• Composites Research
• /
• v.31 no.4
• /
• pp.151-155
• /
• 2018

Mechanical joint and adhesive joint are two typical joining methods for structures. The adhesive joints distribute the load over a larger area than mechanical joints and have excellent fatigue properties. However, the strength of adhesive joint greatly depends on the environmental conditions and the skill of the operator. Therefore, there is a need for techniques to evaluate the quality of the adhesive joints. The electric resistance method is a very promising technique for detecting defects by measuring the electrical resistance of an adhesive joint in which CNTs are dispersed in an adhesive. In this study, Aluminium-Aluminium adhesive single lap joint specimens were fabricated by using the adhesive dispersing CNTs using a sonicator and a 3-roll mill, and the static strengths and defect detection capabilities of the joints using the electrical resistance method were evaluated according to the CNTs content.

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.24-34
• /
• 2001

Methicillin Resistant Staphylococcus aureus (MRSA) was obtained from the clinical specimens at Pusan national university Hospital, Pusan, Korea. The sensitivities against various antibiotics were examined by using disc diffusion test and associated genes such as mecA, mecR1, mecI and femA were detected by polymerase chain reaction. Among Seventy-nine strains of MRSA, 38 strains(48.1%)were sensitive to streptomycin and 32 strains(40.5%) to cefoperazone, while one strain(1.3%) were resistant to vancomycin. In considering the result of this study, 7 strains showed resistance to 9 kinds of different antibiotics, 12 strains were to 8 kinds, 24 strains were to 7,25 strains were to 6, 9 strains were to 5, and 2 strains were to 4 antibiotics. Among 79 strains of MRSA, 67 strains were coagulase positive and 12 were coagulase negative. In the detection of MRSA associated genes by PCR method, mecA, mecR1, mecI, and femA genes were detected in 30 strains(44.8%), 28 strains(41.8%), 23 strains(34.3%) and 15 strains(22.4%), respectively. MecA type that is without femA were found in 21 strains(31.3%), femA type that is without regulator genes were shown in 4 strains(6.0%), while mecA-mecR1-mecI type with regulator genes were shown more to be 17 strains(25.4%). There was little statistical significance between multidrug resistance and MRSA associated genes. Considering these result, it is necessary to include moecular biological studies of related genes to the study drug resistance.

• Composites Research
• /
• v.28 no.6
• /
• pp.348-355
• /
• 2015

NDT (Non Destructive Test) of the adhesive joints is very important because their strengths have greatly affected by the worker's skill and environmental condition. Recently, the electric impedance method in which 1-2 wt% CNT was dispersed in the adhesive and the electric resistance of the adhesive joint was measured was suggested for the defect detection of the adhesive joint. The uniform dispersion of CNT in the electric impedance method is very important to make a constant electric resistance of the adhesive joint and the accuracy of defect detection depends on the uniform dispersion. In this paper, the adhesive joints in which CNT was dispersed in the adhesive by the four dispersion methods were made and their electric resistance were measured. The pre-process and evaporation process of CNT using the ultrasonic method and agitation method was used and the effective dispersion method was suggested. Also, the criteria to evaluate the dispersivity was proposed.

• Journal of fish pathology
• /
• v.35 no.1
• /
• pp.47-56
• /
• 2022

Lincomycin as one of the lincosamides antibiotics have been mainly used in human and livestock fields, but have not been used in aquaculture. In this study, the distribution of minimum inhibitory concentration (MIC) values against lincomycin and the detection of the macrolide-lincosamide-streptogramin (MLS) resistance gene were confirmed in bacterial pathogens isolated from cultured olive flounder (Paralichthys olivaceus). Of the 107 strains isolated from Jeju, 36 strains of Gram-positive bacteria and 71 strains of Gram-negative bacteria were identified. Most of Streptococcus spp. was found to have a MIC value of less than or equal to 0.5 ㎍/mL, and Edwardsiella piscicida was found to have a MIC value higher than 1,024 ㎍/mL. V. harveyi and V. alginolyticus mostly showed MIC values of 256 ㎍/mL, but V. scophthalmi displayed values of 8~64 ㎍/mL. In the detection of MLS resistance gene, erm(B) was detected in 9 strains of Streptococcus spp., and erm(A) was confirmed in one strain.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.1
• /
• pp.180-189
• /
• 2016

The widespread occurrence of drug-resistant Mycobacterium tuberculosis places importance on the detection of TB (tuberculosis) drug susceptibility. Conventional drug susceptibility testing (DST) is a lengthy process. We developed a rapid enzymatic color-reaction-based biochip assay. The process included asymmetric multiplex PCR/templex PCR, biochip hybridization, and an enzymatic color reaction, with specific software for data operating. Templex PCR (tem-PCR) was applied to avoid interference between different primers in conventional multiplex-PCR. We applied this assay to 276 clinical specimens (including 27 sputum, 4 alveolar lavage fluid, 2 pleural effusion, and 243 culture isolate specimens; 40 of the 276 were non-tuberculosis mycobacteria specimens and 236 were M. tuberculosis specimens). The testing process took 4.5 h. A sensitivity of 50 copies per PCR was achieved, while the sensitivity was 500 copies per PCR when tem-PCR was used. Allele sequences could be detected in mixed samples at a proportion of 10%. Detection results showed a concordance rate of 97.46% (230/236) in rifampicin resistance detection (sensitivity 95.40%, specificity 98.66%) and 96.19% (227/236) in isoniazid (sensitivity 93.59%, specificity 97.47%) detection with those of DST assay. Concordance rates of testing results for sputum, alveolar lavage fluid, and pleural effusion specimens were 100%. The assay provides a potential choice for TB diagnosis and treatment.

