• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.63-70
• /
• 2016

The distributed systems managed by K-water were surveyed to study the characteristic of disinfection-by-product (Trihalomethans & Haloacetic acids) formation and the correlations between the concentrations of disinfection-by-product and physico-chemical parameters. Five distribted system were selected according to their water ages and the degree of deterioration of their pipelines. Total seven items including Trihalomethans (THMs), Haloacetic acids (HAAs), BDOC, DOC, pH, chlorine residual, and temperature were analysed in monthly basis. The concentration of organic matter were increased according to water age and pipeline deterioration in this study. The coefficient of determination between the decline of residual chlorine and the increase of water age was revealed as high. Also, the coefficient of determination between the decline rate of residual chlorine and the increase of the Trihalomethans concentration were studied as high. Furthermore the longer water age is the bigger the effect on Trihalomethans formation and temperature. However, the coefficient of determination between the concentraion of Haloacetic acid and water age, residual chlorine, and temperature were revealed as low in this study.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.685-692
• /
• 2012

Injection molding operation consists of phases of filling, packing, and cooling. The highest cavity pressure is involved in the packing phase among the operation phases. Thus the cavity pressure largely depends upon velocity to pressure (v/p) switchover timing and magnitude of packing pressure. Developed cavity pressure is directly related to stress concentration in the cavity of mold and it may cause a crack in the mold. Consequently control of cavity pressure is considered very important. In this study, cavity pressure was analyzed in terms of v/p switchover timing and packing pressure through computer simulation and experiment. Cavity pressure was increased as the v/p switchover timing was delayed. Residual pressure after cooling phase was observed when the v/p switchover timing was late, which was due to increased pressurizing time for long filling phase. Cavity pressure was increased proportionally with the packing pressure. Residual pressure after cooling phase was also observed, and it was increased with increasing packing pressure. High cavity pressure and residual pressure have been observed at late v/p switchover and high packing pressure. Compared with simulation and experimental results, the profiles of pressures were very similar however simulation could not predict residual pressure. Packing condition was important for the control of cavity pressure and the optimum condition could be set up using CAE analysis.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.219-226
• /
• 2006

The shortest path is only maintained during short time because network topology changes very frequently and each mobile nodes communicate each other by depending on battery in MANET(Mobile Ad-hoc Network). So many researches that are to overcome a limitation or consider a power have executed actively by many researcher. But these protocols are considered only one side of link stability or power consumption so we can make high of stability but power consumption isn't efficient. And also we can reduce power consumption of network but the protocol can't make power consumption of balancing. For that reason we suggest RBSSPR(Residual Battery Capacity and Signal Strength Based Power-aware Routing Protocol in MANET). The RBSSPR considers residual capacity of battery and signal strength so it keeps not only a load balancing but also minimizing of power consumption. The RBSSPR is based on AODV(Ad-hoc On-demand Distance Vector Routing). We use ns-2 for simulation. This simulation result shows that RBSSPR can extense lifetime of network through distribution of traffic that is centralized into special node and reducing of power consumption.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.67-72
• /
• 2005

To achieve demineralization of crab shell waste by chemical and biological treatments, lactic acid and lactic acid bacterium were applied. In 5.0 and $10\%$ lactic acid, pH rapidly decreased from 6.8 to 4.2 and from 4.5 to 2.4 at day 3, respectively, and thereafter the pH remained at an almost constant level. In a $10\%$ lactic acid bacterium inoculum, pH lowered to 4.6 at day 5. Relative residual ash content rapidly decreased to 49.1 and $16.4\%$ in 5 and $10\%$ lactic acid treatments, respectively, for the initial 12 h. In 2.5, 5 and $10\%$ lactic acid bacterium inoculums, relative residual ash content rapidly decreased to 55.2, 40.9 and $44.7\%$, respectively, on the first day. Residual dry masses were 76.4, 67.8 and $46.6\%$ in 2.5, 5 and $10\%$ lactic acid treatments, respectively, for the initial 12 h. After a one-time exchange of the lactic acid solution, in the $5.0\%$ lactic acid treatment, residual dry mass rapidly decreased from 66.0 to $41.4\%$. In 2.5, 5 and $10\%$ lactic acid bacterium inoculums, residual dry masses decreased to 67.6, 57.4 and $59.6\%$ respectively, on the first day. Protein contents after demineralization ranged from $51.3{\sim}54.7\%$ in the chemical treatments and decreased to $32.3\%$ in the lactic acid fermentation process. A negative relationship was shown between pH and demineralization rate in lactic acid and lactic acid bacterium treatments. These results suggest that lactic acid fermentation can be an alternative for demineralization of crab shells, even though the rate and efficiency of the demineralization is lower than the chemical treatment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.324-338
• /
• 2015

Analytical solutions for interaction between seabed and waves such as progressive wave or partial standing wave with arbitrary reflection ratio or standing wave have been developed by many researchers including Lee et al.(2014; 2015a; 2015b; 2015c; 2015d) and Yamamoto et al.(1978). They handled the pore-water pressure as oscillating pore-water pressure and residual pore-water pressure separately and discussed the seabed response on each pore-water pressure. However, based on field observations and laboratory experiments, the oscillating and residual pore-water pressures in the seabed do occur not separately but together at the same time. Therefore, the pore-water pressure should be investigated from a total pore-water pressure point of view. Thus, in this paper, the wave-induced seabed response including liquefaction depth was discussed among oscillating, residual, and total pore-water pressures' point of view according to the variation of wave, seabed, and flow conditions. From the results, in the field of flow with the same direction of progressive wave, the following seabed response has been identified; with increase of flow velocity, the dimensionless oscillating pore-water pressure increases, but the dimensionless residual pore-water pressure decreases, and consequently the dimensionless total pore-water pressure and the dimensionless liquefaction depth decrease.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.302-307
• /
• 2012

