• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.47-53
• /
• 1985

요소-formaldehyde 수지를 여러 가지 조건에서 견직물에 처리하여 다음과 같은 결과를 얻었다. 1. 수명수지의 생성 조건은 요소 1mol에 대하여 formaline을 2mod 이상 사용하여 pH 4∼5로 수지욕을 만들어야 한다. 2. 수지농도가 증가하는데 비례적으로 수지부착율도 증가한다. 상대적으로 수분율을 감소하는 경향을 보였다. 3. wet pick 70%, 80%, 90%, 100% 중에서 70%일 경우가 수지잔존율이 가장 높았다. 4. curing 조건에 따른 수지의 부착율은 온도가 높을수록 탈락율은 감소하며 부착율은 증가된다. 5. 촉매의 양은 (NH4)2SO4 경우는 수지에 대하여 2.5%, HCI 경우는 1%, tataric acid 경우는 10%가 적당하였고 나머지 NaHCO3, Zn(NO3)2·6H2O인 경우는 분석이 곤란하였다. 6. 촉매의 종류에 따른 부착율은 산성 혹은 (NH4)2SO4와 같은 잠복성 촉매가 뛰어난 효과를 나타냈다. 7. 촉매에 따른 세탁견뢰성은 산성 촉매일수록 뛰어난 효과를 나타냈다.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.44.1-44.9
• /
• 2020

Objectives: Phytic acid (IP6), a naturally occurring agent, has been previously reported as a potential alternative to ethylenediaminetetraacetic acid (EDTA). However, its effect on adhesion to sodium hypochlorite (NaOCl)-treated dentin and its interactions with NaOCl have not been previously reported. Thus, in this study, the effects of IP6 on resin adhesion to NaOCl-treated dentin and the failure mode were investigated and the interactions between the used agents were analyzed. Materials and Methods: Micro-tensile bond strength (µTBS) testing was performed until failure on dentin treated with either distilled water (control), 5% NaOCl, or 5% NaOCl followed with chelators: 17% EDTA for 1 minute or 1% IP6 for 30 seconds or 1 minute. The failed specimens were assessed under a scanning electron microscope. The reaction of NaOCl with EDTA or IP6 was analyzed in terms of temperature, pH, effervescence, and chlorine odor, and the effects of the resulting mixtures on the color of a stained paper were recorded. Results: The µTBS values of the control and NaOCl with chelator groups were not significantly different, but were all significantly higher than that of the group treated with NaOCl only. In the failure analysis, a distinctive feature was the presence of resin tags in samples conditioned with IP6 after treatment with NaOCl. The reaction of 1% IP6 with 5% NaOCl was less aggressive than the reaction of the latter with 17% EDTA. Conclusions: IP6 reversed the adverse effects of NaOCl on resin-dentin adhesion without the chlorine-depleting effect of EDTA.

• 산업식품공학
• /
• 제15권3호
• /
• pp.276-281
• /
• 2011

탈지미강으로부터 피틴산을 추출 및 정제하기 위한 최적조건을 설정하였다. 탈지미강을 10배수의 0.5% HCl 용액으로 1시간 처리하였을 때 피틴산의 추출효율이 가장 좋았으며 중화제로는 0.5% NaOH 용액이 적합하였다. 피틴산의 정제를 위하여 Diaion HP20 흡착 컬럼을 이용하여 불순물을 제거한 후 여러 가지 이온교환수지를 이용하여 피틴산을 정제하였을 때 Amberlite IRA-416 이온교환수지의 회수율이 가장 높았다. Amberlite IRA-416 이온교환수지를 이용하여 피틴산을 수지에 흡착시킨 다음 0.5% NaOH 용액으로 용출시켰을 경우 89%의 회수율을 나타내었다. 정제된 피틴산의 총단백질 함량은 0.14%(w/w)로 대부분의 단백질이 제거됨을 확인하였다.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.498-503
• /
• 2016

The characteristics of aqueous lithium recovery by ion exchange were studied using three commercial cation exchange resins: CMP28 (porous type strong acid exchange resin), SCR-B (gel type strong acid exchange resin) and WK60L (porous type weak acid exchange resin). CMP28 was the most effective material for aqueous lithium recovery; its performance was even enhanced by modifying the cation with $K^+$. A comparison to $Na^+$ and $H^+$ form resins demonstrated that the performance enhancement is reciprocally related to the electronegativity of the cation form. Further kinetic and equilibrium isotherm studies with the $K^+$ form CMP28 showed that aqueous lithium recovery by ion exchange was well fitted with the pseudo-second-order rate equation and the Langmuir isotherm. The maximum ion exchange capacity of aqueous lithium recovery was found to be 14.28 mg/g and the optimal pH was in the region of 4-10.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2381-2384
• /
• 2014

