• Korea Journal of Hospital Management
• /
• v.5 no.1
• /
• pp.40-61
• /
• 2000

The purpose of this study is to promote the efficiency of the management of the controls organization in the university hospitals and general hospitals by evaluating the factors underlying organizational conflict. The subject population included 351 hospital workers randomly selected from two general hospitals of less than 200 beds and two university hospitals over 500 beds in Seoul area. Data were collected through a survey questionnaire. To define related factors for the level of conflict among departments in each hospitals multivariate regression analysis was conducted. Independent factors were characteristics of subjects, conflicting factors between the departments. The results are as follows: 1. Those in high job position group demonstrated significantly higher level of conflict between departments. Those working in the general hospitals, who were older and had long-term tenure at current working hospital had higher level of conflict between the departments. 2. Concerning the involvement of conflicting factors and the level of conflict in the employees' there was statistically significant positive correlation between reliability and job-related and intradepartmental level of conflict in university hospitals. There was a significant positive correlation between interdepartmental conflicting factors of mutual dependence, difference in goal/orientation and interdepartmental level of conflict. 3. In the university hospitals, among the interdepartmental factors, mutual dependence and difference in goal/orientation had statistically significant influence and showed a positive relationship with interdepartmental level of conflict. In the general hospitals, job position was a significant factor which showed that those in high position such as section chief or above, compared to those in general position had higher level of conflict. Among the interdepartmental characteristics, factors of mutual dependence and goal/orientation had statistically significant influence and showed a positive relationship with interdepartmental level of conflict. In the general hospitals setting efforts to reduce conflict in areas among workers with high position, old age, and long tenure and those in medical care department should be made and prudent management and planning for improved manpower and increased budget or efficient allocation and clear definition of job description are necessary to adequately assess. In the university hospitals setting efforts to reexaminitation of the organizational structure and efficiency conveyance of information and efforts to resolve conflict among young workers with lower level of education is need. This study has its own merit in comparing empirically the conflict among hospital workers in the university hospitals and general hospitals. Future study are needed with respect to the relationship between interdepartmental level of conflict and the effectiveness of the hospital organization for improved resolution of conflict in the organization and hospital management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.245-251
• /
• 2009

Recently, human life and the low birth rate and aging population has increased exponentially. Entry into an aged society in the present case and the different policy alternatives, and is a reality. Resolution of one of these older active community participation and production activities to foster a rich life, infants need to be able to build a ubiquitous environment can be damaging. Latest IT technology in the development of intelligent life on all human life even more convenient by combining the computer and try to build a productive environment is. You simply connect your computer to the elderly rather than older users to use, efficient and productive way to improve efforts to follow. Emerging as an alternative to the more efficient interfaces for ubiquitous computing, user interface design criteria, albeit a little uncomfortable by suggesting improvements of the elderly and their participation in production activities helped to improve the quality of life. Ubiquitous environment, as well as means to improve the living environment of older people live independent lives, as given us is that you can get the premise of this study was in progress.Thus, by analyzing the characteristics of the elderly for the elderly by offering more efficient way to interface design for a new era of ubiquitous pushing back the boundaries of the elderly have been instruments to achieve social vitality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.432-443
• /
• 2017

The primary goal of the MPEG-H 3D Audio standard is to provide immersive audio environments for high-resolution broadcasting services such as UHDTV. This standard incorporates a wide range of technologies such as encoding/decoding technology for multi-channel/object/scene-based signal, rendering technology for providing 3D audio in various playback environments, and post-processing technology. The reference software decoder of this standard is a structure combining several modules and can operate in various modes. Each module is composed of independent executable files and executed sequentially, real time decoding is impossible. In this paper, we make DLL library of the core decoder, format converter, object renderer, and binaural renderer of the standard and integrate them to enable frame-based decoding. In addition, by measuring the computation complexity of each mode of the MPEG-H 3D-Audio decoder, this paper also provides a reference for selecting the appropriate decoding mode for various hardware platforms. As a result of the computational complexity measurement, the low complexity profiles included in Korean broadcasting standard has a computation complexity of 2.8 times to 12.4 times that of the QMF synthesis operation in case of rendering as a channel signals, and it has a computation complexity of 4.1 times to 15.3 times of the QMF synthesis operation in case of rendering as a binaural signals.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.2
• /
• pp.153-163
• /
• 2008

