimization problem.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.596-607
• /
• 2006

This paper presents Single Phase Switched Reluctance Motor (SPSRM) optimum design for vacuum cleaners using Response Surface Methodology (RSM) to determine geometric parameters, and the 2-D Finite Element Method (FEM) has been coupled with the circuit equations of the driving converter. Additionally, an optimum process for SPSRM has been proposed and peformed with geometric and electric parameters thereby influencing the inductance variation and effective torque generation as design variables. SPSRM performances have also been analyzed to determine an optimal design model for maximized efficiency at high power factor. In order to confirm the propriety of the Finite Element Method and motor performance calculation, simulation waveform and experiment waveform for motor voltage and current were compared.

• 한국미생물·생명공학회지
• /
• 제22권5호
• /
• pp.522-530
• /
• 1994

Bacteriocin-producing lactic acid bacteria, Lactococcus sp. HY 449, was isolated from dairy products. Using response surface methodology, the various concentrations of medium compo- nents (tryptone, glucose, yeast extract, tween 80, and initial pH) were tested to find the optimum conditions for maximum bacteriocin production and growth of Lactococcus sp. HY 449. Central composite design was used to control the concentrations of medium components in the experiment. Bacteriocin production and cell growth of Lactococcus sp. HY 449 were most affected by glucose and yeast extract. Estimated optimum growth conditions of Lactococcus sp. HY 449 were as follows; tryptone 1.08%, glucose 1.129%, yeast extract 0.674%, tween 80 0.11%, and initial pH 7.19. Also estimated optimum conditions for bacteriocin production were tryptone 0.937%, glucose 1.108%, yeast extract 0.163%, tween 80 0.09%, and initial pH 6.98.

• 한국식품조리과학회지
• /
• 제20권2호
• /
• pp.158-163
• /
• 2004

The purpose of this study was to determine the organoleptic properties of mushroom pickles made at various compounding ratios according to central composite design for optimum organoleptic properties. In this study, various kinds of mushroom pickle were made at different compounding ratios of vinegar, sugar and salt-critical ingredients of the pickle recipe and the products were presented to an expert panel, who graded the subjects in 7 degrees for 5 items: color, flavor, hardness, taste and overall quality. As a result of sensory quality, mushroom pickles with 300g of vinegar, 150g of sugar and 60g of salt achieved the highest grade. Meanwhile, the results of Response Surface Methodology were different from the sensory quality results, showing that the optimum mixing conditions for overall organoleptic properties of mushroom pickle were 279.58g of vinegar, 179.34g of sugar and 59.09g of salt. (Ed- based on this conflict in results, I suggest that you make a final recommendation, of either the first, the second, or perhaps an intermediate, ratio)

• 한국식생활문화학회지
• /
• 제20권6호
• /
• pp.695-702
• /
• 2005

To determine the optimum mixing conditions of nopal jelly, samples were prepared with various compounding ratios of gelatin(16, 18, 20, 22 and 24g), sucrose(100, 120, 140, 160 and 180g), Citric acid(2, 3, 4, 5 and 6) using a central composite design. Physical and sensory evaluations were performed and considered using a response surface methodology. The optimum mixing rates which meet sensory items is gelatin 20.19g, sucrose 141.52g and citric acid 4.04g.

• 대한화학회지
• /
• 제58권1호
• /
• pp.80-84
• /
• 2014

The process of petroleum involves in a large amount of oily wastewater that contains high levels of chemical oxygen demand (COD) and toxic compounds. So they must be treated before their discharge into the receptor medium. In this paper, wet peroxide oxidation (WPO) was adopted to treat the oily wastewater. Central composite design, an experimental design for response surface methodology (RSM), was used to create a set of 31 experimental runs needed for optimizing of the operating conditions. Quadratic regression models with estimated coefficients were developed to describe the COD removals. The experimental results show that WPO could effectively reduce COD by 96.8% at the optimum conditions of temperature $290^{\circ}C$, $H_2O_2$ excess (HE) 0.8, the initial concentration of oily wastewater 3855 mg/L and reaction time 9 min. RSM could be effectively adopted to optimize the operating multifactors in complex WPO process.