• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.859-869
• /
• 1995

The present study is to understand the physical phenomena anticipated during the accident with RHR loss under mid-loop operation in a PWR and, at the same time, to examine the prediction capability of RELAP5/MOD3.1 on such an accident, by simulating an integral test relevant to this accident for reliable analysis in an actual PWR. The selected experiment, i.g. BETHSY Test 6.9a, represents the configuration with the pressurizer manway open and steam generators unavailable during the accident. Accordingly, the results of this ok are sure to contribute to understanding both the key events as well as the sensitive parameters, anticipated in the accident, for validity of the actual analysis. In the simulation result overall behavior as well as major phenomena observed in the experiment have been predicted reasonably by RELAP5/MOD3.1, however, the problem associated with enormous computing time .due to small time step size has been encountered. Besides, the code prediction of higher swollen level in the pressure vessel has given rise to overestimation of both pressurizer level and RCS pressure. Subsequently, overprediction of the break flow through the manway has led to earlier core uncovery than that in the experiment by about 400 seconds. As a whole, it is demonstrated from both the experiment and the analysis that gravity feed has not been sufficient to recover the core level and thus additional forced feed has been necessary in this configuration.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.524-533
• /
• 2008

Industrial wastewater generated in the electroplating and metal finishing industries typically contain toxic free and complex metal cyanide with various heavy metals. Alkaline chlorination, the normal treatment method destroys only free cyanide, not complex metal cyanide. A novel treatment method has been developed which destroys both free and complex metal cyanide as compared with Practical Plant(I). Prior to the removal of complex metal cyanide by Fe/Zn coprecipitation and removal of others(Cu, Ni), Chromium is reduced from the hexavalent to the trivalent form by Sodium bisulfite(NaHSO$_3$), followed by alkaline-chlorination for the cyanide destruction. The maximum removal efficiency of chromium by reduction was found to be 99.92% under pH 2.0, ORP 250 mV for 0.5 hours. The removal efficiency of complex metal cyanide was max. 98.24%(residual CN: 4.50 mg/L) in pH 9.5, 240 rpm with 3.0 $\times$ 10$^{-4}$ mol of FeSO$_4$/ZnCl$_2$ for 0.5 hours. The removal efficiency of Cu, Ni using both hydroxide and sulfide precipitation was found to be max. 99.9% as Cu in 3.0 mol of Na$_2$S and 93.86% as Ni in 4.0 mol of Na$_2$S under pH 9.0$\sim$10.0, 240 rpm for 0.5 hours. The concentration of residual CN by alkaline-chlorination was 0.21 mg/L(removal efficiencies: 95.33%) under the following conditions; 1st Oxidation : pH 10.0, ORP 350 mV, reaction time 0.5 hours, 2nd Oxidation : pH 8.0, ORP 650 mV, reaction time 0.5 hours. It is important to note that the removal of free and complex metal cyanide from the electroplating wastewater should be employed by chromium reduction, Fe/Zn coprecipitation and, sulfide precipitation, followed by alkaline-chlorination for the Korean permissible limit of wastewater discharge, where the better results could be found as compared to the preceding paper as indicated in practical treatment(I).

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.93-102
• /
• 2016

Vehicle-to-Grid (V2G) system, bi-direction power trading technology, enables drivers possessing electric vehicle to sell the spare electricity charged in the vehicle to power distribution company. The drivers gain profit by charging electricity in the day time of high electricity rate. In this regard, the government is preparing the policies of building and supporting V2G infrastructure and demanding the potential consumers' preference for the V2G system. This paper attempts to analyze the consumers' preference using the data from obtained a survey of randomly selected 1,000 individuals. To this end, choice experiment, an economic technique, is employed here. The attributes considered in the study are residual amount of electricity, electricity trading hours, required plug-in time, and price measured as an amount additional to current gasoline vehicle price. The multinomial logit model, which requires the assumption of 'independence of irrelevant alternatives', is applied but the assumption could not be satisfied in our data. Thus, we finally utilized nested logit model which does not require the assumption. All the parameter estimates in the utility function are statistically significant at the 10% level. The estimation results show that the marginal willingness to pay (MWTP) for one hour increase in electricity trading hours is estimated to be KRW 1,601,057. On the other hand, a one percent reduction in residual amount of electricity and one hour reduction in required plug-in time in V2G system are computed to be KRW -91,911 and -470,619, respectively. The findings can provide policy makers with useful information for decision-making about introducing and managing V2G system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.102-108
• /
• 2006

