• Journal of Gastric Cancer
• /
• v.20 no.3
• /
• pp.233-244
• /
• 2020

Purpose: For unresectable or initially metastatic gastric cancer, conversion surgery (CVS), after systemic chemotherapy, has received attention as a treatment strategy. This study evaluated the prognostic value of ypTNM stage and the oncologic outcomes in patients receiving CVS. Materials and Methods: A retrospective review of clinicopathologic findings and oncologic outcomes of 116 patients who underwent CVS with curative intent, after combination chemotherapy, between January 2000 and December 2015, has been reported here. Results: Twenty-six patients (22.4%) underwent combined resection of another organ and 12 patients received para-aortic lymphadenectomy (10.3%). Pathologic complete remission (CR) was confirmed in 11 cases (9.5%). The median overall survival (OS) and disease-free survival (DFS) times were 35.0 and 21.3 months, respectively. In multivariate analysis, ypTNM stage was the sole independent prognostic factor for DFS (P=0.042). Tumors invading an adjacent organ or involving distant lymph nodes showed better survival than those with peritoneal seeding or solid organ metastasis (P=0.084). Kaplan-Meier curves showed that the 3-year OS rate of patients with pathologic CR and those with CR of the primary tumor but residual node metastasis was 81.8% and 80.0%, respectively. OS was 65.8% for stage 1 patients, 49.8% for those at stage 2, and 36.3% for those at stage 3. Conclusions: The ypTNM staging is a significant prognostic factor in patients who underwent CVS for localized unresectable or stage IV gastric cancers. Patients with locally advanced but unresectable lesions or with tumors with distant nodal metastasis may be good candidates for CVS.

• Journal of Industrial Technology
• /
• v.36
• /
• pp.71-76
• /
• 2016

In this study, we determined the precise coordinates of TBMs (Tidal Bench Marks), which used as the national reference points in coastal area of Korea, using a GPS data analysis SW for the academic and scientific applications, GAMIT/GLOBK. For accurate 3-D positioning of TBM locations, we performed the GPS point surveying according to the national surveying policy and also acquired the GPS data for 48 TBMs located in the western and southern coastal part of Korea. Considering the results of baseline analysis to each observation session obtained from GAMIT module, the baseline analysis was realized to be done precisely because the values of Normalized RMS (NRMS) were mostly less than ${\pm}0.20mm$. Before the network adjustment using GLOBK module, we evaluated the suitability of observations for each session by applying the chi-squared test (${\chi}^2$ test) to the degree of freedom in observed session. An overall distributions of ${\chi}^2$ test were less than 1.0 for all sessions, and the statistical of ${\chi}^2$ test showed the average, 0.267 with minimum and maximum value, 0.063 and 0.653, respectively. Finally, we analyzed the network adjustment for 48 TBMs to reduce the residuals of baseline analysis on each point by connecting with 42 permanent GPS stations in Korea. In the network adjustment procedure, we set up the weighted values of each permanent station to be allocated between 0.9 and 1.14, and also removed the observed points having residual exceeds 4-times of standard deviation ($4{\sigma}$).

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.13-21
• /
• 2005

Advanced analysis and optimal design of steel arch bridges is presented. In the design method using an advanced analysis, separate member capacity checks after analysis are not required because the stability and strength of the structural system and its component members can be rigorously treated in the analysis. The geometric nonlinearity is considered by using the stability function. The Column Research Council tangent modulus is used to account for gradual yielding due to residual stresses. A parabolic function is used to represent the transition from elastic to zero stiffness associated with a developing hinge. An optimization technique used is a modified section increment method. The member with the largest unit value evaluated by AASHTO-LRFD interaction equation is replaced one by one with an adjacent larger member selected in the database. The objective function is taken as the weight of the steel arch bridge and the constraint functions account for load-carrying capacities and deflection requirements. Member sizes determined by the proposed method are compared with those given by other approaches.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.89-93
• /
• 1985

In order to develop the nutrient material for growing plants, tobacco leaf debris (T.L.D) that is a residual product of cigarette processing was carbonated at about 50% of its weight and neutralized its alkalinity by nitric and phosphoric acid. This material ($T.L.D+3N-HNO_3+1N-H_3PO_4$ (10:1:1), as a consequence, contained 4.1% of nitrogen, 2.1% of phosphte, and 6.6% of potassium in value of about pH 7. It was very effective on seedling growth to apply 1 Kg of nutrient material per 110 1 of bed soil as basic dressing because of containing not only quick-acting nitrate but also slow-releasing organo-nitrogen and sufficient potassium.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.241-247
• /
• 2016