A solid-phase synthetic approach is reported for the synthesis of an ascorbic acid (ASA)-dipeptide conjugate that exhibited enhanced antioxidant activity. The N-terminal amino group of dipeptide (Ala-Ala) on a resin support was first activated by 1,1'-carbonyldiimidazole (CDI), and then reacted with an ASA derivative. The addition of a base, triethylamine (TEA), promoted nucleophilic acylation of ASA derivative and yielded a desired product (ASA-Ala-Ala) with enhanced purity, when cleaved from the resin. Compared to the approach where a C3 hydroxyl group of ASA was first activated with CDI and then reacted with the amino group of dipeptide on the resin, this new approach allowed a significant reduction of a total reaction time from 120 h to 8 h at $25^{\circ}C$. As-prepared ASA-dipeptide conjugate (ASA-Ala-Ala) showed improved antioxidant activity compared to ASA.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.317-322
• /
• 2015

PURPOSE. The aim was to evaluate the effect of curing mode and different dentin surface pretreatment on microtensile bond strength (${\mu}TBS$) of self-adhesive resin cements. MATERIALS AND METHODS. Thirty-six extracted human permanent molars were sectioned horizontally exposing flat dentin surface. The teeth were divided into 12 groups (3 teeth/group) according to the dentin surface pretreatment methods (control, 18% EDTA, 10% Polyacrylic acid) and curing mode (self-curing vs. light-curing) of cement. After pretreatment, composite resin blocks were cemented with the following: (a) G-CEM LinkAce; (b) RelyX U200, followed by either self-curing or light-curing. After storage, the teeth were sectioned and ${\mu}TBS$ test was performed using a microtensile testing machine. The data was statistically analyzed using one-way ANOVA, Student T-test and Scheffe's post-hoc test at P<.05 level. RESULTS. For G-CEM LinkAce cement groups, polyacrylic acid pretreatment showed the highest ${\mu}TBS$ in the self-cured group. In the light-cured group, no significant improvements were observed according to the dentin surface pretreatment. There were no significant differences between curing modes. Both dentin surface pretreatment methods helped to increase the ${\mu}TBS$ of RelyX U200 resin cement significantly and degree of pretreatment effect was similar. No significant differences were found regarding curing modes except control groups. In the comparisons of two self-adhesive resin cements, all groups within the same pretreatment and curing mode were significantly different excluding self-cured control groups. CONCLUSION. Selecting RelyX U200 used in this study and application of dentin surface pretreatment with EDTA and polyacrylic acid might be recommended to enhance the bond strength of cement to dentin.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.98-103
• /
• 2013

PURPOSE. To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS. Fifty-five ceramic blocks ($5mm{\times}5mm{\times}2mm$) were fabricated and embedded in acrylic resin. Their surfaces were finished with 1000-grit silicon carbide paper. The blocks were assigned to five groups: 1) 9.5% hydrofluoric-acid etching for 60 s; 2-4), 1.5-, 2.5-, and 6-W Er,Cr:YSGG laser applications for 60 seconds, respectively; and 5) no treatment (control). One specimen from each group was examined using scanning electron microscopy. Ceramic primer (Rely X ceramic primer) and adhesive (Adper Single Bond) were applied to the ceramic surfaces, followed by resin cement to bond the composite cylinders, and light curing. Bonded specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strengths were determined by a universal testing machine at 1 mm/min crosshead speed. Data were analyzed using Kruskal-Wallis and Mann-Whitney U-tests (${\alpha}$=0.05). RESULTS. Adhesion was significantly stronger in Group 2 ($3.88{\pm}1.94$ MPa) and Group 3 ($3.65{\pm}1.87$ MPa) than in Control group ($1.95{\pm}1.06$ MPa), in which bonding values were lowest (P<.01). No significant difference was observed between Group 4 ($3.59{\pm}1.19$ MPa) and Control group. Shear bond strength was highest in Group 1 ($8.42{\pm}1.86$ MPa; P<.01). CONCLUSION. Er,Cr:YSGG laser irradiation at 1.5 and 2.5 W increased shear bond strengths between ceramic and resin cement compared with untreated ceramic surfaces. Irradiation at 6 W may not be an efficient ceramic surface treatment technique.

