• 대한금속재료학회지
• /
• 제46권8호
• /
• pp.477-481
• /
• 2008

The secondary hardening and fracture behavior in P/M high speed steels bearing V content of 9 to 10 wt% have been investigated in terms of austenitizing temperature and precipitation behavior. Austenitizing was conducted at 1,100 and $1,175^{\circ}C$ of relatively low and high temperatures. Coarse primary carbides retained after austenitization were mainly V-rich MC type. They give a significant influence on hardeness and toughness, as well as wear resistance. Tempering was performed in the range of $500{\sim}600^{\circ}C$. The peak hardness resulting from the precipitation of the fine MC secondary carbides was observed near 520, irrespective of austenitizing temperature. Aging acceleration(or deceleration) did not occur with increasing austenitizing temperature because it mainly influences contents of V and C of matrix through the dissloution of coarse primary MC containing lots of V and C. The precipitation of secondary MC carbides, which also contain V and C, did not change the aging kinetics itself. In the 10V alloy containing much higher C content, the impact toughness was lower than 9V alloy, because of the larger amount of primary carbide and high hardness.

• 정보보호학회논문지
• /
• 제19권5호
• /
• pp.175-188
• /
• 2009

패스워드는 그 자체만으로도 낮은 복잡도를 가지고 있을 뿐만 아니라, 안전하지 않은 환경에서 그대로 키보드와 같은 입력 장치를 통하여 입력하는 행위는 훔쳐보기와 같은 공격으로 쉽게 노출될 수 있다. 이러한 문제를 극복하고자 사용자 비밀의 형태를 다른 것으로 바꾸거나 복잡한 입력과정을 통하여 입력을 수행하는 방법들이 제안되어 왔으나, 보안성과 사용자 편의성에 있어서 적합한 타협점을 찾지 못하고 있다. 이 논문에서는 행렬 상에 문자들 사이에서의 연산을 통하여 기존 형태의 패스워드를 비밀로 사용하는 인증 기법에 대해서 소개한다. 다양한 각도에서의 분석을 통하여 기법이 갖는 안전성을 보이고, 사용자 실험을 통하여 사용자들이 실제로 느끼는 기법에 대한 어려움 등을 확인할 것이다.

• 정보보호학회논문지
• /
• 제21권1호
• /
• pp.77-84
• /
• 2011

문자와 숫자의 조합으로 이루어진 패스워드는 외우기 쉽고 사용하기 쉽지만 낮은 복잡도를 가지고 있다. 그렇기 때문에 안전하지 않은 환경에서 키보드와 같은 입력 장치를 통하여 패스워드를 그대로 입력하는 행위는 훔쳐보기와 같은 공격으로 쉽게 노출될 수 있다. 이러한 문제를 극복하고자 사용자 비밀의 형태를 다른 것으로 바꾸거나 복잡한 입력과정을 통하여 인증을 수행하는 방법들이 제안되고 있으나, 보안성과 사용자 편의성에 있어서 적합한 타협점을 찾지 못하고 있다. S3PAS는 사용자의 편의성을 만족시키면서 훔쳐보기로부터 사용자의 패스워드를 보호할 수 있는 보안성도 갖추었다고 알려진 인증기법이다. 그러나 공격자가 인증 세션을 여러 번 바라본 이후에 얻어낸 정보를 이용하여 인증을 시도하는 교차 공격에 대해서는 고려하지 않았다. 이 논문에서는 S3PAS에 대하여, 인증세션이 여러 번 공격자에게 노출되었을 때 발생할 수 있는 보안문제에 대해서 살펴보고, 사용자 실험과 모의실험을 통하여 이를 확인한다. 또한, 이러한 문제를 극복하기 위한 대안에 대하여 고찰한다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.30-35
• /
• 2021

