• 한국전산구조공학회논문집
• /
• 제29권4호
• /
• pp.355-362
• /
• 2016

대규모 지진에 대한 원전의 안전성을 확보하는 방안으로 기존 원전 구조물에 면진장치를 설치하는 방안이 도입되고 있다. 면진장치를 설치함으로써 상부구조와 지반의 거동을 격리시킬 수 있고, 구조물 자체의 고유주기가 길어지게 되는데, 이를 통해 지진하중에 대한 구조물의 응답을 감소시킬 수 있게 된다. 특히 원전구조물 설계 시 원전구조물 자체뿐만 아니라 원전 내부 기기에 대한 안전성 확보가 필수적이다. 이를 위해 특정 층에 위치한 기기의 설계를 위해 각 층의 최대 요구 응답을 나타내는 층응답스펙트럼이 일반적으로 사용된다. 본 논문에서는 원전 구조물의 지진해석을 통해 특정 층의 층응답스펙트럼을 평가하고, 면진 장치의 거동 특성중 하나인 2차 경화에 대한 영향 또한 평가하였다.

• Journal of Information Processing Systems
• /
• 제14권5호
• /
• pp.1272-1285
• /
• 2018

The paper presents a novel embedded multifunctional media sever (EMMS) for mobile devices to receive various media programs. Being different from other contemporary system research, the paper mainly studies how to design a reception solution for terrestrial digital television (DTV) on mobile devices and how to enable mobile devices can receive DTV program, enjoy video-on-demand (VOD), achieve video surveillance and relay Internet video program via local Wi-Fi simultaneously. In the system design, we integrate broadcasting-terrestrial DTV tuner, streaming media re-transmission system, VOD disk, video camera and access interface to the Internet into EMMS, which can either receive terrestrial DTV radio signals and demodulate out digital transport stream (TS), or can read streaming media bit-stream from VOD disk, surveillance camera or access interface to the Internet. The experimental results show the proposed system is stable and quality-efficient. Comparing with the other systems, the proposed system has the least packet loss rate and response time.

• Wind and Structures
• /
• 제2권3호
• /
• pp.201-251
• /
• 1999

Flexible structures may experience excessive levels of vibration under the action of wind, adversely affecting serviceability and occupant comfort. To ensure the functional performance of a structure, various design modifications are possible, ranging from alternative structural systems to the utilization of passive and active control devices. This paper presents an overview of state-of-the-art measures that reduce the structural response of buildings, including a summary of recent work in aerodynamic tailoring and a discussion of auxiliary damping devices for mitigating the wind-induced motion of structures. In addition, some discussion of the application of such devices to improve structural resistance to seismic events is also presented, concluding with detailed examples of the application of auxiliary damping devices in Australia, Canada, China, Japan, and the United States.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.375-380
• /
• 2004

Seismic Isolation and Shock/vibration Control Laboratory has performed the National Research Laboratory(NRL) project, 'Design and Application of Control Devices against Earthquake/Shock/Vibration'. In this project, the prototypes of the vibration control devices for structural control against earthquake and wind were developed and verified their performances. And also, the computer programs were developed for the seismic response analysis and the optimum design of the base-isolated structures with vibration control devices. This paper introduces the developed vibration control devices and computer programs.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.741-757
• /
• 2008

The research field of structural control has evolved from the development of passive devices since 1970s, through the intensive investigation on active systems in 1980s, to the recent studies of semi-active control systems in 1990s. Currently semi-active control is considered most promising in civil engineering applications. However, actual implementation of semi-active devices is still limited due mainly to their system maintenance and associated long-term reliability as a result of power requirement. In this paper, the concept of functionally upgraded passive devices is introduced to streamline some of the state-of-the-art researches and guide the development of new passive devices that can mimic the function of their corresponding semi-active control devices for various applications. The general characteristics of this special group of passive devices are discussed and representative examples are summarized. Their superior performances are illustrated with cyclic and shake table tests of two example devices: mass-variable tuned liquid damper and friction-pendulum bearing with a variable sliding surface curvature.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.21-26
• /
• 2002

Response time of actuator in a hydraulic system may be important and necessary to avoid failures and to improve the efficiency of operation. Flow restricting devices can result in a decrease in the peak pressure, but may change the response time. The response time has an important effect on both operator and operator perceived smoothness. The response time should correspond to how fast a system responds to a given disturbance at the system boundary, Occasionally the appropriate response time is not easily determined. This study is on the characteristics of response time in the hydraulic system.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1116-1120
• /
• 2014

With the shift of the energy paradigm from supply side management to demand side management, demand resource management and demand response plays an important role in the energy industry. As a consequency, a lot of researches have been done to provide a suitable demand response system. However, most of the demand response systems are based on the propriety products that cannot be modified. In this paper, we are proposing an automated demand response system using an EnerNOC provided open source code. We implemented the demand response server (VTN) and demand response client (VEN), and validated the OpenADR2.0 compliances using the open source code. We also used an Arduino microcontoller to demonstrate the communication schemes to control various devices.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1488-1495
• /
• 2002

The response time represents how fast a system responds to a given disturbance at the system boundary. Flow restricting devices for controlling transients can result in a decrease in the peakm pressure, but may change response time. Response lag in a hydraulic system leads to inefficient working cycle and operator discomfort. The experiments were conducted in order to get information on the parameters which exert appreciable influence on the response time. The experimental apparatu including a hydraulic actuator, orifice and a hydraulic pump was an idealization of a bucket hydraulic shifting system. Experimental results show that the response time depends on operating pressure and flow rate. The effects of orifice type and size on the response time are quantified.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.597-603
• /
• 2001

Control of pressure transients in a hydraulic system may be important and necessary to avoid failures and to improve the efficiency of operation. Flow restricting devices can result in a decrease in the peak pressure, but may change the response time. The response time has an important effect on both operator and operator perceived smoothness. The response time should correspond to how fast a system responds to a given disturbance at the system boundary. Occasionally the appropriate response time is not easily determined. This study is on the response time characteristics in the hydraulic system studied for the control of response time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.