• 제목/요약/키워드: residual time

Search Result 2,098, Processing Time 0.03 seconds

Performance Analysis of Coding According to the Interpolation filter in Inter layer Intra Prediction of H.264/SVC (H.264/SVC의 계층간 화면내 예측에서 보간법에 따른 부호화 성능 분석)

  • Gil, Dae-Nam;Cheong, Cha-Keon
    • Proceedings of the IEEK Conference
    • /
    • 2009.05a
    • /
    • pp.225-227
    • /
    • 2009
  • International standard specification, H.264/SVC improved from H.264/AVC, is set up so as to promote free use of huge multimedia data in various channel environments.;H.264/AVC is a international standard speicification for video compression, adopted and commercialized as standard for DMB broadcasting by JVT of ISO/IEC MPEG and ITU-T VCEG. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding. Among prediction technologies, 'inter-layer intra prediction' is to use co-located block of up sampled sublevels as a prediction signal. At this time, application of interpolation is one of the most important factors to determine encoding efficiency. SVC's currently using poly-phase FIR filter of 4-tap and 2-tap respectively to luma components. This paper is written for the purpose of analyzing encoding performance according to the interpolation. For this purpose, we applied poly-phase FIR filter of '2-tap', '4-tap' and '6-tap' respectively to luma components and then measured bit-rate, PNSR and running time of interpolation filter. We're expecting that the analysis results of this paper will be utilized for effective application of interpolation filter. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding.

  • PDF

Design, Analysis and Implementation of Energy-efficient Broadcast MAC Protocols for Wireless Sensor Networks

  • Kang, Young-Myoung;Lim, Sang-Soon;Yoo, Joon;Kim, Chong-Kwon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.5 no.6
    • /
    • pp.1113-1132
    • /
    • 2011
  • In wireless sensor networks (WSNs), most energy saving asynchronous MAC protocols are custom tailored for unicast communications only. However, broadcast protocols are very commonly used in WSNs for a variety of functionalities, such as gathering network topology information, event monitoring and query processing. In this paper, we propose a novel low-power asynchronous broadcast MAC protocol called Alarm Broadcast (A-CAST). A-CAST employs the strobe preamble that specifies the residual waiting time for the following data transmission. Each receiver goes back to sleep upon hearing the strobe preamble for the residual time duration, to conserve energy and to wake up just before data transmission starts. We compute the energy consumption of A-CAST via rigorous mathematical analysis. The analytic results show that A-CAST outperforms B-CAST, a simple broadcast extension of the well-known B-MAC. We also implement A-CAST on sensor motes and evaluated its performance through real experiments. Our experimental results show that A-CAST reduces the energy consumption by up to 222% compared to the previously proposed protocols.

Real-Time Detection of Residual Free Chlorine and pH in Water Using a Microchannel Device

  • Kim, Sam-Hwan;Choi, Ju-Chan;Lee, June-Kyoo;Kong, Seong-Ho
    • Journal of Sensor Science and Technology
    • /
    • v.20 no.6
    • /
    • pp.368-374
    • /
    • 2011
  • A microfluidic device for real-time monitoring of residual free chlorine and pH in water based on optical absorption is proposed. The device consists of a serpentine micromixer for mixing samples with a reagent, and a photodiode and light emitting diode(LED) for the detection of light absorbance at specific wavelengths, determined for specific reagent combinations. Spectral analyses of the samples mixed with N, N'-diethyl-p-phenylenediamine(DPD) reagent for chlorine determination and bromothymol blue(BTB) for pH measurement are performed, and the wavelengths providing the most useful linear changes in absorbance with chlorine concentration and pH are determined and used to select the combination of LED and photodiode wavelengths for each analyte. In tests using standard solutions, the device is shown to give highly reproducible results, demonstrating the feasibility of the device for the inexpensive and continuous monitoring of water quality parameters with very low reagent consumption.