The casting method uses a mold to solidify a liquid metal to make a solid metal. Since it uses a liquid metal with the least deformation resistance, it has the characteristic that it can easily manufacture even a complex shape. However, the process of solidifying a liquid metal into a solid metal inevitably involves a volume change and contains internal defects such as shrinkage holes. Therefore, in the design of the casting plan, an excess volume called a pressurization compensates for the volume shrinkage. in the product, and it induces the shrinkage hole defects to occur in parts other than the product1). In this study, casting analysis was performed using casting analysis software (anycasting) in order to optimize the design of the tilting gravity casting method for automobile brackets. In particular, the filling and solidification analysis according to the shape and volume of the pressurized metal was conducted, and applied to the actual product to study the effect of the pressurized metal on the shrinkage defect. Through this study, it is possible to understand the effect of the pressure metal on shrinkage defects in the actual product and propose a design of the pressure metal that improves reliability and productivity.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.43-49
• /
• 2021

The Commercial polymeric membranes like Polysulfone (PSF), Polyvinylidene difluoride (PVDF) and Polyacrylonitrile (PAN) which are an integral part of water purification investigation were chosen for the shockwave (SW) exposure experiment. These membranes were prepared by blending polymer (wt. %) / DMF (solvent) followed by phase-inversion casting technique. Shockwaves are generated by using Reddy Tube lab module (Table-top Shocktube) with range of pressure (1.5, 2.5 and 5 bar). Understanding the changes in membrane before and after shock wave treatment by parameters, i.e., pure water flux (PWF), rejection (%), porosity, surface roughness (AFM), morphology (SEM) and contact angle which can significantly affect the membrane's performance. Flux values PSf membranes shows increase, 465 (pristine) to 524 (1.5wt%) LMH at 50 Psi pressure and similar enhancement was observed at 100Psi (625 to 696 LMH). Porosity also shows improvement from 73.6% to 76.84% for 15wt% PSf membranes. It was observed that membranes made of polymers such as PAN and PSF (of high w/w %) exhibits some resistance against shockwaves impact and are stable compared to other membranes. Shockwave pressure of up to 1.5 bar was sufficient enough to change properties which are crucial for performance. Membranes exposed to a maximum pressure of 5 bar completely scratched the surface and with minimum pressure of 1.5bar is optimum enough to improve the water flux and other parameters. Initial results proved that SW may be suitable alternative route to minimize/control membrane fouling and improve efficiency.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.65-80
• /
• 2021

Irregularities of a building in plan and elevation, which results in the change in stiffness on different floors highly affect the seismic performance and resistance of a structure. This study motivated to investigate the seismic responses of high-rise steel-frame buildings of twelve stories with various stiffness irregularities. The building has five spans of 3200 mm distance in both X- and Z-directions in the plan. The design package SAP2000 was adopted for the design of beams and columns and resulted in the profile IPE500 for the beams of all floors and box sections for columns. The column cross-section dimensions vary concerning the number of the story; one to three: 0.50×0.50×0.05m, four to seven: 0.45×0.45×0.05 m, and eight to twelve: 0.40×0.40×0.05 m. Real recorded ground accelerations obtained from the Vrancea earthquake in Romania together with dead and live loads corresponding to each story were considered for the applied load. The model was validated by comparing the results of the current method and literature considering a three-bay steel moment-resisting frame of eight-story height subject to seismic load. To investigate the seismic performance of the buildings, the time-history analysis was performed using ABAQUS. Deformed shapes corresponding to negative and positive peaks were provided followed by the story drifts and fragility curves which were used to examine the probability of collapse of the building. From the results, it was concluded that regular buildings provided a seismic performance much better than irregular buildings. Furthermore, it was observed that building with torsional irregularity was more vulnerable to seismic failure.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.387-396
• /
• 2022

Recently, e-Mobility, which is a personal mobility device such as an electric bicycle or an electric scooter, is rapidly emerging. However, since E-Mobility has various voltage systems due to the characteristics of its products, it is essential for companies that operate them to use multiple dedicated chargers. A universal charger capable of charging batteries of various voltage systems with one charger is required to reduce the cost of purchasing and managing multiple dedicated chargers. For this, information on the EOC(End of Charge) is essential. In order to know the EOC, it is necessary to detect the internal impedance of the battery. However, the internal impedance of the battery changes according to various conditions such as SOH(State Of Health), SOC(State Of Charge), and ambient temperature. By observing the change in these parameters, the state of the battery can be diagnosed and the EOC can be predicted. In this paper, we propose an algorithm to analyze the battery's internal impedance and to predict the EOC, in order to acquire information on the EOC of the battery, which is an essential requirement of a universal charger.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제33권2호
• /
• pp.35-40
• /
• 2022