Medical imaging modalities to image either anatomical structure or functional processes have developed along somewhat independent paths. Functional images with single photon emission computed tomography (SPECT) and positron emission tomography (PET) are playing an increasingly important role in the diagnosis and staging of malignant disease, image-guided therapy planning, and treatment monitoring. SPECT and PET complement the more conventional anatomic imaging modalities of computed tomography (CT) and magnetic resonance (MR) imaging. When the functional imaging modality was combined with the anatomic imaging modality, the multimodality can help both identify and localize functional abnormalities. Combining PET with a high-resolution anatomical imaging modality such as CT can resolve the localization issue as long as the images from the two modalities are accurately coregistered. Software-based registration techniques have difficulty accounting for differences in patient positioning and involuntary movement of internal organs, often necessitating labor-intensive nonlinear mapping that may not converge to a satisfactory result. These challenges have recently been addressed by the introduction of the combined PET/CT scanner and SPECT/CT scanner, a hardware-oriented approach to image fusion. Combined PET/CT and SPECT/CT devices are playing an increasingly important role in the diagnosis and staging of human disease. The paper will review the development of multi modality instrumentations for clinical use from conception to present-day technology and the application software.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.903-915
• /
• 2020

Long-term high-resolution hydro-meteorological data has been recognized as an essential element in establishing the water resources plan. The increasing demand for spatial precipitation in various areas such as climate, hydrology, geography, ecology, and environment is apparent. However, potential limitations of the existing area-weighted and numerical interpolation methods for interpolating precipitation in high altitude areas remains less explored. The proposed PRISM (Precipitation-Elevation Regressions on Independent Slopes Model) model can produce gridded precipitation that can adequately consider topographic characteristics (e.g., slope and altitude), which are not substantially included in the existing interpolation techniques. In this study, the PRISM model was optimized with SCEM-UA (Shuffled Complex Evolution Metropolis-University of Arizona) to produce daily gridded precipitation. As a result, the minimum impact radius was calculated 9.10 km and the maximum 34.99 km. The altitude of coastal weighted was 681.03 m, the minimum and maximum distances from coastal were 9.85 km and 38.05 km. The distance weighting factor was calculated to be about 0.87, confirming that the PRISM result was very sensitive to distance. The results showed that the proposed PRISM model could reproduce the observed statistical properties reasonably well.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.4 no.2
• /
• pp.101-110
• /
• 2011

To describe the background, mechanism, clinical results and complications of prolotheapy based on the literature review. Prolotherapy is a minimally invasive injection-based treatment of chronic musculoskeletal pain, including ligament and joint laxity. The mechanism of this injection-based technique is to initiate a local inflammatory response with resultant tissue healing. The used proliferants are classified by bio-mechanism to act in three different ways as osmotic, irritants, and chemotatics. The most commonly used proliferant is hyperosmolar (10~25%) dextrose to act by osmotic rupture of cells. High resolution ultrasound imaging of musculoskeletal structure provide a more accurate diagnosis. Also ultrasound-guided intervention provides a more high efficacy and low rate of complications. The most common complication is local pain at the injected site, that is self-limited and good responsive to anti-inflammatory agents. Other complications are rare. It is reported that prolotherapy appears safe when performed by an experienced clinician. Prolotherapy has grown in popularity and has received significant recent attention. However there are limited evidence-based data supporting the indication and efficacy of prolotherapy in the treatment of chronic musculoskeletal pain or soft tissue injuries. Future studies are necessary to determine whether prolotherapy can play an independent and definitive role in a treatment for chronic musculoskeletal pain.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.128-135
• /
• 1995

Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.193-199
• /
• 2018

In this research, 15 patients were diagnosed with 1.5T and 3.0T MRI instruments (Philips, Medical System, Achieva) to minize Ferromagnetic artifact and find the optimized Tesla. Based on the theory that the 3.0T, when compared to 1.5T, show relatively high signal-to-ratio(SNR), Scan time can be shortened or adjust the image resolution. However, when using the 3.0T MRI instruments, various artifact due to the magnetic field difference can degrade the diagnostic information. For the analysis condition, area of interest is set at the background of the T1, T2 sagittal image followed by evaluation of L3, L4, L5 SNR, length of 3 parts with Ferromagnetic artifact, and Histogram. The validity evaluation was performed by using the independent t test. As a result, for the SNR evaluation, mere difference in value was observed for L3 between 1.5T and 3.0T, while big differences were observed for both L4, and L5(p<0.05). Shorter length was observed for the 1.5T when observing 3 parts with Ferromagnetic artifact, thus we can conclude that 3.0T can provide more information on about peripheral tissue diagnostic information(p<0.05). Finally, 1.5T showed higher counts values for the Histogram evaluation(p<0.05). As a result, when we have compared the 1.5T and 3.0T with SNR, length of Ferromagnetic artifact, Histogram, we believe that using a Low Tesla for Spine MRI test can achieve the optimal image information for patients with disk operation like PLIF, etc. in the past.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.29-47
• /
• 2007