Food Safety Assurance of Imported Agricultural Products (수입 농산물의 식품 안전성 관리 현황)

  • Oh, Chang-Hwan
    • Journal of agricultural medicine and community health
    • /
    • v.31 no.1
    • /
    • pp.63-79
    • /
    • 2006
  • Korea's self-sufficient food ratio on a quantity basis remained a low 27.6 per cent for cereals in year 2004. Even the public auction of imported rice from the United States kicked off a couple of days ago to allow foreign rice to be sold directly to consumers on the Korea market for the first time. Therefore the safety of imported food must be a great concern of Korean consumers. All imported agricultural products are supposed to be quarantined for controlling the insect and inspected for the potent risk like residual pesticides, aflatoxin, sulfur dioxide and genetically modified. agricultural products. The 12 percent of agricultural products contained the insects detected by National Plant Quarantine was fumigated with methyl bromide or aluminum phosphide and entered the custom. The most large portion of violated agricultural products (24 cases in 2004) inspected by Korea Food and Drug Administration was dried herbal medicinal foods contaminated by sulfur dioxide which must be treated when they were dried in China. The second factor made the imported agricultural products to be criminals (19 cases in 2004) was residual pesticides. Genetically modified agricultural products like soybean and corn are under control by labelling in Korea. Genetically modified soybean and corn have been used for oil expression mostly. It is the time to set up realistic risk assessment system for our consumer with the pouring imported agricultural products.

  • PDF

Decomposition of Organic Matters by Ozonation in Advanced Water Treatment Process (고도정수처리공정에서 오존의 유기물 분해능)

  • Yoon Taekyung;Lee Gangchoon;Noh Byeongjil
    • Journal of Environmental Science International
    • /
    • v.14 no.3
    • /
    • pp.327-333
    • /
    • 2005
  • The performance of ozone contactor in ozone-BAC advanced water treatment process was evaluated by the degree of decomposition of organic matters. The degree was measured by the analyses of $UV_{254}$ absorbance and the concentrations of DOC and BDOC for the sand filtered water and the ozone treated water, respectively. In addition, the ozone concentration in the contactor, required for the maximum BDOC concentration, was selected as the optimum concentration, and the appropriate residential time of ozone treated water in a reservoir was recommended based on the residual ozone concentration in the treated water. The following results were obtained from the pilot scale experiments. By ozonation $UV_{254}$ absorbance was decreased, and BDOC concentration was increased. The change of DOC concentration by ozonation was negligible, but the excess input of ozone resulted in the removal of the small amount of BDOC by complete oxidation. The optimum ozone concentration was 0.58mg $O_3/mg$ DOC. In order to remove residual ozone, 20minutes of the residential time were enough after ozonation.

The Effect of Cryoprotectants on the Properties of Pacific Sand Lance Ammodytes personatus Girard Surimi During Frozen Storage

  • Yoo, Byung-Jin
    • Fisheries and Aquatic Sciences
    • /
    • v.17 no.3
    • /
    • pp.291-298
    • /
    • 2014
  • We investigate the effects of cryoprotectant mixtures on the quality of sand lance surimi (SLS) during storage at $-30^{\circ}C$. We monitored freeze-induced denaturation of myofibrillar protein in SLS and examined the texture profile of SLS gel. Freeze-induced denaturation was assessed by evaluating SLS $Ca^{+2}$-ATPase activity. SLS gels prepared with sorbitol or sucrose and a mixture of both as cryoprotectant. Higher concentrations of cryoprotectants resulted in significantly higher residual SLS $Ca^{+2}$-ATPase activity at the same storage time (P < 0.05). Residual $Ca^{2+}$-ATPase activity of SLS prepared with sorbitol was higher than that of sucrose when cryoprotectant concentration and storage period were same. A blend of sorbitol and sucrose resulted in a stronger cryoprptective effect of SLS myofibrillar protein than did sorbitol or sucrose alone. The presence of a phosphate compound in SOP (3% sorbitol + 0.2% phosphate compound) resulted in higher SLS $Ca^{2+}$-ATPase activity than that of did 5% sorbitol. The hardness, brittleness, and elasticity values and a folding test of the SLS gels were significantly affected by cryoprotectant concentrations and the storage time. Preference scores and acceptance for texture in a sensory evaluation of the SLS gels increased with increasing sorbitol or sucrose concentration.

