• Atmosphere
• /
• v.15 no.2
• /
• pp.75-90
• /
• 2005

This study examines the impacts of land cover changes on the East Asia summer monsoon with the National Center for Atmospheric Research Regional Climate Model (NCAR RegCM2), coupled with Biosphere Atmosphere Transfer Scheme (BATS). To assess the goals, two types of land cover maps were used in the simulation of summer climate. One type was NCAR land cover map (CTL) and the other was current land cover map derived from satellite data (land cover: LCV). Warm and cold surface temperature biases of $1-3^{\circ}C$ occurred over central China and Mongolia in CTL. The model produced excessive precipitation over northern land area but less over southern ocean of the model domain. Changes of biophysical parameters, such as albedo, minimum stomatal resistance and roughness length, due to the land cover changes resulted in the alteration of land-atmosphere interactions. Latent heat flux and wind speed in LCV increased noticeably over central China where deciduous broad leaf trees have been replaced by mixed farm and irrigated crop. As a result, the systematic warm biases over central China were greatly reduced in LCV. Strong cooling of central China decreased pressure gradient between East Asian continent and Pacific Ocean. The decreased pressure gradient suppressed the northward transport of moisture from south China and South China Sea. These changes reduced not only the excessive precipitation over north China and Mongolia but also less precipitation over south China. However, the land cover changes increased the precipitation over the Korean Peninsula and the Japan Islands, especially in July and August.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.91-109
• /
• 1997

This study was conducted to find a more rational way of inheriting and developing tra-ditional Korean HanBok children wear by means of looking at the color and shapes of traditional Korean HanBok and also to find a way to apply this to today's children HanBok wear. The process taken was first to study re-lated literature and its theories and to research museums to find what few traditional HanBok there are and then to compare these findings with new books and personal pieces kept by individuals. We also compared with HanBok children wear now sold at markets. The results of these findings show the fol-lowing conclusions and recommendations: We have found that modern children HanBok utilized the same yellow blouse and red skirt combination as before. These nearly in all cases represented the colors for girls. To most koreans these combination colors are a representation of traditional children wear nat-urally accepted by most koreans without any resistance. Also a definite relation with tra-ditional and modern children wear in the sense of color and shape wear hard to substantiate but we could find harmony between the two. In other words a mixture of modern shapes and traditional colors could be found or vice versa. This is an important factor to be con-sidered when trying to inherit traditional hanBok cuture. Modern times has seen great change in lifestyle feelings and social environ-ment,. In order to create harmony between tra-dition and present day customs a certain mix-ture is required. Therefore we need to maximize traditional flavor and design with present day design emotions. Another issue is that right now children hanBok is only being utilized on a restricted scale. It is a shame that in today's children HanBok that added to the skirt pants and overall wear that the head wear purse and other accessories are not being used. There-fore the HanBok culture especially for the correct succession of children hanBok must refrain from such restricted use of accessories and work to advertise the widespread use of proper Hanbok wear thereby upholding the rightful use of HanBok. As I have mentioned in my other studies it is ones momory of early HanBok wear which greatly affects a grown-up so we should wear hanBok in the right way from an early age and become accustome to its shapes and colors thereby become friendly with traditional HanBok wear. This I believe will lead to overcoming prejudice and disapproval of hanBok and to a more affirm-ative view towards our cultural heritage, Looking from a design point of view inter-national design of a nation's traditional wear can only come from a correct understanding of ones traditions this then becoming a foun-dation for creative design. Seen from these aspects a re-cretion through the meaningful activities of studying traditional shapes and colors of hanBok is the beat way to forming a true HanBok tradition.

• Tribology and Lubricants
• /
• v.34 no.5
• /
• pp.197-207
• /
• 2018

Thermal deterioration of fuel due to long-term storage influences engine performance and causes malfunctions. Fuel stability is usually evaluated via heat resistance and thermal stability during a brief heat shock at high temperature; storage stability in this scenario means that there is very little change in the quality of the fuel during long-term storage. In addition, rubber-based products such as oil seals, O-rings, and rubber hoses can influence the quality of the fuel. When these rubber products are in contact with fuel, they can swell, mechanically weaken, and occasionally crack, thus leaking low molar weight rubber and additives including plasticizer and antioxidant into the fuel to degrade its properties and shorten its useful lifetime. This study determines the thermal stabilities of three kinds of synthetic fuels by evaluating their low temperature kinematic viscosities, chemical composition changes via GC analyses, gross heat of combustion, and color changes. We evaluate the compression set of O-rings by immersing one NBR and two FKM rubber O-rings in the three synthetic fuel samples in airtight containers at variable storage temperatures for six months; from this, we estimate the lifetimes of the O-rings using the Power law model. There were very little changes in the chemical compositions and gross heat of combustion after six months of the experiment. The lifetimes are thus dependent on the materials of the rubber products, and in particular, the FKM O-ring was calculated to have a theoretical lifetime of 200 to 5,700 years. These results indicate that the synthetic fuels maintain their physical properties even after long-term storage at high temperatures, and the FKM O-ring is suitable for long-term sealing of these fuels.

