• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.74-81
• /
• 2009

In this study, the seismic performance of RC school buildings which were not designed according to earthquake-resistance design code were evaluated by using response spectrum and push-over analyses. The torsional amplification effect due to plan irregularity is considered and then the efficiency of seismic retrofitting methods such as RC shear wall, steel frame, RC frame and PC wing wall was investigated. The analysis result indicate that the inter-story drift concentrated in the first floor and most plastic hinge forms at the column of the first story. Among the retrofitting methods, the PC wing wall has the highest seismic performance in strength and story drift aspect. Especially, it can make building ductile behavior due to the concentrated inter-story drift at the first column hinge is distributed overall stories. The axial force, shear force and moment magnitude of existing elements significantly decreased after retrofitting. However, the axial and shear force of the elements connected to the additional retrofitting elements increased, and especially the boundary columns at the end of the retrofitting shear wall should be reinforced for assuring the enhancement of seismic performance.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.79-82
• /
• 1997

Image-based three dimensional radiation treatment planning(3D RTP) has a potential of generating superior treatment plans. Advances in computer technology and software developments quickly make 3D RTP a feasible choice for routine clinical use. However, it has become clear that an evaluation of a 3D plan is more difficult than a 2D plan. A number of tools have been developed to facilitate the evaluation of 3D RTP both qualitatively and quantitatively. For example, beam's eye view(BEV) is one of the most powerful and time-saving method as a qualitative tools. Dose-volume histogram(DVH) has been proven to be one of the most valuable methods for a quantitative tools. But it has a limitation to evaluate several different plans for biological effects of the tissue and critical organ. Therefore, there is a strong interest in developing quantitative models which would predict the likely biological response of irradiated organs and tissues, such as tumor control probability(TCP) and normal tissue complication probability(NTCP). DVH and NTCP of hepatoma were evaluated for three dimensional conformal radiotherapy(3D CRT). Also, 3D RTP was analysed as a dose optimization based on beam arrangement and beam modulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.1-15
• /
• 1993

In response to the growing domestic request and the change of the overseas environment, Hyundai Maritime Research Institute has recently established a three-stage development plan for the high speed marine transportation system. As the first stage plan, the long-range high-speed foil catamaran passenger ship has been designed and constructed for the open-sea serivice of 800 nautical miles round trip with top speed above 40 knots. Extensive theoretical analyses and model tests were systematically carried omit along the course of design for the system optimization and the verification. In this paper, the brief summary of the design and the construction works shall be presented.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.166-170
• /
• 2016

A brief emergency planning educational presentation was taught during work hours to a convenience sample of employees of various workplaces in Northern Missouri, USA. Participants were familiarized with details about how an emergency plan is prepared by management and implemented by management-employee crisis management teams - focusing on both employee and management roles. They then applied the presentation information to assess their own organization's emergency preparedness level. Participants possessed significantly (p < 0.05) higher perceptions of their organization's level of emergency preparedness than non-participants. It is recommended that an assessment of organizational preparedness level supplement emergency planning educational presentations in order to immediately apply the material covered and encourage employees to become more involved in their organization's emergency planning and response. Educational strategies that involve management-employee collaboration in activities tailored to each workplace's operations and risk level for emergencies should be implemented.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.29-40
• /
• 2019

In response to the rapid climate change, in order to save energy in the field of buildings, the country is planning not only zero energy buildings but also zero energy cities. In the Urban Development Project, the Energy Use Plan Report is prepared and submitted by predicting the amount of energy demand at the planning stage. However, due to the activation of zero-energy buildings and the increase in the supply of new and renewable energy facilities, the energy consumption behavior of buildings in the city is changing from the previous ones. In this study, to estimate urban energy demand of Zero Energy City, building energy demand forecasts based on "Passive plans for use of energy based primary energy consumption", "Actual building energy usage data from Korea Appraisal Board" and "data from Certification of Building Energy Efficiency Rating" as well as demand forecast according to existing "Consultation about Energy Use Plan Code" were calculated and then applied to Multifunctional Administrative City 5-1 zone to compare urban total energy demand forecasts.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.234-235
• /
• 2019

Smart Maritime Autonomous Surface Ship(MASS) is aiming to provide eco-friendly smart maritime navigation service based on safety, reliability and efficiency for maritime safety and marine environment protection. In the future, it is expected to bring about a radical change across the marine industry such as marine, maritime, port, logistics, ship-building and so forth. Therefore, in this paper, policy priorities related to the introduction of MASS were identified, and response strategies for each industry were set up, and a policy plan for establishing a smart maritime logistics system covering shipping, port and shipbuilding fields was proposed.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1684-1698
• /
• 2018