It is very important to improve fertilizer use efficiency for the saving of fertilizers and for environmental purposes as well. However, there was no effective ways for the fertilization in the mid of growth under the plastic film mulching cultivation so far. For this, a Band Spotty Fertilization (BSF) machine was developed recently. So, we tried to establish a low input fertilization technique using this BSF machine in the vinyl mulching cultivation of onion (Allium cepa L.). Fertilization efficiency, soil properties, and crop yield were examined and compared among treatments from 2000 to 2001. The content of exchangeable K in soils were higher after fertilization but that of available $P_2O_5$ was lower than before the experiment in all plots. The content of nitrate-N was highest at the early growth stage, and higher in BSF plots than that of conventional fertilization (CF). BSF plot showed higher growth rate, and uptake amount of nitrogen of onion by 59-69% than that of CF. N use efficiency in BSF was higher in the order of two time-split application, one time-split application, and three time application. K use efficiency was high 13-17% BSF plots than that in CF($63kg\;ha^{-1}$) plots. The amount of residual N in soils was high by 8-14% in BSF plots compared to that in CF plots, and the loss of N was lowered 26-34% by BSF. Also, the amount of residual K in soils was high by 13-18% and the loss of K was low by 29-31% in BSF plots compared to that in CF plots. The yield of onions increased by 7-13% by BSF due to increased diameter and weight of bulbs. As the results, N fertilization efficiency increased by 22-42% by BSF.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.43-57
• /
• 1977

In order to establish methods of potato processing for mixed cooking with rice as main diet, treatment for polyphenol oxidase inactivation in potato tissues, and safety in regard to sanitation were studied. The results were summarized as follows: 1. Cut potato granule which were blanched in boiling water are practical and best in color within $3{\sim}6\;minutes$ dipping. 2. Dipping treatment of potato granules in a saline solution is not pratical because of the resulting color and saline taste. 3. Dipping treatment of potato granules in a boiling saline solution is not practical because of residual salt. 4. Dipping treatment of potato granules in low concentration of hydrochloric acid solution is not effective in color changes but dipping treatment from 0.1N concentration for 4-10 minutes to 0.5N concentration for $1{\sim}10minutes$ shows good effects. 5. Dipping treatment in boiling hydrochloric acid solution of 0.04-0.068N concentration for 3-5 minutes dipping is practical for its resulting color. 6. Dipping treatments in 0.05% of $K_2S_20_5$ solution for $50{\sim}60\;minutes$ and in 0.06% for $40{\sim}60\;minutes$ and 0.065% for $10{\sim}60\;minutes$ shows a small palatability in color but its boiled potato granules shows good color 7. Treatments for any time in $0.01{\sim}0.03%$ of boiling $K_2K_20_5$ solution after predipping in its cold solution for longer time than 30minutes show effective in the color and palatability of the potato granules and their cooked ones. 8. From the view of food sanitation, dipping treatment of the potato granules in the solution of $K_2S_20_5$ is safe because of the few residual amount of $SO_2$. 9. All the methods of treatment that potato granules are dipped for any time at 0.01% of $K_2S_20_5$ solution are safe from the view of fond sanitation. At 0.03% of $K_2S_20_5$ solution, nothing but the methods of treatment that they are dipped within 30 minutes and boiled within 4 minutes are safe.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.421-430
• /
• 2004