• Journal of Korea Multimedia Society
• /
• v.21 no.1
• /
• pp.34-44
• /
• 2018

An early detection of intravenous (IV) infiltration is essential to minimize the injuries during infusion therapy, which is one of the most important tasks for nurses in nursing settings. We report that bioelectrical impedance analysis is useful in the early detection of infiltration at puncture sites. When infiltration was intentionally induced in the vein of a pig's posterior ear, impedance parameters (R, $X_C$, $C_m$) showed significant differences before and after infiltration. In particular, the relative resistance ($R/R_{BI}$) decreased significantly at infiltration and then slowly decreased. This indicates that the vein in pig's ear is thin and the amount of surrounding subcutaneous tissue, and hence the infiltrated solution accumulates slowly after infiltration. However, when infiltration was induced in the vein of human's forearm, the relative resistance at 20 kHz decreased gradually over time. In the $R-X_C$ graph, the positions in the case of infiltration induced in the pig' ear shifted rapidly before and after infiltration, whereas the positions in the case of infiltration induced in the human's forearm moved gradually during infiltration. Our findings suggest that the impedance parameters (R, $R/R_{BI}$, $X_C$, R vs. $X_C$, and $C_m$) are effective indicators to detect the infiltration early in a non-invasive and quantitative manners.

• The Plant Pathology Journal
• /
• v.23 no.4
• /
• pp.260-265
• /
• 2007

Testing a large number of samples from field monitoring and routine indexing is cumbersome and the available virus detection tools were labor intensive and expensive. To circumvent these problems we established tissue blot immunoassay (TBIA) method an alternative detection tool to detect Barley mild mosaic virus (BaMMV) and Barley yellow mosaic virus (BaYMV) infection in the field and greenhouse inoculated plants for monitoring and routine indexing applications, respectively. Initially, leaf and stem were tested to determine suitable plant tissue for direct blotting on nitrocellulose membrane. The dilutions of antibodies were optimized for more efficient and economical purposes. Results showed that stem tissue was more suitable for direct blotting for it had no background that interferes in the reaction. Therefore, this technique was referred as direct stem blot immunoassay or DSBIA, in this study. Re-used diluted (1:1000) antiserum and conjugate up to 3 times with the addition of half strength amount of concentrated antibodies was more effective in detecting the virus. The virus blotted on the nitrocellulose membrane from stem tissues kept at room temperature for 3 days were still detectable. The efficiency of DSBIA and RT-PCR in detecting BaMMV and BaYMV were relatively comparable. Results further proved that DSBIA is a rapid, reliable and economical detection method suitable for monitoring BaMMV and BaYMV infection in the field and practical method in indexing large scale of barley materials for virus resistance screening.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.193-199
• /
• 2002

Structral crack of RC structure generally occurs when the tension stress by applied load is larger than tension resistance of concrete, and it means deterioration of structure and the decrease of load resistance. Because structural crack of structure can occur critical damage to structure occasionally, the research on crack detection algorithm of RC structure is needed for assurance of structural safety and effective maintenance of structure. In this paper, we executed the laboratory test on measuring strain of RC beam's tension and compression zone, using strain gauge which is widely used on strain measurement of civil structure. By using measured strain, we analyzed strain change, elastic modulus change, and neutral axis change to detect crack of RC beam. As a result, we proposed the simple and effective crack detection algorithm using trends of neutral axis position change.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.255-260
• /
• 2021

We studied electrochemical sensors using printed carbon nanotube (CNT) film on a polyethylene terephthalate (PET) substrate. Multiwalled CNT films were printed on a PET substrate to study its feasibility as hazardous and noxious substances (HNS) detection sensor. The printed CNT film (PCF) with a 50 ㎛ thickness exhibited a specific resistance of 230 ohm. To determine the optimum sensor structure, a resistance-type PCF sensor (R-type PCF sensor) and a conductive-type PCF sensor (C-type PCF sensor) were fabricated and compared using diluted NH₃ droplets with various concentrations. The response magnitude, response time, sensitivity, linearity, and limit of detection (LOD) were compared, and it was concluded that the C-type PCF sensor exhibited superior performance. By applying a C-Type PCF sensor, we confirmed the detection performance of 12 types of floating HNS and the response of the sensor with selectivity according to the degree of polarity.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.100-107
• /
• 1999

Due to the high temperature and pressure, the materials of pipeline in power plant are degraded by creep damage. So far, many conventional measurement techniques such as replica method, electric resistance method, adn hardness test method for creep damage have been used. Among them, the replica method has mainly been used for the inspection of components. But this technique is restricted to the applications at the surface of the objects and cannot be used to material inside. In this paper, the measuring methods of evaluation by using ultrasonic attenuation and electric resistance for the creep detection of creep damage in the form of cavities on grain boundaries or intergranular microcracks were carried out. Absolute measuring method of quantitave ultrasonic attenuation technique for 1Cr0.5Mo material degradation was analyzed for determining the creep degradation steps using life prediction formula. As a result of measurement for creep specimens, we founded that the coefficient of utrasonic attenuation was increased as the increase of creep life fracton(${phi}c$) and the decreasing rate of wlwctric resistance was also increased.