Numerical Assessment for Coastal Water Purification Utilizing a Tidal Jet System (조석분류를 이용한 연안해역의 수질정화에 관한 수치적 평가)

  • Park, Jong-Chun
    • Journal of Ocean Engineering and Technology
    • /
    • v.20 no.4 s.71
    • /
    • pp.58-63
    • /
    • 2006
  • When the costal zone surrounded by a breakwater has a narrow vertical opening, currents in the vicinity of a narrow entrance can result in a jet flow, coinciding with the tide. Such a Tidal-Jet Generator(TJG) can change the water mass distribution and transport processes in the domain of influence of the jet. Also, it can decrease the residual time of them. In the present study, the water purification utilizing tidal jets in the coastal zone over constant bathymetry are estimated numerically, using a finite-difference numerical scheme, named the NS-MAC-TIDE method, which isbased on the fully 3D Navier-stokes(NS) equations. The shear velocity near the inlet of the TJG are predicted from the flow field simulation, and are assessed qualitatively with the development of scouring or sediment that is caused by the change of diffusion or sweeping flowup from the seabed of sediment particles. Finally, through solving a transport equation of concentration, the residual time related on mass transport processes and the flushing mechanism for water purification are investigated.

The Effects Influencing Soil Adsorption by various Chemical Compounds (다양한 화합물이 토양의 흡착 거동에 미치는 영향)

  • Ahn, Jong-Pil;Park, Sang-Bum;Ahn, Ki-Mun;Heo, Hong-Kyun
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2008.10a
    • /
    • pp.1098-1108
    • /
    • 2008
  • Batch type and column type experiments were performed in order to predict adsorption and movement within soil. Clay minerals montmorillonite and kaolinite were respectively added to paraquat which is a cationic compound with long residual time, 2,4-D which is an anionic compound with relatively short residual time and napropamide which is an amphoteric compound. Therefore, it is very important to determine the movements of toxic pollutants in the ground soil to establish measures to prevent soil grounds contamination and to restore contaminated soils effectively, because contamination of soil is getting severe due to these toxic wastes, industrial waste water, and agricultural chemicals, etc. Therefore, in this study, we have carried out column and batch experiments by using general toxic organic compounds as test samples in order to restore contaminated soils effectively as well as to prepare a basic data to develop absorbents that will remove various toxic organic compounds, with a grandiose purpose to prevent contaminations of soil and grounds due to various toxic organic compounds.

  • PDF

A Study of the Characteristics on the Vacuum Interrupter with Axial Magnetic Field Type using 3 Dimension Finite Element Analysis (3차원 유한요소해석을 이용한 종자게형 진공 인터럽터의 특성고찰)

  • 하덕용;강형부
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.5
    • /
    • pp.460-467
    • /
    • 2002
  • This paper deals with the distribution characteristics of the current density and axial magnetic flux density on the vacuum interrupter with axial magnetic field type using 3 dimension finite element analysis. An axial magnetic field parallel to the current flow in the arc column can improve the current breaking capacity of vacuum interrupter by affecting the arc mode. The axial magnetic flux density on the contact electrode surface is analyzed by inputting external current as a function of the transient time for sine half wave. And it also is analyzed within the gap distance of the contact electrode. The peak value of current but is decreased with the descending current on the contact electrode surface and within the gap distance of the contact electrode. The residual magnetic field is generated on the contact electrode surface and within the gap distance in the instant of zero current, which is due to the influence of eddy currents. The phase shift due to eddy currents, defined as time difference between the maximum value of current and axial magnetic field, is about 1ms in the center point of gap distance.

Analyzing Position-Domain Hatch Filter for Real-Time Kinematic Differential GNSS (실시간 동적 차분 위성항법을 위한 위치영역 Hatch 필터의 성능 해석)

  • Lee, Hyeong-Geun;Ji, Gyu-In;Rizos, C.
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.34 no.2
    • /
    • pp.48-55
    • /
    • 2006
  • Performance characteristics of the position-domain Hatch filter is analyzed for differential global navigation satellite systems. It is shown that the position-domain Hatch filter generates white measurement residual sequences, which is beneficial property for fault detection. It is also shown that the position-domain Hatch filter yields more accurate a priori state estimate than the position-domain Kalman-type filter. Thus, it can be concluded that the position-domain Hatch filter is beneficial in wide application areas where fault-tolerance and accuracy are required at the same time.