• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.484-490
• /
• 2000

The abjective of the study is the development of the system for effective prediction of residual stresses using the backpropagation algorithm from the neural network. To achieve this goal, the series experiment were carried out and measured the residual stresses using the sectional method. Using the experimental results, the optional control algorithms using a neural network should be developed in order to reduce the effect of the external disturbances on during GMA welding processes. Then the results obtained from this study were compared between the measured and calculated results, the neural network based on backpropagation algorithm might be controlled weld quality. This system can not only help to understand the interaction between the process parameters and residual stress, but also improve the quantity control for welded structures.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.6
• /
• pp.336-341
• /
• 2004

The effect of shot peening conditions on the fatigue properties of heat-treated spring steel has been investigated by using residual stress measurement and metallography. The mechanical properties of material did not change so much by shot peening. However, the fatigue strength and fatigue life increased about 20% to 40% by 1-step and 2-step shot peening process. The fatigue strength and life were closely related to the value and position of maximum compressive residual stress by shot peening process. In the case of warm shot peening, compressive residual stress of specimens shot peening processed at $200^{\circ}C$ was higher than those of specimens shot peening processed at room temperature, $100^{\circ}C$ and $300^{\circ}C$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2341-2348
• /
• 1996

This paper proposes an image compression algorithm that adopts projection scheme on mean-residual metod. Sub-blocks of an image are encoded using mean-residual method where mean value is predicted according to that of neighboring blocks. Projection scheme with 8 directions is applied to the compression of residual signals of blocks. Projection vectors are finite-state vector quantized according to the projection angle of nighboring blocks in order to exploit the correlation among them. Side information to represent the repetition of projection is run-length coded while the information for projection direction is compressed using entropy encoding. The proposed scheme apears to be better in PSNR performance when compared with conventional projection scheme as well as in subjective quality preserving the edges of images better than most tranform methods which usually require heavy computation load.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.194-200
• /
• 1993

Grinding experiments for Al 7075 alloy were carried out to study the influence of grinding conditions and supply methods of grinding fluid on residual stress and surface roughness and grinding force. The residual stress was measured by an X-ray method. The supply method of grinding fluid with a guide nozzle has large decrease value of the tensile residual stress and of grinding force than a normal nozzle. In sparking out state of the grinding work, it is desirable to decrease the depth of cut and the workpiece feedrate for improving surface roughness and mechanical properties.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3301-3303
• /
• 1999

A new method of measuring residual stresses in micromachined films using beam or ring structures is proposed. Using the proposed method, more exact value of residual stress can be obtained without any ambiguities in conventional buckling method. Theoretical modeling with respect to this method is described, and experiment is performed. The structure and fabrication process in this paper are simple and widely used in surface micromachining. Therefore, it is possible to obtain a synchronous measurement. A synchronous and reason -able estimation of residual stresses in micromachined films enables us to obtain the prediction of more exact performance in micromachined devices.

• Transactions of Materials Processing
• /
• v.13 no.6 s.70
• /
• pp.509-514
• /
• 2004

An analysis using FEM simulation was conducted to predict residual stresses and birefringence in simple compressed cylindrical glass as a preliminary part of the optimum design determination of optical lenses. The FEM simulation with the Maxwell viscoelastic constitutive model was used to predict thermal induced residual stresses and birefringence during the compression test considering stress relaxation. Also the linear photoelastic theory was introduced to calculate birefringence from the residual stress state. The error of simulation results between experimental results in the birefringence value at the center of glass specimen is $4.2\%$, and the error in the maximum radius of deformed glass specimen is $1.2\%$. The simulation results were in good agreement with deformation and birefringence distribution in the existing experimental result.

• Journal of Surface Science and Engineering
• /
• v.36 no.6
• /
• pp.475-479
• /
• 2003

In this study, to investigate the effects of 2-step shot peening at the surface of spring steel, tests are conducted on spring steel and shot peened specimens. Various tests are accomplished to evaluate mechanical properties influenced by shot peening process, and fatigue tests are also performed to evaluate the improvement of fatigue strength. And then the residual stresses are examined. The mechanical properties of material did not change so much by shot peening. However, the fatigue strength of notched specimen remarkably increased. In the case of 1-step shot peening, fatigue strength increased by about 20％ than unpeened specimen. Especially, in the case of 2-step shot peening, fatigue strength increased by about 40％, because the residual compressive stress at surface was higher than that of 1-step shot peened specimen. The fatigue strength and life are closely related to the value and position of maximum compressive residual stress by shot peening.

• Korean Journal of Digital Imaging in Medicine
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2014

This study is to increase the accuracy of the diagnosis of benign prostatic hyperplasia by presenting a method that can accurately measure the residual urine amount of the bladder by using an ultrasound image. Agar powder, Propanol and distilled water were used as materials for making a phantom. In order to measure the volume, a $10m{\ell}$ cylinder, syringe and beaker were used. The image was obtained by scanning phantoms produced into six shapes. Each constant value was obtained by using the expression designed to measure the residual urine amount of the bladder and was compared and analyzed. The measuring method of Bladder volume was presented and a constant value for each shape was obtained and five observers measured it five times. According to the results of clinical application, the errors of Ellipse-beanbag, Shield-shield were 11.0%, 18.2%, respectively. Constant values depending on the shape of each phantom were presented in order to accurately measure the volume of the bladder in measuring the amount of residual urine for the diagnosis of benign prostatic hyperplasia. The accuracy of the volume using this was verified statistically(p > 0.05). Therefore, it is considered to be useful in diagnosing benign prostatic hyperplasia by using the ultrasound imaging measuring method presented.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.224-228
• /
• 1989

This study was performed to investigate the content of residual pesticides in bean sprouts which are the very important vegetables to supply protein for traditional korean dishes. Experimental subjects included 541 cases of bean sprouts and 168 cases of germinating beans collected in the Seoul area from January in 1987 to February in 1938. In residual pesticides of subjects, topsin-M, vitavax and thiram were determined by high pressure liquid chromatography and captan was determined by gas chromatography. The detection rates of residual pesticides in the subjects were 19.4% in bean sprouts and 26.2% in germinating beans. The most common used pesticides in bean sprouts was topsin-M and detection rate was 16.2%. Captan and vitavax were also detected in about 3.5%, 2.8% of the experimental subjects respectively. But thiram was not detected in any samples. The mean value of topsin-M content was $21.32{\pm}4.82ppm$ and $1.68{\pm}0.14ppm$ in bean sprouts. The mean value of captan were $7.70{\pm}2.13ppm$ and $0.42{\pm}0.02ppm$ in germinating beans and bean sprouts, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.85-95
• /
• 2007

In this study, in order to propose the prediction method of the residual settlement of clayey ground improved by vertical drains, a series of numerical analyses for a model ground were carried out using the elasto-viscous consolidation model. And the effects of ground improvement conditions of the ratio of effective radii $(r_e/r_w)$, consolidation pressure $({\Delta}p)$ on normally consolidated state, and the OCR (overconsolidation ratio) on overconsolidated state to reduce the residual settlement in three-dimensional consolidation by vertical drains were investigated by performing a series of numerical analyses. Furthermore, based on the results of a series of numerical analyses for the model ground, the predicting method of the residual settlement of clayey ground with vertical drains and the determination method of the value of OCR required to control the residual settlement within an acceptable value are proposed.