• Journal of Chest Surgery
• /
• v.46 no.1
• /
• pp.1-13
• /
• 2013

Background: Glutaraldehyde (GA) is a widely used cross-linking agent for improving mechanical properties and resistance to enzymatic degradation of collagenous tissue, but it has several drawbacks such as calcification and cytotoxicity. The aim of this study was to find the alternative effective cross-linking methods to GA. Materials and Methods: Bovine pericardium was processed with GA with ethanol+octanol and glycine detoxification, and polyethylene glycol (PG) space filler, dimethyl 3,3'-dithiobispropionimidate (DTBP), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) treatment, and the physical fixation of ultraviolet irradiation were done. The biologic material properties of variously treated pericardial tissues were assessed by biochemical, mechanical and histological tests. Treated pericardial tissues were also implanted subcutaneously or intramuscularly into the rabbit for 10 weeks to assess the xenoreactive antibody response of immunoglobulin G and M, their anti-calcification effect. Results: The biochemical and mechanical properties of EDC fixed pericardial tissues were comparable to the GA fixed tissue. The cytotoxicity was lowest in space filler treated GA fixed group. In rabbit subcutaneous or intramuscular implantation models, decellularization, space filler, EDC treatment group showed significantly lower calcium content than GA only and DTBP treatment group (p<0.05, analysis of variance). The titer of anti $Gal{\alpha}1-3Gal{\beta}1$-4GlcNAc-R antibodies did not change in the postimplantation serial enzyme-linked immunosorbent assay. Hematoxylin and eosin and von Kossa staining showed that decellularization, space filler, EDC, and ultraviolet treatment had less inflammatory cell infiltration and calcium deposits. Conclusion: The decellularization process, PG filler, and EDC treatments are good alternative cross-linking methods compared to GA only fixation and primary amine of DTBP treatment for cardiovascular xenograft preservation in terms of the collagen cross-linking stability and in vivo anti-calcification effects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.410-410
• /
• 2013

Next-generation nonvolatile memory (NVM) has attracted increasing attention about emerging NVMs such as ferroelectric random access memory, phase-change random access memory, magnetic random access memory and resistance random access memory (RRAM). Previous studies have demonstrated that RRAM is promising because of its excellent properties, including simple structure, high speed and high density integration. Many research groups have reported a lot of metal oxides as resistive materials like TiO2, NiO, SrTiO3 and ZnO [1]. Among them, the ZnO-based film is one of the most promising materials for RRAM because of its good switching characteristics, reliability and high transparency [2]. However, in many studies about ZnO-based RRAMs, there was a problem to get lower current level for reducing the operating power dissipation and improving the device reliability such an endurance and an retention time of memory devices. Thus in this paper, we investigated that highly reproducible bipolar resistive switching characteristics of W doped ZnO RRAM device and it showed low resistive switching current level and large ON/OFF ratio. This may be caused by the interdiffusion of the W atoms in the ZnO film, whch serves as dopants, and leakage current would rise resulting in the lowering of current level [3]. In this work, a ZnO film and W doped ZnO film were fabricated on a Si substrate using RF magnetron sputtering from ZnO and W targets at room temperature with Ar gas ambient, and compared their current levels. Compared with the conventional ZnO-based RRAM, the W doped ZnO ReRAM device shows the reduction of reset current from ~$10^{-6}$ A to ~$10^{-9}$ A and large ON/OFF ratio of ~$10^3$ along with self-rectifying characteristic as shown in Fig. 1. In addition, we observed good endurance of $10^3$ times and retention time of $10^4$ s in the W doped ZnO ReRAM device. With this advantageous characteristics, W doped ZnO thin film device is a promising candidates for CMOS compatible and high-density RRAM devices.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.498-509
• /
• 2008

Reliability analyses of Level I, II and III for bearing capacity, overturning and sliding of quaywall are carried out to investigate their safety levels depending upon its failure modes, and sensitivity analyses of each design variable are performed to find their effects on safety levels of quaywall. Reliability indices was 1.416 for both level II and III for case study I, and with 2.201 and 1.880, respectively, for the case study II at the critical loading conditions. Thus we were able to know that Level II (FORM) approach is good enough to use in practical design. Generally, it was found that probabilities of failure of quaywall were higher for sliding and bearing capacity failure modes and lower for overturning failure mode. From sensitivity analyses, the most influential design variables to reliability index of quaywall were coefficient of friction, residual water pressure and resistance moment for the sliding, overturning and bearing capacity failure modes, respectively. Especially, the sensitivity of reliability index due to inertial force and dynamic water pressures, which include a large COV when earthquake occurs, did not change greatly.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.268-275
• /
• 2008

