• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1423-1428
• /
• 2011

This paper proposes a learning input shaper with nonlinear actuator dynamics to reduce the residual vibration of flexible systems. The controller is composed of an estimator of the time constant of the nonlinear actuator dynamics, a recursive least squares method, and an iterative updating algorithm. The updating mechanism is modified by introducing a vibration measurement function to cope with the dynamics of nonlinear actuators. The controller is numerically evaluated with respect to parameter convergence and control performance by using a benchmark pendulum system. The feasibility and applicability of the controller are demonstrated by comparing its control performance to that of an existing controller algorithm.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.434-442
• /
• 2015

The advanced passive pressurized water reactor (PWR) is being constructed in China and the passive residual heat removal (PRHR) system was designed to remove the decay heat. During accident scenarios with increase of heat removal from the primary coolant system, the actuation of the PRHR will enhance the cooldown of the primary coolant system. There is a risk of power excursion during the cooldown of the primary coolant system. Therefore, it is necessary to analyze the thermal hydraulic behavior of the reactor coolant system (RCS) at this condition. The advanced passive PWR model, including major components in the RCS, is built by SCDAP/RELAP5 code. The thermal hydraulic behavior of the core is studied for two typical accident sequences with PRHR actuation to investigate the core cooling capability with conservative assumptions, a main steam line break (MSLB) event and inadvertent opening of a steam generator (SG) safety valve event. The results show that the core is ultimately shut down by the boric acid solution delivered by Core Makeup Tank (CMT) injections. The effects of CMT boric acid concentration and the activation delay time on accident consequences are analyzed for MSLB, which shows that there is no consequential damage to the fuel or reactor coolant system in the selected conditions.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.293-297
• /
• 2000

Multiseeding with (100)/(100) grain junctions of top-seeded melt growth (TSMG) processed YBCO superconductors was studied. The effect of the number of seeds and the distance between two seeds on the levitation forces and the trapped magnetic fields of the TSMG-processed YBCO samples was investigated. Multiple seeding shortened the processing time for the fabrication of TSMC-processed YBCO superconductors. The large magnetic field was trapped at the grain junction when two seeds was placed without spacing, while the amount of the magnetic field decreased when the seed distance increased. This is attributed to the increased amount of the residual melt phases around the grain junctions.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.65-72
• /
• 1992

Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.486-493
• /
• 1997

Experimental investigations on the comparison of developments between transient jets and evolving jet diffusion flames have been made in initial injection period. To achieve this experiment, an ignition technique using a residual flame as the ignition source is devised. High speed Schlieren visualizations, and measurements including jet tip penetration velocities and jet widths of the primary vortex are employed to examine the developing processes for several flow conditions. It is seen that the developing behaviors in the presence of flame are greatly different from those in transient jet, and thus the flow characteristics in the transient part are also modified. The discernible differences are shown to consist of the delay of the rollup of the primary vortex, the faster spreading after the rollup due to exothermic expansion, and the survival of only a primary vortex. The growth of primary vortex in the transient jet is properly explained through an impulsively started laminar vortex prior to the interaction. It is also found that the jet tip penetration velocity varies with elapsed time and an increase in Res gives rise to a higher tip penetration velocity.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.411-420
• /
• 2020

Numbers fitting-curve equations have been proposed to predict soil-water retention curve (SWRC) whose parameters have no definitude physical meaning. And these methods with precondition of measuring SWRC data is time-consuming. A simplified directly method to estimate SWRC without parameters obtained by fitting-curve is proposed. Firstly, the total SWRC can be discretized into linear segments respectively. Every segment can be represented by linear formulation and every turning point can be determined by the pore-size distribution (PSD) of Mercury Intrusion Porosimetry (MIP) tests. The pore diameters governing the air-entry condition (AEC) and residual condition (RC) can be determined by the PSDs of MIP test. The PSD changes significantly during drying in SWR test, so the determination of AEC and RC should use the PSD under corresponding suction conditions. Every parameter in proposed equations can be determined directly by PSD without curve-fitting procedure and has definitude physical meaning. The proposed equations give a good estimation of both unimodal and bimodal SWRCs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.289-290
• /
• 2005