The tracking filter plays a key role in the accurate estimation and prediction of maneuvering a vessel's position and velocity when attempting to enhance safety by avoiding collision. Therefore, in order to achieve accurate estimation and prediction, many oceangoing vessels are equipped with the Automatic Radar Plotting Aid (ARPA) system. However, the accuracy of prediction depends on the tracking filter's ability to reduce noise and maintain a stable transient response. The purpose of this paper is to derive the optimal values of the gain parameters used in tracking a High Dynamic Warship. The algorithm employs a ${\alpha}-{\beta}-{\gamma}$ filter to provide accurate estimates and updates of the state variables, that is, positions, velocity and acceleration of the high dynamic warship based on previously observed values. In this study, the filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization of the damping parameter, ${\xi}$, is achieved experimentally by plotting the residual error against different values of the damping parameter to determine the least value of the damping parameter that results in the optimum smoothing coefficients leading to a reduction in the noise corruption effect. Further investigation of the performance of the filter indicates that optimal smoothing coefficients depend on the initial and average velocity of the target.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.56.1-56.1
• /
• 2013

Supernovae type Ia (SNe Ia) cosmology is providing the only direct evidence for the presence of dark energy. This result is based on the assumption that the look-back time evolution of SNe Ia luminosity, after light-curve shape correction, would be negligible. However, the most recent compilation of SNe Ia data shows systematic difference in the Hubble residual (HR) between the E and Sd/Irr galaxies, indicating that the light-curve fitters used by the SNe Ia community cannot quite correct for a large portion of the population age effect. In order to investigate this possibility more directly, we have obtained low-resolution spectra for 30 nearby early-type host galaxies. This data set is used to estimate the luminosity-weighted mean ages and metallicities of host galaxies by employing the population synthesis models. We found an interesting trend between the host galaxy age and HR, in the sense that younger galaxies have positive residuals (i.e., light-curve corrected SNe Ia luminosity is fainter). This result is rather independent of the choice of the population synthesis models employed. Taken at face value, this age (evolution) effect can mimic a large fraction of the HR used in the discovery of the dark energy. This result is significant at 1.4 - 3 sigma levels, depending on the light curve fitters adopted, and further observations and analyses are certainly required to confirm the trend reported here.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.146-153
• /
• 2006

A performance test of the stainless steel based sintered metal filter was conducted on the low and intermediate level radioactive waste (LILW) vitrification process. The applicability of the metal filter was based on the test results as well. The baseline pressure drop of the metal filter was evaluated similar to the ceramic filter. During the test, when the flow rate of off-gas was $110Nm^{3}/h$, the total baseline pressure drop was shown as $92mmH_{2}O$. The total pressure drop was attributed to the filter media and the residual dust layer and the value of each was $25mmH_{2}O\;and\;67mmH_{2}O$ respectively. The SEM-EDS spectrum and micrograph of the metal filter specimen showed, no corrosion and no physical damage both at the skin membrane and at the support layer. And most of the baseline pressure drop was caused by the deposition of dust on the surface of the membrane. In conclusion, even though the filter exposure time was short at the test, the performance of the stainless steel based metal filter was acceptable for the treatment of LILW vitrification process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.380-386
• /
• 2002

Damage behaviors induced in silicon carbide by an impact of particle having different material and size were investigated. Especially, the influence of the impact velocity of particle on the cone crack shape developed was mainly discussed. The damage induced by spherical impact was different depending on the material and size of particles. Ring cracks on the surface of specimen were multiplied by increasing the impact velocity of particle. The steel particle impact produced larger ring cracks than that of SiC particle. In the case of high velocity impact of SiC particle, radial cracks were produced due to the inelastic deformation at the impact site. In the case of the larger particle impact, the damage morphology developed was similar to the case of smaller particle one, but a percussion cone was farmed from the back surface of specimen when the impact velocity exceeded a critical value. The zenithal angle of cone cracks developed into SiC material decreased monotonically with increasing of the particle impact velocity. The size and material of particle influenced more or less on the extent of cone crack shape. An empirical equation, $\theta$= $\theta$$\sub$st/, v$\sub$p/(90-$\theta$$\sub$st/)/500 R$\^$0.3/($\rho$$_1$/$\rho$$_2$)$\^$$\frac{1}{2}$/, was obtained as a function of impact velocity of the particle, based on the quasi-static zenithal angle of cone crack. It is expected that the empirical equation will be helpful to the computational simulation of residual strength in ceramic components damaged by the particle impact.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.469-479
• /
• 2015

This study have been conducted to analyze the feasibility of establishing Contamination Warning System(CWS) that is capable of monitoring early natural or intentional water quality accidents, and providing active and quick responses for domestic C_water supply system. In order to evaluate the water quality data set, pH, turbidity and free residual chlorine concentration data were collected and each statistical value(mean, variation, range) was calculated, then the seasonal variability of those were analyzed using the independent t-test. From the results of analyzing the distribution of outliers in the measurement data using a high-pass filter, it could be confirmed that a lot of lower outliers appeared due to data missing. In addition, linear filter model based on autoregressive model(AR(1) and AR(2)) was applied for the state estimation of each water quality data set. From the results of analyzing the variability of the autocorrelation coefficient structure according to the change of window size(6hours~48hours), at least the window size longer than 12hours should be necessary for estimating the state of water quality data satisfactorily.