In order to develop the multi-functional rhizobacteria that can exert positive effect on the growth of plants growing in the coastal sand dune located along East Coast of Korea, rhizospheral bacteria of 11 different plants from this area were isolated 1,330 rhizobacteria. Among these, 23 strains were able to produce auxin and had spectrum of antagonism toward various phytopathogenic microbes. To know the mechanism of this antifungal activity, these 23 strains were subjected to further analyses; 19 strains of these produced siderophore as determined by color reaction on CAS-blue plate, 4 strains produced antifungal cellulase as judged by color change on CMC-Congo red plate, 17 strains were able to utilized insoluble phosphate salts, also determined by clear zone formation on PVK medium. Identification of the strain was assigned to all 23 strains by l6s rDNA sequence analysed, and all were identified to be in the genus of Bacillus and Pseudomonas. One strain of these, denoted Pseudomonas fluorescens IB4-14, showed ACC deaminase activity which is known to be involved in the resistance of environmental stress such as salt and drought. Also, P. fluorescens IB4-l4 showed the germination stimulation and roots growth promoting activity on the in vivo assay of Lysimachia mauritiana Lam. (spoonleaf yellow loosestrife).

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.145-159
• /
• 2004

A mathematical model and its computer solution program were proposed to analyze the motion of contact lenses which are being subject to lid-blinking. The equation was derived by incorporating an acceleration induced lid's force exerting on the contact lens, the viscous damping resistance in the tear layer beneath the lens and the sliding frictional force between the lid and the contact lens surface into the formulation of differential equation describing the vibration. The model predicts the time-dependent displacement from the equilibrium postion during/after the blinking. During the blinking, as the time for the completion of one cycle of blinking decreases the off-the-equilibrium displacement of contact lens increases while the decrease of diameter in the contact cause the opposite effect. It is found that lid pressure exerting on the lens cause an insignificant lens displacement from the equilibrium position. After blinking the frequency of damped oscillation of contact lens decreases as the diameter of lens increases, due to the incresed surface while the reduced blinking time does not cause a significant frequency change. This is because that driving force for the contact lens movement posterior to blinking is the capillary-induced force not the lid force.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.82-92
• /
• 2020

Modern artworks are constructed using a variety of materials and techniques. Sculptures, which predominantly consist of metals, usually have different shapes and consist of different material mixtures. The structural and material properties of these sculptures are often controlled by conservation treatment methods. However, the application of existing treatment methods is challenging at times, indicating that more diverse treatment materials and techniques are necessary. Therefore, in this study, a treatment method that employs volatile corrosion inhibitor(VCI) powder, rather than an anti-corrosion solution, for the conservation and management of metal artworks was used. VCI powder and VCI films containing VCI powder were used, and the results obtained confirmed that both of them showed anti-corrosion effect. Only a slight change in the chromaticity of metal samples was observed, and compared to the untreated samples, the application of the VCI powder resulted in a decrease in the rate of corrosion by half. Moreover, VCI film tests revealed that comparing to the untreated or polyethylene film-treated samples, VCI film treatment resulted in a decrease in the occurrence of corrosion compounds. The contact angle, surface energy, and surface electrical resistance were measured, and the evaluation of these surface properties established the anti-corrosion effect of VCI. Additionally, direct application of VCI and VCI films on actual sculptures further confirmed the anti-corrosion effect of VCI.

• Journal of Nutrition and Health
• /
• v.51 no.3
• /
• pp.201-207
• /
• 2018

Purpose: Obesity, a worldwide epidemic, is associated with insulin resistance, hyperlipidemia, hypertension, cardiovascular disease, and certain cancers. Many strategies, including natural alternative anti-obesity agents, are used widely to prevent obesity. This study examined the effects of silkworm hemolymph on the weight control of C57BL/6N mice fed with a high-fat diet. Methods: The mice were divided into five groups: normal group (N), high-fat diet group (HFC), high-fat diet and silkworm hemolymph (at dose of 1 mL/kg BW (HFS-1), 5 mL/kg BW (HFS-5) and 10 mL/kg (HFS-10) for 12 weeks. Results: After 12 weeks treatment, the administration of silkworm hemolymph decreased the final body weight significantly along with a decrease in the weights of epididymal fat and total fat. The plasma LDL-cholesterol concentration was significantly lower in the HFS-1, HFS-5, and HFS-10 groups than in the HFC group. In addition, the leptin level of the HFS groups was significantly lower than those of the HFC group without a change in the plasma insulin concentration. Conclusion: These findings suggest that the silkworm hemolymph may have the potential to prevent obesity.