• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.165-169
• /
• 2005

The fire damage of building wouid effect on the safety of structure. When the reinforced concrete structure is heated by high temperature due to the fire, the structural resisting-force will be decreased. In a way, it is a requirement to use high strength concrete for high rise building. Particularly, fire resistance properties of high-strength concrete is more important than normal strength concretes. The fire outbreak of a high strength concrete by sudden temperature rise is a main problem, and causes crack by thermal stress, loading to the deterioration of the durability. In this study, normal and high strength mortar were exposed to a high temperature environment. And than fundamental data for the character change of concrete heated highly were presented by measuring compressive strength of concrete with polypropylene and vinylon fiber, before and after heating. As the results, it is proven that high strength mortar with polypropylene and vinylon fiber for prevents deterioration of durability by fiber.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.7-12
• /
• 2015

CFRP composites are used as primary structural members in various industrial fields because their specific strength and specific stiffness are excellent in comparison to conventional metals. Their usage is expanding to high added-value industrial fields because they are more than 50% lighter than metals, and have excellent heat resistance and wear resistance. However, when CFRP composites suffer impact damage, destruction of fiber and interface delamination occur. This causes an unexpected deterioration of strength, and for this reason it is very difficult to ensure the reliability of the excellent mechanical properties. Therefore, for the destruction mechanism in bending with impact damage, this study investigated the reinforcement data regarding various external loads by identifying the consequential strength deterioration. Specimens were damaged by impact with a steel ball propelled by air pressure. Decrease in bending strength caused by the tension and compression of the impact side, and depending on the lamination direction of fiber and interface inside the specimen. From the bending test it was found that the bending strength reduced when the impact energy increased. Especially in the case of compression on the impact side, as tensile stress occurred at the damage starting point, causing rapid failure and a substantially reduced failure strength.

• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.193-197
• /
• 2010

현재 포장 공정에서 사용되고 있는 stretch wrapping 공정은 초기 포장기의 장치 구비 등의 가격문제와 사용 후 폐기되는 포장재의 처리문제가 심각하다. 이에 대해 미끄럼 방지 접착제(Slip-resistant adhesive)를 사용하여 물류를 고정하여 운반하는 방식은 간단한 접착제의 도입으로 폐기물 발생이 없고 공정이 간단하며 비용이 매우 낮은 장점을 지닌다. 본 연구에서는 다습한 환경에서 polyethylene 필름 상에 미끄럼 방지 접착제를 적용했을 경우 접착력이 저하되는 것을 peel test를 통해 확인하고 적절한 첨가제의 선정 및 도입을 통해 접착력을 개선하는 연구를 수행하였다. 이를 통해서 maltodextrin의 첨가 시에 내습성에 대한 개선으로 인해 미끄럼 방지 접착력의 저하가 억제되었으며 10 wt% 도입 시에 최적의 성능을 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.167-177
• /
• 2014

최근 수질오염의 악화로 고도정수처리시설에 대한 수요가 커지고 있으며, 오존처리와 같은 밀폐형 고도정수처리시설의 설치가 늘고 있는 실정이다. 그러나 오존의 강력한 산화작용으로 인해 콘크리트 구조물의 침식이 우려됨에 따라 오존에 대응 가능한 에폭시 방수방식재가 콘크리트 표층부 보호 코팅재로 적용되고 있다. 그러나 이러한 에폭시가 오존에 대한 성능수준 및 장기적 내구성을 명확히 측정할 방법과 기준이 없어 정확한 품질관리가 이루어지지 않고 있는 실정이며, 이로 인해 수처리용 콘크리트 구조물의 장기내구성 확보에 대한 우려가 제기되고 있다. 이 연구에서는 AFM과 나노인덴테이션 기법이 기존에 사용하던 평가방법인 육안관찰, 중량변화, 표면관찰, 색차분석 등의 간접적 평가방법과 함께 에폭시 방수방식재 평가방법으로써의 적합한지를 판단하고자 하였으며, 이를 위해 오존용으로 개발된 6종의 다른 성분으로 구성된 에폭시계 방수방식재를 대상으로 열화특성을 분석하였다. 연구결과 AFM과 나노인덴테이션을 활용할 경우 기존 평가방법보다 직접적이고 정량적인 평가가 가능함을 확인하였으며, 일부 에폭시 코팅재료의 경우 오존에 대한 성능 한계치 (임계치)를 명확히 확인할 수 있었다.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.23-30
• /
• 2011

