• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.901-903
• /
• 1998

Crosslinked Degree is an important factor to determine dielectric property of crosslinked polyethylene(XLPE) used for the insulation material in power cables. Recently, though it is necessary to investigate electrical properties according to crosslinked degree as a part of the whole characterization of cable. it is not examined closely. In this study, crosslinked degree of samples were measured according to temperature and holding time of crosslinking, electrical tree characteristics of these samples were analyzed by crosslinked degree and applied temperature that was changed from normal temperature to operating temperature of power cables. As a result. when the crosslinked degree was low, dielectric properties were decreased and influence of temperature was increased. but the crosslinked degrees were high. initiation voltages of treeing were increased and dielectric properties were improved. It is proved that the optimum. crosslinked degree was one of most important factor for aging time and residual lifetime of power cable.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.136-140
• /
• 2000

It is desirable to predict springback quantitatively and accurately for the tool and process design in sheet stamping operations, however, it is blown very difficult. The result of springback analysis by the finite element method is sensitively influenced by numerical factors such as blank element size, number of integration point, punch velocity, contact algorithm etc. In the present work, a parametric study by Taguchi method is performed in order to evaluate the influence of numerical factors on springback Quantitatively and to obtain the combination of numerical factors which yields the best approximation to experimental data. Since springback is determined by the residual stress after forming process, it is important to evaluate stress distribution accurately. The oscillation in the time history curve of stress obtained by explicit FEM says that the stress solution at termination time is in very unstable state. Therefore, a variability study is also carried out in this study in order to assess the stability of implicit springback analysis starting from the stress solution by explicit forming simulation. The 2D draw bending process, one of the NUMISHEET '93 benchmark problems, is adopted as an application model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.182-187
• /
• 2015

In the three-phase power system, when any one-phase or two-phases is open-phase, the unbalanced current flows and the single-phase power supplies to three-phase loads. Specially, motor coil and transformer coil receive over-current. As a result, great damage as well as electrical fire can occur to the power system. In order to improve these problems, this paper proposes that an open-phase detection device is designed by a new algorithm using electric potential difference between the resultant voltage of neutral point and ground, and a control circuit topology of open-phase protector is composed of highly efficient semiconductor devices. It improves response speed and reliability. The control algorithm circuit also operates the cut-off of a conventional residual current protective device (RCD) which flows an enforced leakage current to ground wire at open-phase accident. Furthermore, time delay circuit is added to prevent the incapable operation of open-phase protector about instantaneous open-phase not open-phase fault. The time delay circuit improves more reliability.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.539-544
• /
• 2003

The purpose of this study is to research source of soil which is available for non-detergent course, and to develop optimum non-detergent course of washing machine for water soluble soil. The water soluble soil such as grape juice, soy bean paste and soy sauce were easily removed from the fabric but the oil soluble soils such as sesame oil and steak sauce were insurfficiently removed in washing solution without detergent. In the absence of detergent, amount of residual soils increased linearly with increasing number of soiling and washing. To search optimum conditions of washing for non-detergent course, the effect of temperature, washing time and washing method on detergency of soil in non-detergent washing solution was examined. The optimum washing temperature and washing time for non-detergent course were about $40^{\circ}C$, and 7 minutes, respectively. And in the non-detergent washing solution, midterm drain-resupply of water during washing process was good for removal of water soluble soil.

• Smart Structures and Systems
• /
• v.26 no.1
• /
• pp.23-33
• /
• 2020

Majority of the damage in engineering structures is nonlinear. Damage sensitive features (DSFs) extracted by traditional methods from linear time series models cannot effectively handle nonlinearity induced by structural damage. A new DSF is proposed based on vector space cosine similarity (VSCS), which combines K-means cluster analysis and Bayesian discrimination to detect nonlinear structural damage. A reference autoregressive moving average (ARMA) model is built based on measured acceleration data. This study first considers an existing DSF, residual standard deviation (RSD). The DSF is further advanced using the VSCS, and then the advanced VSCS is classified using K-means cluster analysis and Bayes discriminant analysis, respectively. The performance of the proposed approach is then verified using experimental data from a three-story shear building structure, and compared with the results of existing RSD. It is demonstrated that combining the linear ARMA model and the advanced VSCS, with cluster analysis and Bayes discriminant analysis, respectively, is an effective approach for detection of nonlinear damage. This approach improves the reliability and accuracy of the nonlinear damage detection using the linear model and significantly reduces the computational cost. The results indicate that the proposed approach is potential to be a promising damage detection technique.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.421-433
• /
• 2002

This study was conducted to develope a simple, rapid and solvent-free solid-phase microextraction(SPME) procedure for extracting three organochlorine, one triazine and nine organophosphorus pesticides from water. The optimal conditions of SPME for analyses of organochlorine pesticides were obtained at $250^{\circ}C$ of desorption temperature, 45 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber and those of triazine and organophosphorus pesticides were obtained at $270^{\circ}C$ of desorption temperature, 60 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber. This method showed good lineality for organochlorine pesticides between 0.0001 and $10{\mu}g/L$ with regression coefficients ranging 0.9986~0.9992 and for triazine and organophosphorus pesticides between 0.01 and $10{\mu}g/L$ with regression coefficients ranging 0.9867~0.9998.

• Journal of fish pathology
• /
• v.26 no.1
• /
• pp.45-50
• /
• 2013

Enrofloxacin is one of the normally used flouroquinolones in mammalian and fish but its withdrawal time and studies were remain obscure. The residual contents of enrofloxacin in fish muscle were analyzed by using HPLC-FLD. More than 0.1 mg/kg of ENR was detected in muscle tissues and the residues were found over 1 year after treatment. The concentration of ENR in Paralichthys olivaceus was not affected by water temperature and lasted for an extended amount of time. The spike recoveries of ENR in the muscle tissue ranged from 78% to 85%. From this results, we need the prescription by veterinarian or aquatic organism disease inspector in ENR usage to assure safety of fish. Future research is required to determine the recommendation dose of ENR for side effects and safety.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.4
• /
• pp.243-249
• /
• 2016

Energy-harvesting nodes in wireless sensor networks(WSNs) can be exhausted due to a heavy workload even though they can harvest energy from their environment. On contrast, they can sometimes fully charged, thus waste the harvested energy due to the limited battery-capacity. In order to utilize the harvested energy efficiently, we introduce a selective data compression and transmission range control scheme for energy-harvesting nodes. In this scheme, if the residual energy of a node is expected to run over the battery capacity, the node spends the surplus energy to exploit the data compression or the transmission range expansion; these operations can reduce the burden of intermediate nodes at the expanse of its own energy. Otherwise, the node performs only basic operations such as sensing or transmitting so as to avoid its blackout time. Simulation result verifies that the proposed scheme gathers more data with fewer number of blackout nodes than other schemes by consuming energy efficiently.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.127-130
• /
• 2011

We investigated the effects of $O_2$ annealing (i.e., temperature and time) on the characteristics of hafnium silicate ($HfSi_xO_y$) films deposited on a Si substrate by atomic layer deposition process (ALD). We found that the post deposition annealing under oxidizing ambient causes the oxidation of residual Hf metal components, resulting in the improvement of electrical characteristics (e.g., hysteresis window and leakage current are decreased). In addition, we observed the annealing temperature is more important than the annealing time for post deposition annealing. Based on these observations, we suggest that post deposition annealing under oxidizing ambient is necessary to improve the electrical characteristics of $HfSi_xO_y$ films deposited by ALD. However, the annealing temperature has to be carefully controlled to minimize the regrowth of interfacial oxide, which degrades the value of equivalent oxide thickness.