• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.685-700
• /
• 2014

Purpose: The purpose of this paper is to develop a systematic weighting procedure based on process capability indices method applying weighted mean squared error minimization (WMSE) approach to dual response surface optimization. Methods: The proposed procedure consists of 5 steps. Step 1 is to prepare the alternative vectors. Step 2 is to rank the vectors based on process capability indices in a pairwise manner. Step 3 is to transform the pairwise rankings into the inequalities between the corresponding WMSE values. Step 4 is to obtain the weight value by calculating the inequalities. Or, step 5 is to obtain the weight value by minimizing the total violation amount, in case there is no weight value in step 4. Results: The typical 4 process capability indices, namely, $C_p$, $C_{pk}$, $C_{pm}$, $C_{pmk}$ are utilized for the proposed procedure. Conclusion: The proposed procedure can provide a weight value in WMSE based on the objective quality performance criteria, not on the decision maker's subjective judgments or experiences.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.65-72
• /
• 2004

With data of historical spill from vessels occurred in korean coastal waters, the author analyze the causes of spill and evaluate response technique adopted during spill. It is found that the majority of spill caused by operational failure, bad weather, violation of navigation rule and hull defect. As a result of evaluation of response measures, it is suggested that responsible agency establishes criteria for various response options and standards of tier response time and capability according to the size of spill.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.55-61
• /
• 2017

This study conducted a survey to evaluate the disaster response capability of coastal residents and analyzed the characteristics. For the sampling process, nonrandom sampling method was used. Sample size is 4,520 and sample error is ${\pm}1.5%p$ at 95% confidence level. As a result of the survey, 72% and 68% of the respondents said that they recognized the emergency contact network and listened to the disaster broadcast. On the other hand, 17% and 18% said that they organized the local voluntary disaster prevention teams and participated in disaster preparedness training. In addition, male's disaster response capability was higher than female's, and first aid techniques and participation in disaster preparedness training were higher in teens and twenties. By occupation, public official possess the highest response capability. By region, it was high in the East coast and low in the South coast. It is necessary that the authorities improve the national disaster preparedness training and publicity to enhance the coastal disaster response capability of coastal residents.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.5
• /
• pp.13-24
• /
• 2023

Due to recent climate change, the amount of rainfall during the summer season in South Korea has been decreasing, leading to an increase in areas affected by frequent droughts. Droughts have the characteristic of occurring over a wide area and being unpredictable in terms of their onset and end, necessitating proactive research to cope with them. In this study, we conducted an assessment of agricultural drought vulnerability in Taean-gun, Chungcheongnam-do, focusing on irrigation facilities and paddy fields. The assessment criteria were meteorological impact, drought occurrence status, supplementary water supply capacity, and drought response capability, with nine specific indicators selected. The drought response capability was analyzed by applying a scoring system as a key component of the agricultural drought vulnerability assessment, while the other indicators were quantified using an entropy weighting technique. The results of the assessment showed that Anmyeon-eup and Taean-eup were the safest areas, while Wonbuk-myeon, Nam-myeon, and Gonam-myeon were the most vulnerable. It is expected that the findings can be utilized to enhance understanding and proactive measures for coping with agricultural drought, and to determine the priority of drought response in different regions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2014

In this paper, SOA Current and Temperature Driver which consisted of LabVIEW programming part capable of current and temperature transient response pattern design, DAQ module for analog voltage in&out, and voltage to current converting chips has realized. The output current(possible to 3A) from the Driver to SOA was clearly constant without ripple and also showed no variance until 1mA unit for a long time operation. The temperature of TEC took several seconds to reach a set temperature, and were maintained stably within ${\pm}^0.1{\circ}C$ for several hours. The proposed Driver can replace the previous high cost SOA Drivers for wavelength swept lasers fully and provides the convenience of transient response design capability for current and temperature.

• Journal of the Society of Disaster Information
• /
• v.5 no.2
• /
• pp.50-73
• /
• 2009

This paper is about the establishment of "Initial Response System." Initial response system is most important and should be treated urgently among all preparations for chemical terrorism. The objects of Initial response system are to protect civilians and the first responder who are exposed directly to chemical terrorism. Therefore, this paper suggests two main issues about Initial response system. One is to prepare immediate and exact information service system which assures the safety and survival of exposed people. The other is to build Scene Response System integrated with Command-Control Procedure for early finished situation. Compared to United States, overcoming the Chemical Terrorism requires to improve the contents of two categories: Counter Citizen Response part and Initial Scene Response part. For Counter citizen response part' s sake, the web-sites of Response leader agencies for searching information about chemical terrorism should be modified specifically. These web-sites have to be re-organized in detail. The existing Information service system which has been vaguely informed as "CBRNE Accident" needs to be divided as "CBRNE Accident" and "WMD terrorism." Further, each of them should be specialized in "Chemical', "Biological", and "Radiological" categories. There is a need to rearrange current Emergency Instruction for civilians against chemical terrorism in feasible way. At the same time, it should be applied consistently to all organizations through agreement between experts and related-organizations. For Initial Scene Response part's sake, "Initial scene response procedure (SOP)" and "Operational conception" should be produced through Simulated Exercises and workshops of all organizations related with initial response. These organizations have to cooperate with Ministry of Environment which is the main leader Agency as the center. Next, there is a need to develop a technology and Scene Response Equipments, and to standardize the response equipments which consider the capability of First Responders for chemical terrorism. Especially, improving capability of equipments is required to overcome the vulnerability of Scene Response Equipments.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1556-1570
• /
• 2016

In the process of virtual inertia control (VIC), the frequency regulation capability of the directly-driven wind turbine with permanent-magnet synchronous generator (D-PMSG) on wind farm is related to its rotor kinetic energy and capacity margin. This paper proposes the method for assessing the D-PMSG frequency regulation capability and defining its coefficient according to the operating state of wind power generators. In addition, the calculating method of parameters in VIC is also discussed according to the principles of primary frequency regulation and inertia response of synchronous generators. Then, by introducing the capability coefficient into the proportion-differential virtual inertia control (PD-VIC) for power coordination, a coordinated virtual inertia control (C-VIC) strategy is developed, with the consideration of the difference in frequency regulation capability between wind power generators. The proposed control method can not only give full play to the frequency regulation capability of wind power generators, decrease the movements of the pitch angle control system but also bring some self-coordination capability to different wind power generators thus to avoid a secondary drop in system frequency. The simulations and experiments prove the proposed method to be effective and practicable.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.542-552
• /
• 2018

Operators face challenges to plan alternative countermeasures when no procedure exists to address the current plant state. A model-based approach is desired to aid operators in acquiring plant resources and deriving response plans. Multilevel flow modeling (MFM) is a functional modeling methodology that can represent intentional knowledge about systems, which is essential in response planning. This article investigates the capabilities of MFM to plan alternatives. It is concluded that MFM has a knowledge capability to represent alternative means that are designed for given ends and a reasoning capability to identify alternative functions that can causally influence the goal achievement. The second capability can be applied to find originally unassociated means to achieve a goal. This is vital in a situation where all designed means have failed. A technique of procedure synthesis can be used to express identified alternatives as a series of operations. A case of station blackout occurring at the boiling water reactor is described. An MFM model of a boiling water reactor is built according to the analysis of goals and functions. The accident situations are defined by the model, and several alternative countermeasures in terms of operating procedures are generated to achieve the goal of core cooling.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.359-366
• /
• 2013

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.