• 제목/요약/키워드: resilient modulus test

검색결과 75건 처리시간 0.026초

점성토의 회복탄성계수 추정을 위한 경험식 (Empirical Correlation for the Estimation of Resilient Modulus of Cohesive Soils)

  • 이우진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1994년도 가을 학술발표회 논문집
    • /
    • pp.259-264
    • /
    • 1994
  • The 1986 AASHTO Guide for the Design of Pavement Structures introduced the resilient modulus as a definitive material property to characterize roadbed soil. Although the incorporation of resilient modulus represents a significant acvance in pavement design practice, the test procedure for resilient modulus is complicated and time-consuming. Therefore, it is necessary to develop data base of resilient modulus for the soils frequently encountered; and to develop the reliable correlations between resilient properties and parameters from simple routine tests, In this study, resilient modulus tests were performed on five cohesive soils sampled from in-service subgrades. The stress at 1 percent axial strain in unconfined compression test(su1.0%) was found as a good indicator of the resilient modulus, and unique relationship between Mg and Su1.0% was obtained. A simple chart to estimate the resilient modulus at different levels of confining stress and deviator stress was also developed.

  • PDF

점성토의 회복 및 영구변형 특성 평가 (Evaluation of the Resilient and Permanent Behaviors of Cohesive Soils)

  • 사공명;김대현;최찬용
    • 한국철도학회논문집
    • /
    • 제11권1호
    • /
    • pp.61-68
    • /
    • 2008
  • 교통하중이 작용하는 노반의 응력-변형율 간의 상관성의 특징을 나타내기 위하여 회복탄성계수가 사용되어왔다. 최근 도로의 경우 노반의 설계에 있어 AASHTO에서 제안된 역학적-경험적 설계가이드에 따라 회복탄성계소의 사용이 더욱 권장되는 실정이다. 이에 비해 국내 철도의 노반설계에 있어서는 정적실험 결과인 $K_{30}$이나 변형계수를 사용하고 있는 실정이다. 따라서 철도노반의 설계에 있어 회복탄성계수의 적용 가능성에 대한 평가가 이루어져야 할 것이다. 본 연구에서는 14종의 점성토 흙에 대하여 회복 및 영구변형 특성에 대한 평가를 위하여 기본 물성실험, 일축압축실험 그리고 회복탄성계수 실험을 수행하였다. 또한 일축압축 실험결과와 접선탄성계수, 일축압축강도, 파괴시 변형율 첨두 강도에서의 할선탄성계수와 항복변형율을 바탕으로 회복탄성계수 추정을 위한 예측모델이 제안되었다. 본 연구에서 제안된 예측모델은 실측결과와의 비교시 만족할 만한 값을 보이는 것으로 확인되었다. 다만 회복탄성계수 실험시 발생하는 영구변형에 대해서는 현재 고려하고 있지 않다.

경량혼합토의 도로 노상층 재료 사용 가능성 평가 (Evaluation of Lightweight Soil as a Subgrade Material)

  • 박대욱;보베이트하이
    • 한국도로학회논문집
    • /
    • 제15권5호
    • /
    • pp.57-64
    • /
    • 2013
  • PURPOSES : It is to evaluate lightweight soil as a subgrade material based on mechanical tests and calculation of pavement performance. METHODS : In this research, various contents of cement and air foam are used to make lightweight soil using wasted dredged soil. Uniaxial compressive strength test is conducted to evaluate strength of 7 and 28 day cured specimens. Secant modulus was calculated based on the stress and strain relationship of uniaxial compressive strength test. Resilient modulus test was measured using by repeated triaxial compression test. The measured resilient modulus was used in layered elastic program to predict fatigue and rutting life at a given pavement structure. RESULTS : Uniaxial compressive strength increases as cement content increases but decrease as air foam content increases. Resilient modulus also increases as cement content increases and decrease as air foam content decrease. CONCLUSIONS : It is concluded that dredge clay soil can be used as subgrade layer material using by lightweight treated soil method.

암버력-토사 성토의 회복탄성계수 산정방법 (A Methodology to Determine Resilient Modulus for Crushed Rock-Soil Mixture)

  • 박인범;김성수;정영훈;목영진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.1190-1200
    • /
    • 2010
  • A method was developed to determine resilient modulus for crushed rock-soil mixtures whose usage has been increased recently without engineering specifications. The method is based on the subtle different modulus called nonlinear dynamic modulus and was lately implemented in residual soils and engineered crushed-stones. Hereby. the same method was expanded to crushed rock-soil mixtures containing as large grain diameter as 300mm. The method utilize field direct-arival tests for the determination of maximum Young's modulus, and a large scale free-free resonant column test, which is recently developed to is capable to test as large grain diameter as 25mm, for modulus reduction curves. The prediction model of resilient modulus was evaluated for crushed rock-soil mixtures of a highway construction site at Gimcheon, Korea.

