• 한국재료학회지
• /
• 제8권9호
• /
• pp.843-848
• /
• 1998

결량화 되고 고강도의재료를 요하는 자동차, 항공기, 선박, 각종 구조물 등 여러 분야에서 복합재료의 사용은 증가되어 왔고, 그에 따라 연구가 활발히 진행되고 있다. 본 연구에서는 Impulse Excitation Method을 통해 Transversely Isotropic한 재료의 공진 주파수를 측정함으로써 복합재료의 탄성계수를 구하였다. Timoshenko Beam Equation식에 나타나는 회전관성효과와 전단변형을 고려하였을 때와 고려하지 않았을 때 재료의 탄성계수에 변화가 어떻게 나타나는 가를 관찰하였다.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.903-909
• /
• 2004

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.136-141
• /
• 1996

A new suspension model of an optical pick-up actuator is developed. This model is very stable and easily manufactured owing to its specially designed geometry. In designing the suspension, the first two natural frequencies are kept lying in a certain range and sub-resonance frequencies are made as high as possible. The vibration and sensitivity analysis needed for optimal design is based on a simplified beam model of the bobbin-suspension structure. The investigation of the strain energy distribution in each vibration mode appears to be very useful.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.278-282
• /
• 2002

In this paper, a dual-band CPW antenna is designed with the aid of Genetic Algorithm and Finite-Difference Time-Domain method. The design goal is to minimize the magnitude of S$\sub$11/ in the frequency band between 1.8㎓ and 2.4㎓. The resonance frequencies are shifted by about 80MHz and 50MHz from the desired frequencies at 1.8㎓ and 2.4㎓ respectively. But the bandwidth agrees well with that of Simulation.

• ETRI Journal
• /
• 제26권5호
• /
• pp.481-485
• /
• 2004

We consider electromagnetic field radiation properties of a current filament placed at the origin of a cylindrical frequency selective surface (CFSS). The CFSS consists of free standing metal strips with two-dimensional periodicity. The analysis is based on a cylindrical Floquet mode wave expansion technique. We observed that near the half wavelength resonance frequencies, there exist some specific frequencies at which the surface becomes totally transparent.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.57-62
• /
• 1998

The resonance frequencies, shunt impedances and Q-values for the higher-order modes in our designed cavity are calculated by the computer codes URMEL and MAFIA. A new computer code is developed to calculate the complex tune shifts for the randomness of the higher-order mode frequencies due to the construction errors of a cavity. The results with the construction errors are compared to those fo without error cases for the dipole mode and quadrupole mode.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.75-82
• /
• 2014

In vibration analysis of ships, the principle aim is to determine the natural frequencies and excitation frequencies, and use this information to avoid resonances and vibration damage. The simplest method is to prevent resonance conditions, which is effective as long as the natural frequencies and excitation frequencies can be regarded as independent from environmental conditions. For ships that use electric propulsion systems, the sources of vibration are reduced compared with those caused by a diesel engine or other combustion-based propulsion systems. However, the frequency spectrum of these vibrations may be different; therefore, to understand the characteristics of the electric propulsion, we also should investigate how the ship responds to these vibrations. We focused on a 1,000-ton deadweight (DWT) ocean-research vessel using an electric propulsion system and analyzed the response to vibration.

• 소음진동
• /
• 제5권2호
• /
• pp.163-168
• /
• 1995

A criterion for the selection of spindle motor speeds in a hard disk drive (HDD) is investigated to guarantee stability and reduce nonrepeatable runout of a spining disk. Since the natural frequencies of the spining disk and the forced frequencies generated from the spindle motor depend on the rotating speed, careful consideration should be taken to avoid the resonance between the disk and motor. To do this, the natural frequencies of the spining disk are calculated and they are compared with the forced frequencies from the spindle motor.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.20-26
• /
• 2000

This paper deals with the modal analysis and the displacement of stator due to electromagnetic forces in Switched Reluctance Motor(SRM). A free-free model of the stator based on structural 3-dimensional Finite Element Method(FEM) is used for investigation the natural frequencies and the mode shapes of the stator. In addition, The displacement caused by magnetic force acting on stator pole is analyzed by the structural FEM coupled with the magnetic force. From these results, the resonance speed is obtained by the relation of the natural frequencies of the harmonic frequencies of magnetic force. And, the eccentricity with respect to rotor is predicted from the analysis result of the mechanical displacement of stator. The natural frequencies of stator are compared with experimental ones measured by modal testing.

• 산업기술연구
• /
• 제10권
• /
• pp.21-32
• /
• 1990

Car body resonance often generates severe vibrational and noise problems in vehicle compartment. In this study, vibrational characteristics of 2-D vehicle compartment model is investigated and structural modification is carried out by numerical simulation to shift natural frequencies and to reduce stresses in resonance. To this end, ring models of the compartment are manufactured and analysed by FEA. The results are verified to be in good agreement with those of experimental modal testing. And the results of this study offer efficient strucural modification technique for vibration reduction of real cars.