Owing to the rapid growth of using the Internet, not only click-and-mortar companies but also brick-and-mortar ones have been expanding their distribution channels into online, Moreover, since online channels are more attractive than offline ones in control and maintenance, switching customers into online ones is emerged as one of very important managerial issues in a view of reduction of cost as well as expansion of services. However, the switched customers should be faced by uncertainties which could not have been experienced in offline. Specifically, in online channels, buyers and sellers are separated temporally and spacially and there are always so many kinds of threat for security as well as not enough systems and conventions for them yet. Therefore, trust has been considered as one of the most critical mechanisms for resolution of such uncertainties in online transactions. However, it is not easy to build and maintain the relationships in online since most of them are virtual and indirect generally. Therefore, in order to switch offline customers into online ones, it is very important to make strategies based on identification of the relationship between online transaction and offline trust which has been built in offline business. Generally offline trust, which has been built independent of online, could not include trust for online-dependent activities such as payment security during or after transactions, while most of online trust include it. Therefore, a customer with high offline trust does not always perceive high security and assure safe transactions. Accordingly, while online trust, where technical capabilities for online security is one of main bases, includes control trust implicitly or explicitly, offline trust does not. However. in spite of such clear discrimination and independence between offline trust and perceived security, there can be the significant dependency between these two beliefs. The customers with high offline trust believe that the company would do some activities for online security for customers' safe transactions since it has been believed of doing well for customers' trust. Theoretically, users' perception of security is interpreted as a kind of control trus, which is trust for company's technical control capacities in order to resolve technical uncertainties in online. Therefore, the relationship between two beliefs can be considered as transference from offline trust to another type trust. that is, control trust. The objective of this study is to analyze the effect of offline trust on online transaction uses mediated by perceived security. For this purpose, we suggest a research model based on technology acceptance model (TAM). Reuse intention is adopted as a dependent variable and TAM is modified by adding perceived risk (PR) as well as two beliefs of using Internet banking, perceived usefulness (PU) and perceived ease of use (PEOU). Moreover, perceive security (PS) is adopted as an external variable for PR and PU, while offline trust (OT) is an antecedent of PS. For an empirical test, sampling from 108 visitors to the banks in Daegu, Korea, we analyze our model by partial least square (PLS) approach. In result, our model is shown to explain 51.4% of the variance in reuse intention and all hypothesis are supported statistically. A theoretical implication of this study is to identify a role of PS between offline trust and reuse intention of using online transaction services. According to our result, PS can be considered as a mediation variable for bridging between two different concepts: trust that explains social aspects of customers and companies, and TAM that explains customers' reuse intention.

• Journal of Sensor Science and Technology
• /
• v.9 no.5
• /
• pp.341-349
• /
• 2000

CsI(Br) single crystals doped with 1, 3, 5 or 10 mole% $Br^-$ ions, as an activator, were grown by Czochralski method. The lattice structure of grown CsI(Br) single crystal was bcc and its lattice constant was $4.568\;{\AA}$. The absorption edge of the CsI(Br) single crystals was observed at 243 nm. The spectral range of the luminescence excited by 243 nm of wavelength was $300{\sim}600\;nm$, and its peak emission appeared at 440 nm. The luminescence intensity was maximum when CsI(Br) was doped with 3 mole % $Br^-$ ions. The energy resolutions of the CsI(Br) scintillator doped with 3 mole % $Br^-$ ions were 15.0% for $^{137}Cs$(662 keV), 13.1% for $^{54}Mn$(835 keV), and 18.0% and 6.3% for $^{22}Na$(511 keV and 1275 keV), respectively. The decay curves had fast and slow components, and the fast component was about 41 ns independent on the concentration of the $Br^-$ ions. The time resolution of CsI(Br) scintillators decreased with increasing of the concentration of $Br^-$ ions.