• 공업화학
• /
• 제5권4호
• /
• pp.698-705
• /
• 1994

Linseed oil fatty acid(LOFA), phthalic anhydride(PAA) 및 maleic anhydride(MA), trimethylol propane(TMP)을 사용하여 기본적인 유장(oil length) 50%의 중유성 기본 알키드를 합성하고 trimethylol propane triacrylate(TMPTA)를 그라프트 공중합시켜 MA/TMPTA 변성 알키드 수지를 제조하였다. 수지의 산가는 MA 첨가량으로 제어하였으며, 수용화에는 N,N-dimethylethanol amine(DMEA)를 사용하였다. TMPTA의 첨가량 변화에 의한 분자량, 유리 전이온도, 수용화 후의 점성도 및 그라프트율을 측정하였으며, 가교도막의 경화온도별 겔분율 변화를 조사하였다. 또한 멜라민 수지 경화 도막의 내열성, 내자외선성, 내수성 및 저장 안정성을 측정하고, TMA/TMPTA 변성 알키드 수지의 물성과 비교하였다. TMPTA의 첨가량이 증가할수록 수용화 후의 점성도, 겔분율, 그라프트율 및 분자량이 증가하였으며, 유리 전이온도(Tg)는 감소하였다. 고형분 함량에 따른 점성도 변화는 고형분 30%일 때보다 40%일 때가 더 낮게 나타났으며, 중화도에 따른 점성도 변화는 중화도가 높을수록 낮은 점성도를 나타내썼다. 내열성, 내자외선성, 내수성은 MA/TMPTA 변성 알키드 수지가 TMA/TMPTA 변성 알키드 수지보다 우수하였으나, 저장 안정성은 TMA/TMPTA 변성 알키드 수지가 우수함을 알 수 있었다.

• 방사성폐기물학회지
• /
• 제3권1호
• /
• pp.41-47
• /
• 2005

Cs$^{+}$ 이온에 대해 선택성을 갖는 ferrocyanide-음이온 교환수지를 제조하여 모의 제 염폐액 내에 존재하는 Cs$^{+}$ 이온에 대한 흡착실험을 수행하였다. 제조된 이온교환 수지가 citric acid를 주제염제로 하는 제염폐액 내에 존재하는 Cs+ 이온에 대한 흡착능력은 상용 양이온교환수지에 비해 4배 이상 효과적인 것으로 나타났다. 모의 제염폐액과 선택성 이온교환수지를 접촉시킨 후 360분이 경과하면 금속이온에 대한 흡착반웅이 평형에 도달하였다. 본 연구범위에서 Co$^{2+}$ 이온농도가 필요이상 증가하게 되면 Cs$^{+}$ 이온의 흡착율은 감소하였다. 과산화수소와 히드라진을 사용한 선택성 폐 이온교환수지의 재생실험 결과 전기중성화조건을 만족시키기 위해 Cs$^{+}$ 이온이 수지로부터 용출됨을 확인하였고 열화없이 재 사용가능성을 확인하였다.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.689-698
• /
• 1998

법랑질의 표면처리에 따른 광중합형 글래스아이오노머 시멘트의 전단결합강도를 알아보고자 사람 소구치 80개를 선택하여 8개군으로 나누어 전단 결합 강도를 측정하고, 접착 파절의 양상을 평가하여 다음과 같은 결과를 얻었다. $1.37\%$ 인산용액으로 부식한 후 건조상태에서 글래스아이오노머 시멘트, 광중합형 레진, 화학중합형 레진으로 각각 부착한 실험군에서 글래스아이오노머 시멘트 실험군의 전단결합강도는 두 군과 유의한 차가 없었으나 화학중합형 레진군의 그것은 광중합형 레진군에 비해 유의성있게 낮았다 (p<0.05). $2.37\%$ 인산 실험군, $10\%$ 폴리 아크릴산 실험군, $1.23\%$ APF 실험군, 산처리하지 않은 실험군의 습한 상태에서 부착한 글래스아이오노머 시멘트의 전단결합강도에서 산처리하지않은 실험군의 그것이 유의성 있게 낮았으며, 그 외 군간에는 유의성 있는 차이가 없었다 (p<0.05). 3. 글래스아이오노머 실험군에서 습기의 존재가 전단결합강도에 유의성 있는 영향을 미치지 않았다 (p<0.05). 4. 산부식처리를 하지않은 군의 접착제 잔류지수가 가장 낮았으며 $37\%$인산용액으로 처리한 군의 접착제 잔류지수가 가장 높았다.