  • PDF

현장탄성계수에 근거한 보조기층 다짐관리방안 연구 (A Study on Establishing the Subbase Compaction Control Method based on the In-situ Elastic modulus)

  • 최준성;김종민;한진석;김부일
    • 한국도로학회논문집
    • /
    • 제13권1호
    • /
    • pp.33-40
    • /
    • 2011
  • 국내에서 일반적으로 보조기층재료로 사용되고 있는 보조기층 다짐재료의 역학적 특성을 반영한 실내 회복탄성계수는 역학적-경험적 포장설계법에서 적용하는 설계 인자이다. 따라서, 역학적-경험적 포장설계법의 보조기층 현장에서 실시하여야 하는 다짐관리는 다짐 후 측정된 현장 탄성계수가 설계에 적용된 실내 회복탄성계수를 만족하는지 여부를 확인하여야 할 것이다. 이를 위하여 본 연구에서는 기존 다짐관리 시험인 들밀도 시험과 평판재하시험(PBT)의 시험결과와 현장탄성계수와의 상관성을 분석하였고, 현장에서 탄성계수를 측정할 수 있는 소형 충격 재하시험(LFWD)을 통한 현장탄성계수와 실내 회복탄성계수와의 상관관계식과 시험간격을 제안하였다. 또한 제안된 상관관계를 이용하여 현장시험을 통한 보조기층의 다짐관리방안을 제안하였다.

흙노반재료의 회복탄성계수(MR) 결정을 위한 반복삼축압축시험법 제시 및 변형계수 상관성 분석 (A Possible Test Method Proposed for Resilient Modulus (MR) and Analysis of Correlation between Resilient Modulus and Shear Modulus of Track Subgrade Soil)

  • 박재범;최찬용;임상진;임유진
    • 한국철도학회논문집
    • /
    • 제20권1호
    • /
    • pp.85-98
    • /
    • 2017
  • 일반적으로 철도궤도 상부노반 흙재료는 연속적인 열차의 동적하중을 받게 되어 증가-감소 단계의 응력을 경험하게 된다. 이와 같이 일정한 주기에 따라 반복적으로 재하되는 축차응력(${\sigma}_d$)과 반복재하회수가 증가하게 되어 발생하는 회복변형률(${\varepsilon}_r$)의 비를 이용, 회복탄성계수($M_R$)을 산정할 수 있다. 현재까지 철도궤도하부구조에 적용할 수 있는 통일된 회복탄성계수 측정 시험법이 제시된 바 없어, 본 연구에서는 철도궤도 하부구조에 적용 가능하며, 구속압, 응력조건 및 반복재하회수 등을 종합적으로 고려할 수 있는 반복삼축압축시험에 의한 잠정 회복탄성계수 측정시험법을 제시하였다. 또한 반복삼축압축시험에 의한 잠정 시험법을 통해 산정된 회복탄성계수($M_R$)와 중형공진주시험을 통해 측정한 전단탄성계수(G)와의 상관성분석을 실시하였다.

대형반복삼축시험에 의한 강화노반 재료의 회복탄성계수 특성 분석 (Characteristics of Resilient Modulus of Reinforced-Roadbed Materials Using Large Repetitive Triaxial Test)

  • 임유진;이진욱;황정규;박미연
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.1115-1122
    • /
    • 2011
  • Reinforced-Roadbed materials are usually composed of crushed stones. Repeated load application can induce deformation in the reinforced-roadbed layer so that it causes irregularity of track. Thus it is important to develop a prediction model of elastic modulus based on stress-strain relation under repeatitive load in order to investigate behavior of reinforced roadbed. The prediction model of elastic modulus of the material can be obtained from repeated triaxial test. However, a proper size of the sample for the test must be used. In this study, a large repeatitive triaxial test apparatus with the sample size of diameter of 30 cm and height of 60cm was adapted for performing test of the crushed stone reinforced-roadbed considering large particle size to get resilient modulus Mr. The obtained resilient modulus was compared to shear modulus obtained from mid size resonant column test. The sample size effect is somewhat large enough so that it is required to design a scale factor based on similarity law in order to use smaller samples for getting elastic modulus of the crushed stone reinforced-roadbed material. A scale factor could be obtained from this study.

