• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.249-252
• /
• 2000

To overcome problems of excavation technology far repairing or replacing underground buried pipes which are worn out or damaged, various trenchless repair-reinforcement technologies have been invented. But these trenchless technologies also have many problems in the aspect of economy and convenience of operation. In this research, the repair-reinforcement process using RTM (Resin Transfer Molding) which can solve problems of present trenchless technologies was developed. The resin wetting and void removal during RTM process to form large composite structures inside of buried pipes were experimentally investigated. From the experiment, it was found that the new technology had advantage over conventional methods by employing appropriate process parameters and void removal vents.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.409-414
• /
• 2000

In order to examine the availability and effectiveness of crab shell for the removal of heavy metals in aqueous solution the crab shell was compared with cation exchange resin(CER), zeolite granular activated carbon (GAC) and powdered activated carbon(PAC) on aspects of heavy metal removal capacity rate and efficiency. In the removal of Pb, Cd and Cr, the heavy metal removal capacity of crab shell was higher than those of any other sorbents (CER, zeolite, GAC, PAC) and the order of heavy metal removal capacity was crab shell>CER>zeolite>PAC GAC. However in the removal of Cu, the result of crab shell was slightly lower than that of CER. The initial heavy metal removal rate was affected by the sorts of sorbents and metals. In all heavy metals the heavy metal removal rate of crab shell was higher than those of any other sorbents. Under the heavy metal concentration of 1.0 mmole/$\ell$ the heavy metal removal efficiency of crab shell was maintained as 93~100% which was much higher than those of any other sorbents.

• 방사성폐기물학회지
• /
• 제4권4호
• /
• pp.373-384
• /
• 2006

중수로 원전내 여러 계통으로 부터 발생된 폐수지내에는 $^{14}C$ 핵종이 다량 함유되어 있으며, Class A 및 C 폐기물로 분류되는 폐수지의 적정 처리 기술 개발을 위한 기초연구를 수행하였다. IRN-150 혼상 이온교환수지를 이용하여 비방사성 $HCO_3$ 이온과 양이온의 흡착 특성 및 탈차용액을 이용한 $HCO_3$ 이온의 제거 특성을 고찰하였다. IRN-150 수지의 $HCO_3$ 이온의 흡착능은 이론값에 근접한 11 mg-C/g-IRN-150을 나타내었고, $CS^+,\;CO_2^+,\;Na^+,\;NH_4^+$ 양이온의 흡착 친화도를 단일성분 및 복합성분 시스템을 이용하여 분석하였다. 여러 가지 탈착용액을 이용한 폐수지로부터 $HCO_3$ 이온의 제거 특성을 평가한 결과, $^{14}C$ 핵종을 전량 효과적으로 제거하기 위해서는 $NaNO_3,\;Na_3PO_3$ 보다도 $NH_4H_2PO_4$ 용액이 유리한 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.399-408
• /
• 2001

Tooth bleaching has been prevailing recently for its ability to recover the color and shape of natural teeth without reduction of tooth material. However, it has been reported that bleaching procedure adversely affects the adhesive bond strength of composite resin to tooth. At the same time the bond strength was reported to be regained by application of some chemical agents. The purpose of this in vitro study was to investigate the effect of the removal of residual peroxide on the composite- enamel adhesion and also evaluated fracture mode between resin and enamel after bleaching. Sixty extracted human anterior and premolars teeth were divided into 5 groups and bleached by combined technique using of office bleaching with 35 % hydrogen peroxide and matrix bleaching with 10% carbamide peroxide for 4 weeks. After bleaching, the labial surfaces of each tooth were treated with catalase, 70% ethyl alcohol, distilled water and filled with composite resin. Shear bond strength was tested and the fractured surfaces were also examined with SEM. Analysis revealed significantly higher bond strength values. (p＜0.05) for catalase-treated specimens, but water-treated specimens showed reduction of bond strength, alcohol- treated specimens had medium value between the two groups(p＜0.05). The fracture mode was shown that the catalase group and the alcohol group had cohesive failure but the water sprayed group had adhesive failure. It was concluded that the peroxide residues in tooth after bleaching seems to be removed by gradual diffusion and the free radical oxygen from peroxide prevents polymerization by combining catalyst in the resin monomer. Therefore it may be possible to eliminate the adverse effect on the adhesion of composite resin to enamel after bleaching by using water displacement solution or dentin bonding agent including it for effective removal of residual peroxide.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.359-372
• /
• 2015