이 연구는 콘크리트의 내구성 저하요인인 해수침식 및 동결융해 반복작용을 받은 콘크리트의 성능저하 정도를 실험적으로 고찰하기 위하여 포틀랜드 및 혼합시멘트를 사용하여 콘크리트 공시체를 제조한 후 상대동탄성계수, 압축강도 변화 및 기기분석을 통하여 성능저하 원인을 구명하였다. 동결융해 520싸이클까지의 결과 보통포틀랜드 및 저열포틀랜드시멘트는 75% 이상의 상대동탄성계수와 압축강도가 내황산염포틀랜드시멘트 약 44%의 값을 나타내어 상대적으로 낮은 저항성을 나타내었으며, 고로슬래그미분말을 50% 대체하여 사용한 콘크리트가 혼합시멘트계 콘크리트 중 가장 우수한 동결융해 저항성을 나타내었다. 혼합시멘트계 콘크리트의 해수침식 유 무에 따라 비교한 결과, 고로슬래그미분말 콘크리트의 잠재수경성 촉진으로 동결융해 저항성이 우수하였으나, 실리카퓸을 혼합한 콘크리트는 해수침식에 의한 성능저하가 발생하여 동결융해 저항성이 낮아지는 경향을 나타내었고, 해수침식 및 동결융해 작용을 받은 보통포틀랜드 콘크리트는 동결융해 작용에 의한 쏘마싸이트 피크와 해수침식에 의한 석고 및 프리델 염분 피크가 주로 검출되고, 고로슬래그미분말을 혼합한 콘크리트는 해수침식의 유 무에 상관없이 좋은 결과를 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.1-9
• /
• 2006

The structural wooden members of the ancient building are deteriorated by fungi and termite over time. The deteriorate of the members causes the decrease of the specific gravity and the strength of it, so the stability of the building is threatened. Therefore, in this study, the evaluation of the specific gravity, which is correlated with the strength of the wood, was conducted in the post member using Nondestructive Evaluation (NDE) - Drilling Resistance Test (DRT). For the purpose of it, the specific gravity and drilling resistance of small specimens was measured to obtain the correlation between the specific gravity and the drilling resistance. And then, the drilling resistance test of the post members, which were expected to have the deteriorated parts, was performed. Consequently, the correlation between the specific gravity and the drilling resistance was very high ($R^2=0.89$) and the distributions of the specific gravity were evaluated for the each member. Also, the results were verified by the visual inspection of the cross section of it. Especially, the various variations of the wood member such as the deteriorated parts with termite or fungi and the crack could be detected exactly but the knot couldn't because the drill could pass by or could not penetrate the knot.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.715-722
• /
• 2019

콘크리트 구조물은 외부로부터 콘크리트 내부로 침투 및 확산하는 유해 이온(CO₃^2-, Cl^-, SO₄^2- 등)에 의하여 철근의 부식 및 콘크리트 열화가 발생하여 내구성이 저하된다. 따라서 콘크리트의 열화를 방지 또는 지연시키기 위하여 콘크리트 표면 보호용 마감 모르타르의 사용은 매우 중요하다고 할 수 있다. 본 연구에서는 실리카 졸과 칼슘 이온으로 개질한 천연 라텍스 성분을 열화 콘크리트의 보수용 모르타르 또는 콘크리트 표면 보호용 마감 모르타르에 사용할 수 있는 시멘트 모르타르에 사용함으로써 콘크리트의 열화 방지 또는 열화 지연의 가능성에 대해 검토하였다. 연구 결과, 개질 라텍스 성분 중에 함유된 칼슘 이온과 실리카 졸의 성분에 의해 미세한 칼슘 실리케이트 수화물이 시멘트 재료의 공극에 생성되어 시멘트 모르타르의 공극 분포를 감소시켜 유해 이온(CO₃^2-, Cl^-, SO₄^2- 등)의 침투 및 확산을 저감 시키고, 라텍스 성분이 시멘트 경화체의 공극 내부에 존재함으로 내알칼리성 및 중성화 저항성이 향상됨을 확인할 수 있었다.