We have investigated the electro-optical (EO) performances of the flexible liquid crystal display (LCD) on twisted nematic (TN) mode according to variation of cell gap in comparison with glass LCD. There were four kinds of cells which were having cell gaps of 3$\mu$m, 4$\mu$m and 5$\mu$m, especially the lowest 2$\mu$m on flexible and glass substrates separately. The EO performances of the flexible cells on the rubbed potyimide (PI) were almost the same those of glass cells. The response time of flexible cells was shorter than that of glass cells but the alignment of liquid crystal (LC) of flexible cells was weaker than that of glass cells. The residual DC of flexible cells was on the increase like that of glass cells in compliance with lowering cell gap.

• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.181-188
• /
• 2001

We describe here the Korea ocean prediction system that closely resembles operational numerical weather prediction systems. This prediction system will be served for real-time forecasts. The core of the system is a three-dimensional primitive equation numerical circulation model, based on ${\sigma}$-coordinate. Remotely sensed multi-channel sea surface temperature (MCSST) is imposed at the surface. Residual subsurface temperature is assimilated through the relationship between vertical temperature structure function and residual of sea surface height (RSSH) using an optimal interpolation scheme. A unified grid system, named as [K-E-Y], that covers the entire seas around Korea is used. We present and compare hindcasting results during 1990-1999 from a model forced by MCSST without incorporating RSSH data assimilation and the one with both MCSST and RSSH assimilated. The data assimilation is applied only in the East Sea, hence the comparison focuses principally on the mesoscale features prevalent in the East Sea. It is shown that the model with the data assimilation exhibits considerable skill in simulating both the permanent and transient mesoscale features in the East Sea.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.133-138
• /
• 2005

The deformation of sheet metal due to the residual stress during blanking or piercing process, is numerically simulated by means of a commercial finite element code. Two dimensional plain strain problem is solved and then its result is applied to the deformation analysis of the lead frame. The plain strain element is applied to the 2D problem to observe the Von Mises equivalent stress concentration at the both shearing edges. As the punch penetrates into the sheet material, the stress concentration generated on both edges is getting increased to be the shearing surface. The limits of the punching depth applied to the simulation is 16% and 24% of the sheet thickness for the plain strain element and the hexahedral element, respectively. The hexahedral element and the limit of punching depth were applied to the deformation analysis of the lead frame for the blanking process. The FEM results for the lead deformation were very good agreement with the experimental ones. This paper shows that the coarse mesh has enabled to analyze the lead deformation generated due to the blanking mechanism. This simple approach to save the calculation time will be very effective to the design of the blanking tools in industries.

• Journal of Chest Surgery
• /
• v.14 no.3
• /
• pp.187-194
• /
• 1981

Cardiac surgery is generally followed by a period of routine ventilator support. When the patient seems hemodynamically stable and relatively alert following surgery, respiratory adequacy is tested by the weaning trial. In this study, physiological and clinical prediction of postoperative respiratory adequacy, including values of pulmonary function tests, were examined in an attempt to identity those few variables which predicted the outcome of the ventilator weaning trial following surgery. Our series comprised 27 patients who underwent elective open intracardiac operations at the Department of Thoracic and Cardiovascular Surgery, School of Medicine, Kyungpook National University, from October 1979 to July, 1980. The pulmonary function tests performed on all patients included the following; forced vital capacity [FVC], forced expiratory volume [FEV1.0], forced expiratory flow [FEF 25--75~], residual volume [RV], and functional residual capacity [FRC], measured with a helium dilution technique. Of our 27 patients, 8 were successfully weaned within 20 hours of operation. All patients with cyanotic heart diseases or acquired heart diseases were unsuccessfully weaned. The bypass time in the successful weaning group was shorter in the mean value [82.8 minutes]than in the unsuccessful weaning group [120.5 minutes]. There was a relatively significant difference in the mean values for the two groups in arterial pressure, bleeding amounts and FiO2 among the postoperative monitoring variables, and in forced vital capacity [FVC]. The postoperative clinical assessments appeared vague but corresponded reasonably well to appraisal of success in weaning, especially in variables of cough and self-respiration efforts.