Purpose: Through studying the expert's and non-experts panel responses to the questions regarding the attributes of chemical-biological protection cloth quality in terms of the levels of customer demand and technical factors has been studied. We are applied to a QFD matrix with find out the relationship between the selective removal efficiency of chemical-biological cloth and the guidelines of technical approach. Methods: We fabricated several composite of ion-exchange resins with selectively permeable performance designed to facilities water vapor transport and selective adsorption of the harmful gases. With these materials, we characterized on the selectively permeable performance to identify ion-exchange resin with chemical-biological protective cloth. Results: Results showed that ion exchange materials possessed performance with selectively efficiencies as NH3, SOx, NOx and HCl gas. The selective adsorption amount of ammonia and hydrogen gases were $90-80{\mu}g/g$ with TRILITE SCR-BH sulfonated ion exchange resin. The PP non-woven/ion exchange resin adsorbent materials possessed performance with water vapor permeability were 1,100-1,350 g/m2/day, it's was two times high value compare with activated carbon. With these materials, we characterized selectively removal efficiency to identify new ion-exchange material with chemical-biological protective capability. Conclusion: This study shows that a QFD aids in deciding with of the adsorption parameters to optimized with chemical-biological protection cloth manufacturing.

• 한국정보전자통신기술학회논문지
• /
• 제2권3호
• /
• pp.97-102
• /
• 2009

심층수를 음용수화 하는 것은 심층수에 포함되어 있는 붕소 때문에 크게 제약을 받고있다. 붕소는 사람과 식물에게 유독한 것으로 보고되고 있다. 이러한 붕소를 제거하는 유용한 방법이 몇 가지 있는데, 본 논문에서는 해수에 포함된 붕소를 제거하기 위한 붕소제거제를 폴리머 레진 형태로 합성 하였다. 합성된 레진을 IR분석을 통해 특성을 분석하였고, SEM을 이용하여 그 표면을 관찰하였다. 붕소제거능력을 평가하기 위해 레진을 직경이 0.25mm, 0.5mm 및 1.0mm가 되도록 구분하여 준비하고 베치방식의 실험을 통해 그 결과를 관찰했다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.165-175
• /
• 2005

Measurement of spent resin activity was initiated in 2004 in order to develop the C-14 removal technology for safe disposal. As part of this program, spent resins were sampled and measured in the in-station resin storage tank 2 at Wolsong Nuclear Power Plant Unit 1. At the time of sampling, the resins had been in storage tank from 3 to 23 years. Total 72 resin samples were sampled, which were collected from both man-hole (68 samples) and test-hole (4 samples) in the in-station resin storage tank 2. They were separated into liquid, activated carbon, zeolite, and spent resin. The spent resins were oxidized with sample oxidizer and analyzed for C-14. Ten of collected mixed resin samples were separated by density into cation and anion resins using a sugar solution. The C-14 concentration in anion exchange resin was approximately 2 times higher than in the mixed resin. The average concentration of C-14 in the cation/anion mixed exchange resin was $460\;GBq/m^3$ from test-hole and $53.1\;GBq/m^3$ from man-hole. We have found that concentration of C-14 in the spent resin is about from 0.4 to $1,321\;GBq/m^3$. So it could be a problem, when dispose of at a repository, since there is a disposal limit of $222\;GBq/m^3$. This means we should develop the C-14 removal technology.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.131-140
• /
• 2008