This study was carried out to elucidate residual characteristics of environment friendly agricultural material rotenone in chilli pepper and calculate processing factors by drying. The test material was sprayed twice onto chilli peppers at an interval of seven days and then the chilli peppers were harvested at 0, 1, 3, 5 and 7 days after final spray. Limits of quantitation (LOQs) of rotenone in fresh and dried chilli peppers were 0.03 and 0.07 mg/kg, respectively. Recoveries of the test material in fresh and dried chilli peppers ranged from 89.52 to 97.86% and from 85.76 to 91.61%, respectively. As a results of residual material analysis, amounts of rotenone in fresh and dried chilli peppers ranged from 0.03 to 0.39 mg/kg and from 0.07 to 0.75 mg/kg, respectively, representing that the residual amounts of rotenone decreased time-coursely. Processing factors of rotenone in fresh chilli pepper by drying were found to be from 2.03 to 3.13, indicating that the residual concentration of rotenone in dried chilli pepper increased from two to three times by drying. However, the reduction factor of rotenone in fresh chilli pepper by drying ranged from 0.38 to 0.59, representing that some of rotenone in fresh chilli pepper disappeared during the drying process.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.461-467
• /
• 2011

The objective of this study was to determine the shelf-life effects and residual nitrite contents of mugwort and pine needle extracts addition in emulsified sausage during cold storage. The sausages were of five types: no mugwort and pine needle extracts added (Control), mugwort water extract added (T1), mugwort ethanol extract added (T2), pine needle water extract added (T3), and pine needle ethanol extract added (T4). Each sausage type was tested in triplicate and assigned to one of four storage periods: 0, 10, 20 and 30 days. As storage time increased, the presence of mugwort and pine needle extracts resulted in decreased pH, CIE $L^*$, and residual nitrite value, but increased TBARS (thiobarbituric acid reactive substance) values, and total plate counts (TPC). Values for pH, TBARS, residual nitrite contents and total plate counts were significantly decreased by the addition of mugwort and pine needle extracts compared to the control (P<0.05). Among all treatments, T4 was more (P<0.05) effective in delaying lipid oxidation compared to other treatment groups. In conclusion, this study demonstrates that addition of pine needle ethanol extract to emulsified sausages tended to improve antioxidant and antimicrobial effects and residual nitrite contents during storage than other treatment groups.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2022

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were used as carbon precursors. The physicochemical characteristics of petroleum-based residual oil were confirmed through Matrix-assisted laser desorption/ionization Time-of-Flight (MALDI-TOF) and elemental analysis (EA), and the structural characteristics of anode materials manufactured from residual oil were evaluated using X-ray crystallography (XRD) and Raman spectroscopic techniques. VR was found to contain a wide range of molecular weight distributions and large amounts of impurities compared to PFO and FCC-DO, and PFO and FCC-DO exhibited almost similar physicochemical characteristics. From the XRD analysis results, carbonized PFO and FCC-DO showed similar d₀₀₂ values. However, it was confirmed that FCC-DO had a more developed layered structure than PFO in Lc (Length of a and c axes in the crystal system) and La values. In addition, FCC-DO showed the best cycle characteristics in electrochemical characteristics evaluation. According to the physicochemical and electrochemical results of the petroleum-based residual oil, FCC-DO is a better carbon precursor for a lithium secondary battery than PFO and VR.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.701-707
• /
• 2023

In PET/CT, the injection volume of ¹⁸F-FDG directly affects the SUV(standard uptake value), which can affect the reading results. Therefore, it is important to inject the correct dose value of ¹⁸F-FDG. In this study, we performed the correlation between the residual radioactivity remaining in the syringe and catheter insertion device according to the number of flushing during ¹⁸F-FDG injection. CRC-25R dose calibrator, catheter insertion devices, 3 cc syringes and 50 cc physiological saline were used in this study, and the results were statistically analyzed. As a result, the total residual radioactivity of the syringe and catheter insertion device remained the highest at 5.84% after two flushing, and the least remained at 1.49% after five flushing. The correlation analysis results showed that the number of flushing had a negative correlation with the residual radioactivity of the syringe at -0.436 and the catheter insertion device at -0.300. As a result of one-way distributed analysis of the average according to the number of flushing, the syringe showed a significant decrease at 4 times, and the catheter insertion device showed a significant decrease at 5 times. However, considering that an average of 0.8% remains in the case of catheter insertion devices, four time flushing seems to be the most appropriate.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.16-22
• /
• 2024

Polymer electrolyte membrane fuel cells have the advantage of low operating temperatures and fast startup and response characteristics compared to others. Simulation studies are actively researched because their cost and time benefits. In this study, the resistance of water residual in the gas diffusion layer (GDL) of the unit cell was added to the existing equation to compare the actual data with the model data. The experiments were conducted with a 25 cm² unit cell, and the samples were separated into stopping times of 0, 10, and 60 minutes following primary impedance measurement, activation, and polarization curve data acquisition. This gives 0, 10, and 60 minutes for the residual water in the GDL to evaporate. Without the rest period, the magnitude of the performance improvement was not significantly different at the same potential and flow rate, but the rest period did improve the performance of the membrane electrode assembly when measuring impedance. By changing the magnitude of the resistance reduction to an overvoltage, the voltage difference between the fuel cell model with and without residual water was compared, and the error rate in the high current density region, which is dominated by concentration losses, was reduced.