  • PDF

농도의 기층 및 보조기층 공법연구 -노상 및 시멘트 안정 처리층의 Mr 특성을 중심으로- (Study on the Base and Subbase Method of Agricultural Road -On the Resilient Modulus Characteristics of the Subgrade and Cement Treated Base-)

  • 도덕현
    • 한국농공학회지
    • /
    • 제31권2호
    • /
    • pp.66-81
    • /
    • 1989
  • The characteristics of resilient modulus(Mr) which dominates the life of pavement and the design of pavement were investigated on the test specimens which were cement treated and non-treated of the three different soil types. The results are summarized as follows : 1. The resilient modulus was decreased by increasing the cyclic deviator stress ($\sigma$d) , especially the resilient modulus was gradually decreased or sometimes increased when the value of ad was greater than 0.75- 1. 0kg/cm$^2$. 2. The resilient modulus was increased by increasing the homogeneous confined stress ($\sigma$do) and such phenomena were distinct on the coarse soils. 3. The resilient modulus was increased by increasing the ratio of confined stress(Kc), and this phenomena were eminent on the coarse soils too, and the higher permanent strain was showed by increasing the value of Kc. 4. In the drained cyclic triaxial compression test, the value of ad, Kc, and (Oho) was introduced by the following interrelated equations which were similar to the Mr model of Cole. Kcn/Mr=K1(J$_2$/ $\tau$oct)K2 ............. (coarse soli) Mcn/Mr=K3($\sigma$dp/ $\tau$f)k4 ...............(fine soils) 5. The stress path was not much affected by the value of Mr, however, moisture content, dry desity, and contant of fines affected the value of Mr. 6. In the soil-cement specimens, the resilient compression strain($\varepsilon$d) was decreased by the increment of the $\sigma$ho, and Mr was decreased by increasing the $\sigma$d 7. In the flexible pavement. the cement treated layer should be designed not to fail by the fatigue before the designed traffic load, and actually the pavement could cover the traffic load to a certain extent under the post-crack phase, therefore farther studies on this phenomena' are required in the design analysis. 8. The finite element computer program (ANALYS) was used for displacement analysis of pavement containing the cement-treated layer, The result showed that the program used for this analysis was proved to be usable.

  • PDF

응력상태와 함수비에 대한 시험도로 노상토의 회복탄성거동 (Effect of Stress State and Moisture Condition on the Resilient Behavior of Subgrade Soils in Test Roads)

  • 박성완;이치헌;황규영
    • 한국도로학회논문집
    • /
    • 제9권1호
    • /
    • pp.47-56
    • /
    • 2007
  • 교통하중하의 포장구조에 대한 설계나 비선형 해석에 있어 도로하부 재료의 회복변형 특성이 활용되고 있다. 그러나 국내에서의 관련 연구가 매우 미진한 실정이다. 또한 매우 제한적인 범위의 자료만이 노상토의 회복탄성계수를 추정하는데 활용되고 있다. 이에 본 논문에서는 시험도로 입상 노상토를 대상으로 비선형 특성을 알아보기 위하여 반복재하 회복탄성계수 시험을 수행하였다. 현장조건을 반영하여 함수비와 응력조건을 고려한 회복탄성계수 구성방정식을 제안하였다. 이를 통하여 응력조건을 고려한 회복탄성계수 예측모델과 적합한 응력의존 모델을 결정하고 계절적인 함수비 변화가 고려된 회복탄성계수 모델을 각각 비교하였다.

  • PDF

세립토의 회복탄성계수(Mr)에 대한 지반물성치의 영향 (Effect of Engineering Properties on Resilient Modulus of Cohesive Soil as Subgrade)

  • 김동규;이주형;황영철;장범수
    • 한국지반공학회논문집
    • /
    • 제29권10호
    • /
    • pp.67-74
    • /
    • 2013
  • 본 연구의 목적은 노상토로 사용되는 세립토의 회복탄성계수($M_r$)에 대한 지반물성치의 영향을 평가하는 것이다. A-6그룹과 A-7-6그룹에 해당하는 8개의 세립토를 도로건설현장의 노상토에서 수집하여 지반물성치를 결정하였다. Atterberg 한계실험, 체분석, 비중계 분석, 다짐실험, 일축압축강도 실험은 세립토의 지반물성치를 결정하기 위해 수행되었다. 각 흙 시료에서 3가지 조건의 함수비(최적함수비보다 낮은 함수비, 최적함수비, 최적함수보다 높은 함수비)를 가진 시편에 대하여 $M_r$실험과 일축압축강도실험을 수행하였다. 세립토의 $M_r$은 함수비에 가장 큰 영향을 받았으며 함수비가 증가할수록 $M_r$은 감소하는 경향을 보였다. 세립토의 $M_r$은 일축압축강도, 점토 함유량, 실트와 점토 함유량, 액성한계, 소성지수가 증가할수록 증가하는 경향을 보였다. 또한, 모래의 함유량이 증가할수록 세립토의 $M_r$은 감소하는 경향을 보였다.