• Journal of Crop Science and Biotechnology
• /
• 제11권1호
• /
• pp.13-16
• /
• 2008

Pepper fruit anthracnose caused by Colletotrichum species is an economically important disease that causes serious yield loss and quality deterioration in many Asian countries including South Korea and Taiwan. Recently, Capsicum baccatum PI594137 was found to exhibit broad-spectrum resistance to Colletotrichum acutatum. The inheritance of anthracnose resistance to C. acutatum was analyzed in an intraspecific population derived from a cross between C. baccatum Golden-aji and PI594137. Detached mature green fruits were inoculated using the microinjection method. The disease response was evaluated as the disease incidence and the overall lesion diameter at 7 days after inoculation(DAI). The segregation ratios of resistance and susceptibility to C. acutatum in the $F_2$ and $BC_s$ populations significantly fit a 3:1 Mendelian model. This result indicates that the resistance of PI594137 to C. acutatum is controlled by a single dominant gene.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.123-133
• /
• 2018

The purpose of this paper is to propose an experimental method to evaluate the resistance of abrasion about 24 MPa, 27 MPa, and 30 MPa compressive strength. These strength are used in the design and construction of concrete hydraulic structures in Korea. The mixing ratios of the ready mixed concrete strengths were investigated countrywide and set the representative mixture proportion ratios of the nine mixed types of OPC, FA and BFS. After making and curing the test specimens, the underwater abrasion test was performed. ASTM C 1138 International Standard was used to fabricate the test equipment, and the surface abrasion resistance of the specimen was tested using the test equipment. In the case of OPC, the 30% abrasion resistance improvement effect was observed at 72 hours as the water-binder ratio decreased. That was reason the coated cement bond strength of the specimen was strong. In the case of BFS and FA, it was improved by 9.9% and 3.8%, respectively, at 72 hours as the water-binder ratio decreased. It was due to the characteristics of the latent hydraulic and pozzolanic reactions. Generally, the relative abrasion resistance of concrete can be evaluated at 24 hours. However, in case of low strength (under 24 MPa), the surface mortar layer wears much faster at the first 12 hours, so it can be considered to evaluate the relative abrasion loss rate at this point.

• 중환자간호학회지
• /
• 제9권2호
• /
• pp.48-60
• /
• 2016

Purpose: The purpose of this study was to identify the attributes of the concept, of psychological resistance to antihypertensive medication. Methods: The study was conducted in accordance with Walker and Avant's conceptual analysis process. We reviewed 47 related studies selected from 4 international and Korean databases including Medline, CINAHL, NDSL, and RISS to perform the analytical processes from January 1980 to September 2015. Results: The attributes of psychological resistance to antihypertensive medication include 1) reservation, 2) opposition, 3) denial, 4) refusal, and 5) seeking alternative therapy. The antecedents of the concept can be classified into patient factors such as reactance trait and knowledge deficit, provider factors, interpersonal factors, and environmental factors. The consequences of psychological resistance to antihypertensive medication are non-compliance, deterioration of the disease, developing complications, increased anxiety, and changes in life. Conclusions: The concept of psycho logical resistance to antihypertensive medication can provide guidance for the development of an intervention program that promotes the compliance to medication regimen of hypertensive patients. Further research needs to be done to develop a measurement tool for psychological resistance to antihypertensive medication.