Objectives: Restricted and repetitive behaviors (RRBs) are a core symptom in the diagnosis of autism spectrum disorder (ASD). The complexity of behavioral patterns has called for the creation of phenotypically homogeneous subgroups among individuals with ASD. The purpose of this study was 1) to investigate the different types of RRBs and 2) to explore whether subgroups created by RRBs would show unique levels of functioning in toddlers and young children with ASD. Methods: A total of 313 children with ASD, aged 12-42 months were included in the analysis. The Autism Diagnostic Interview-Revised was used to obtain information on the different types of RRBs by grouping 15 items into six categories. The Vineland Adaptive Behaviors Scale, a parent-reported questionnaire, was used to measure adaptive functioning. A portion of the children were analyzed separately for verbal-related RRBs based on their expressive language level. Two-step cluster analysis using RRB groups as features was used to create subgroups. Analysis of covariance while covarying for age and language was performed to explore the clinical characteristics of each cluster group. Results: Sensory-related RRBs were the most prevalent, followed by circumscribed interests, interest in objects, resistance to change, and repetitive body movements. A subset of the children was analyzed separately to explore verbal-related RRBs. Four cluster groups were created based on reported RRBs, with multiple RRBs demonstrating significant delays in adaptive functioning. Conclusion: Heterogeneity of RRBs emerges at a young age. The different patterns of RRBs can be used as valuable information to determine developmental trajectories with better implications for treatment approaches.

• 접착 및 계면
• /
• 제23권3호
• /
• pp.80-86
• /
• 2022

본 연구에서는 수계형 아크릴 점착제의 성능 및 점착 물성을 향상시키기 위해 분자량 조절제인 1-dodecanethiol(n-DM)의 함량이 다른 수계 아크릴 점착부여제를 합성하였으며 수계 아크릴 점착부여제의 투입량에 따른 물성 변화 확인을 위해 수분산성 아크릴 에멀젼에 수계 아크릴 점착부여제를 10/20/30 phr로 투입하여 물성을 측정하였다. 합성된 수계 아크릴 점착부여제의 분자량 및 유리전이온도(T_g)는 n-DM의 함량이 증가함에 따라 감소하는 경향을 나타내었다. 수분산성 아크릴 에멀젼에 수계 아크릴 점착부여제를 첨가하였을 때의 점착력 및 내열 유지력은 증가하였으며 수계 아크릴 점착부여제를 10 phr 또는 20 phr로 투입하였을 때에 가장 우수한 값을 나타내었다.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.685-691
• /
• 2021

Background and objective: Understanding abstract art as an art form requires depth of thought. Moreover, understanding land art as abstract art is challenging, given its focus on the minimalism and abstract concepts. Much focus, research, and work were actively conducted in the 1970s, as it represented an abstract expression of minimalism. The characteristics of minimalism connote abstract meanings in the use of materials. Nevertheless, the original research of works or artists has often been mentioned, but few studies have analyzed the abstract language of land art materials. The aim of this study is to thus determine the abstract meanings of materials in land art from the 1970s to the 2010s. Methods: Art-based research was employed to address the aim. This study classified the land art materials into intangible and tangible materials, where intangible materials focused on lines, circles, and labyrinths, and tangible materials focused on the earth, stones, wood, and snow. Results: Intangible and tangible materials of land art conveyed various abstract meanings. Intangible materials were reflective of connection and symbiosis with nature, delivering abstract languages of 'take-nothing,' 'reflection' and 'opportunity.' Tangible materials reflected the abstract concepts of 'intervention,' 'resistance,' 'unliving,' and 'change,' and conveyed caveats. In other words, taken together, intangible and tangible materials were presented in symbiosis-and with caveats-and delivered messages for the present and the future. Interestingly, intangible materials inherently reflect symbiosis and communicate caveats in works based on a non-contextualized present and future. Conclusion: Interpretation of the abstract languages derived from intangible and tangible materials could imply a symbiosis between humans and nature, while conveying the message that caveats, to humans, are still ongoing. This relationship plays a significant role in an artist's selection of a medium, which is reflective of abstract beliefs reflected in contemporary, nature-based works created on Earth.