Fragility functions are determined for braced steel moment frames (SMFs) with plans such as square-, T-, L-, U-, trapezoidal-, and semicircular-shaped, subjected to blast. The frames are designed for gravity and seismic loads, but not necessarily for the blast loads. The blast load is computed for a wide range of scenarios involving different parameters, viz. charge weight, standoff distance, and blast location relative to plan of the structure followed by nonlinear dynamic analysis of the frames. The members failing in rotation lead to partial collapse due to plastic mechanism formation. The probabilities of partial collapse of the SMFs, with and without bracing system, due to the blast loading are computed to plot fragility curves. The charge weight and standoff distance are taken as Gaussian random input variables. The extent of propagation of the uncertainties in the input parameters onto the response quantities and fragility of the SMFs is assessed by computing Sobol sensitivity indices. The probabilistic analysis is conducted using Monte Carlo simulations. The frames have least failure probability for blasts occurring in front of their corners or convex face. Further, the unbraced frames are observed to have higher fragility as compared to counterpart braced frames for far-off detonations.

• Asian Journal of Innovation and Policy
• /
• v.10 no.3
• /
• pp.355-379
• /
• 2021

This study examined the evolution of S&T Basic Acts in Korea from the Science and Technology Promotion Act (1967) through the Special Act on STI (1997) to the Framework Act on Science and Technology (2001) in the following aspects: 1) comprehensive plans, 2) coordination mechanisms for S&T policies, 3) enforcement of R&D programs and performance diffusion, 4) promotion of human resources, 5) and S&T investment and budgeting. Before the Framework Act on S&T was enacted in 2001, critical issues were found in establishing S&T master plans, promotion of R&D programs, comprehensive coordination mechanisms, and R&D budgeting. The three Basic Acts have expanded the scope of regulation over time to cover the entire cycle of the S&T process. They concern a wide range of issues, including creating a basis for scientific and technological development, S&T promotion, disseminating and commercializing research outcomes, and preventing adverse effects from science and technology. The content of the Basic Acts has evolved in response to changes in the political, economic, and social environment of Korean industry during the past five decades.

• The Southeast Asian review
• /
• v.22 no.1
• /
• pp.207-245
• /
• 2012

With rapid industrialization and urbanization, numerous cities are faced with urban slum phenomenon combined with housing shortage fueled by population explosion. In Kuala Lumpur, the capital city of Malaysia, the government hereby embarked on supply of public housing to resolve such pending issue. This study aims to understand the periodic changes of public housing as a common basis for basic housing policies with analysis specific features of site plan, block layout, and unit plans. For this purposes, the filed survey during January, 2011 were proceeded. We hereby visited and surveyed a total of 40 apartment complexes for the 1970s~the 2000s (10 complexes respectively on a decade basis). Consequently, Malaysian public apartments prove to offer a very uniform pattern based upon standard plans. Their early plans aren't fairly distincted from those of other countries, but their layouts of plan become differentiated compared with other nations as they actively apply a ventilator called 'air well' in response to tropical climate amid the change of times. This study is expected to broaden our understanding of Malaysia's unique housing culture and lifestyle.

• Earthquakes and Structures
• /
• v.23 no.3
• /
• pp.283-295
• /
• 2022

Seismic design codes permit the use of Equivalent Static Analysis of buildings considering torsional eccentricity e with dynamic amplification factors on structural eccentricity and some accidental eccentricity. Estimation of e in buildings is not addressed in codes. This paper presents a simple approximate method to estimate e in RC Moment Frame and RC Structural Wall buildings, which required no detailed structural analysis. The method is validated by 3D analysis (using commercial structural analysis software) of a spectrum of building. Results show that dynamic amplification factor should be applied on torsional eccentricity when performing Response Spectrum Analysis also. Also, irregular or mixed modes of oscillation arise in torsionally unsymmetrical buildings owing to poor geometric distribution of mass and stiffness in plan, which is captured by the mass participation ratio. These irregular modes can be avoided in buildings of any plan geometry by limiting the two critical parameters (normalised torsional eccentricity e/B and Natural Period Ratio 𝜏 =T_𝜃/T, where B is building lateral dimension, T_𝜃 uncoupled torsional natural period and T uncoupled translational natural period). Suggestions are made for new building code provisions.