The application of magnetic ion exchange resin($MIEX^{(R)}$) is effective for natural organic matter(NOM) removal and for control of the formation of disinfection byproducts(DBPs). NOM removal is also enhanced by adding $MIEX^{(R)}$ with coagulant such as polyaluminium chloride(PACl) in conventional drinking water treatment systems. In the application of $MIEX^{(R)}$, it is important to understand changes of NOM characteristics such as hydrophobicity and molecular weight distributions with $MIEX^{(R)}$ or $MIEX^{(R)}$+coagulant treatment.To observe characteristics of NOM by treatment with $MIEX^{(R)}$ or $MIEX^{(R)}$+coagulant, four major drinking water sources were employed. Results showed that the addition of $MIEX^{(R)}$ to coagulation significantly reduced the amount of coagulant required for the optimum removal of dissolved organic matter(DOC) and turbidity in the all four waters. The DOC removal was also increased approximately 20%, compared to coagulant treatment alone. The process with $MIEX^{(R)}$ and coagulant showed that complementary removal of hydrophobic and hydrophilic fraction of DOC. The combined processes preferentially removed the fractions of intermediate (3,000-10,000 Da) and low (< 500 Da) molecular weight. The microfiltration test showed that membrane cake resistance was decreased for waters with flocs from $MIEX^{(R)}$+coagulant. A porous layer was formed to $MIEX^{(R)}$ on the membrane surface and the layer consequently inhibited settling of coagulant flocs, which could act on a foulant.

• 생명과학회지
• /
• 제7권2호
• /
• pp.73-78
• /
• 1997

시판되고 있는 강염기성 $Cl^{-}$형의 음이온 교환수지를 사용하여 회분식 질산성 질소 제거 실험을 행하여 다음과 같은 결과를 얻었다. 수지의 종류에 따라 제거특성은 달랐다. 수지의 량이 많을수록, 계의 온도가 톡을 수록 질산성 질소이 제거효율은 높아졌다. 원수의 농도는 낮을수로그 원수의 공급유속은 느릴수록 질산성 질소의 제거효율이 좋았다. 음이온에 디한 겔형 이온교환수지인 SA 10A의 선택성은 ${SO_4}^{2-}>{No_3}^->NO_{2-}>{HCO_3}^-$로써 이온가 수가 높은 이온일수록 선택성이 증가하고 은 이온가인 경우에는 원자번호가 클수록 그리고 수화반경이 작을수록 선택성이 증가하였다. 증가하였다.

• 상하수도학회지
• /
• 제8권3호
• /
• pp.9-18
• /
• 1994

활성슬러지 공정을 이용하여 Kraft 펄프공장에서 배출되는 유출수에 잔류하는 만성독성의 제거가능성을 평가하기 위하여 pilot plant를 운전하였다. 독성 이외에도 폐수내의 BOD, SS, resin과 fatty acids, 색도, 그리고 AOX와 같은 오염물질의 제거효과도 측정되었다. Pilot plant는 정상상태에서 약 10주 동안 운전되었으며 운전기간 동안의 평균 F/M 비율은 0.28, 그리고 sludge age는 8.4일로 계산되었다. 평균 MLSS 농도는 4,309mg/l이었으며 이중 휘발성 물질은 57%이었다. 운전기간 동안, BOD 제거계수(k)는 $30^{\circ}C$에서 8.2/일 이었으며 BOD 제거율은 full-scale 운전시보다 3~6% 정도 낮은 84%로 나타났다. 활성슬러지 유출수의 만성독성 시험은 Dinnel 방법과 BML 방법이 활용되었으며, 시험결과 pilot plant 활성슬러지 시스템에서도 효율적인 운전을 통하여 90% 이상의 독성제거가 가능함을 알 수 있었다. Pilot plant의 진 공정을 통해서 색도와 AOX의 제거는 매우 미미하였으나 resin과 fatty acids는 뛰어난 제거율을 나타내었다.