• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1725-1731
• /
• 2003

A high level CVT ratio control algorithm is proposed to improve the engine performance by considering the powertrain response lag. In this algorithm, the desired CVT speed ratio is modified from the vehicle velocity, which is estimated after the time delay due to the powertrain response lag. In addition, the acceleration map is constructed to estimate the vehicle acceleration from the throttle pedal position and the CVT ratio. Using the CVT ratio control algorithm and the acceleration map, vehicle performance simulations are performed to evaluate the engine performance and fuel economy. It is found that the fuel economy can be improved about 3.6% for FUDS by the ratio control algorithm for the target vehicle. In selecting the appropriate time delay, compromise between the fuel economy and the acceleration performance is required.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.17-26
• /
• 2023

This paper presents extended state feedback control based on impulse response for lane change of autonomous driving vehicle. The triple characteristic root of path tracking system and longitudinal velocity determine feedback gains. We suggest a resemblance of impulse response curve of the system and lane change trajectory of the vehicle. The root affects the duration of lane change and lateral acceleration. The effect of limited lateral acceleration and saturation of steering angle will be analyzed and discussed. Finally, simulation results will show the trajectory of lane change based on impulse response under limitation of lateral acceleration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.106-109
• /
• 1995

First, in this paper we propose a new dead best control system design technique by which we can specify a transient response before the settling time. Though the resultant system has the same system configuration as Reference[1], that is realized by adapting the performance index which includes the term of the square of difference between specified and pracitical responses. Next, we state a technique which gives the dead beat control system robustness and construct a robust dead beat control system. Simulations of the proposed dead beat control and robust dead beat control systems show expected results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.364-369
• /
• 1987

It has recently shown that a solenoid valve can be utilized in a hydraulic position-control system by discontinuous control methods. The objective of this study is to investigate the effects of solenoid valves on the response characteristics of a hydraulic position-control system by applying two kinds of discontinued control methods i.e., Simple On-Off (SOF) and Pusating On-Off(POF) controls. Three types of solenoid valves i.e. low-frequency, closed-center type (LF/C), high-frequency, closed-center type (HF/C), low-frequency, tandem-center type(LF/T) were used in this study. Effects of loading conditions and control parameters on the response characteristics were experimentally examined and compared each other. Pressure transients within the actuator were also studied.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.382-387
• /
• 2011

In this paper, a LBCC (Latter Bank Cooling Control) for the high strength steel is proposed to obtain the desirable temperature and the property of the material along the longitudinal direction of the steel on the ROT (Run-Out Table) process. A cooling valve is modeled to analyze the response of the ROT banks. The control concept is derived from a field data, a valve model considering the valve response and a TTT (Time-Temperature Transformation) diagram. The proposed control is verified from the simulation results under the various carbon quantities. It is shown through the field test of the hot strip mill that the deviation of the CT (Coiling Temperature) is considerably decreased by the proposed temperature control.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.516-522
• /
• 2004

In this paper we investigate the properties of a generalized impulse response Gramian. The recursive relationship satisfied by the family of Gramians is established. It is shown that the generalized impulse response Gramian contains information on the characteristic polynomial of a linear time-invariant continuous system. The results are applied to model reduction problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.209-211
• /
• 1986

The continuous time linear quadratic problem (LQP) has been applied to the control of a 8-tray distillation column using the code VASP. The weighting matrices for the state variables and control variables were adjusted iteratively. The simulation results of the optimal control with 2 inputs and 2 outputs showed that the LQP method is very satisfactory for a rapid response and feedback control, and any desired response could be obtained by adjusting the weighting matrices Q under = and R under =. The feedback gain matrix K under = was also determined.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.766-777
• /
• 2018

In this paper, a sliding mode and proportional plus integral (SM-PI) control combined with self-sustained phase shift modulation (SSPSM) for LLC resonant converters is presented. The proposed control scheme improves the transient response while preserving good steady-state performance. An averaged large signal model of an LLC converter with the ZVS modulation technique is developed for the SM control design. The sliding surface is obtained based on the input-output linearization concept. A system identification method is adopted to obtain the transform function of the LLC resonant converter, which is used to design the PI control. In order to reduce the inherent chattering problem in the steady state, the combined SM-PI control strategy is derived with fuzzy control, where the SM control is responsive during the transient state while the PI control prevails in the steady state. The combination of SSPSM and the SM-PI control provides ZVS operation, robustness and a fast transient response against step load variations. Simulation and experimental results validate the theoretical analysis and the attractive features of the proposed scheme.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.6
• /
• pp.480-488
• /
• 2003

The purpose of this research Is to derive the principal design parameters governing the dynamic characteristics of the high response flow control servo valve. For this purpose, a numerical modeling of the servo valve system and a parameter sensitivity analysis to a frequency response characteristics was peformed. As a result of these analysis, a basis for improvement of a dynamic characteristics of servo valve was arranged.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.1
• /
• pp.17-22
• /
• 2004

The goal of this paper is to improve the position control performance of pneumatic rotary actuator with variable brake using Magneto-Rheological Fluid. The air compressibility and the lack of damping of the pneumatic actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. In this study, a variable rotary brake comprising Magneto-Rheological Fluid is equipped to the joint of a pneumatic manipulator. Experiments of step response have proved that the transient response of the manipulator could be improved compared with that of the conventional control algorithm by using a phase plane switching control algorithm.