The purpose of this study was to measure and compare the amount of unreacted TEGDMA from pit and fissure sealants cured with three different light sources; conventional halogen light curing unit, plasma arc light curing unit and argon laser. The specimens were eluted in distilled water for different time intervals. The time-related release of TEGDMA were analyzed by reverse-phase high performance liquid chromatography(HPLC). The result of present study can be summarized as follows: 1. The time-related release of TEGDMA decreased with increasing curing time in conventional halogen light, however, that not statistically significant difference(p>0.05). 2. The elution from the specimens cured for 6 and 9 seconds with plasma arc light was similar results corresponding with the time-related TEGBMA release, and was significantly lower than that cured for 3 seconds(p<0.05). 3. The elution of TEGDMA from the specimens cured with argon laser was significantly higher than that cured with halogen and plasma arc light(p<0.05). 4. The elution of TEGDMA from under recommended time of three different light sources were showed to be no statistically significant difference(p>0.05). 5. In time-related release of TEGDMA from recommended time of each light sources, the results correspond to 40 seconds of halogen light and 6 seconds of plasma arc light were similar(p>0.05). 6. The elution of TEGDMA, from over recommended time of three different light sources were showed to be no statistically significant difference(p>0.05). In this study, I suggest that curing time of plasma arc light is 6 and/or 9 seconds in the field of clinical pediatric dentistry claiming its effectiveness in optimal polymerization and reduced chair time.

• Korean journal of food and cookery science
• /
• v.17 no.6
• /
• pp.583-588
• /
• 2001

In this study, the differences in the contents of vitamin C and minerals in perilla leaves were compared according to the age of leaf and storage conditions. The content of vitamin C in perilla leaves the younger the perilla leaves, the higher the content of vitamin C: Vitamin C content of mature leaf at the lowest part of the stem was 63.7mg/100g, and that of young leaf at the top of the stem was 129.0mg/100g. However, the contents of Ca and Fe by the leaf age were in an opposite tendency with vitamin C: Ca content of the leaves at the lowest and the top part of the stem were 449.4 mg and 311.8mg/100g, respectively. But, the contents of Na and Mg were poor in mature leaf, and the content of K showed no particular difference according to leaf age. When stored at 5$^{\circ}C$, residual rate of vitamin C content was 92.56, 81.52 and 77.05%, after stored 1, 5 and 10 days, respectively. In the case of 20$^{\circ}C$, residual rate of vitamin C was 85.80, 79.90 and 72.53%, respectively. When stored at 5$^{\circ}C$, Ca content in perilla leaves was in the range of 348.93∼408.81mg/100g, and at 20$^{\circ}C$, the content of Ca was 360.26∼392.25mg/100g. Storage time and temperature did not make a significant difference in the mineral content of perilla leaves.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.307-321
• /
• 2016

Planetary Boundary Layer Height (PBLH) is a major input parameter for weather forecasting and atmosphere diffusion models. In order to estimate the sub-grid scale variability of PBLH, we need to monitor PBLH data with high spatio-temporal resolution. Accordingly, we introduce a LIdar observation VEhicle (LIVE), and analyze PBLH derived from the lidar loaded in LIVE. PBLH estimated from LIVE shows high correlations with those estimated from both WRF model ($R^2=0.68$) and radiosonde ($R^2=0.72$). However, PBLH from lidar tend to be overestimated in comparison with those from both WRF and radiosonde because lidar appears to detect height of Residual Layer (RL) as PBLH which is overall below near the overlap height (< 300 m). PBLH from lidar with 10 min time resolution shows typical diurnal variation since it grows up after sunrise and reaches the maximum after 2 hours of sun culmination. The average growth rate of PBLH during the analysis period (2014/06/26 ~ 30) is 1.79 (-2.9 ~ 5.7) m $min^{-1}$. In addition, the lidar signal measured from moving LIVE shows that there is very low noise in comparison with that from the stationary observation. The PBLH from LIVE is 1065 m, similar to the value (1150 m) derived from the radiosonde launched at Sokcho. This study suggests that LIVE can observe continuous and reliable PBLH with high resolution in both stationary and mobile systems.

• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.429-440
• /
• 2014

Since the World Trade Center and Pentagon attacks in 2001, terror, military attack, or man-made disaster caused impact, explosion, and fire accident have frequently occured on civil infrastructures. However, structural behavior researches on major Prestressed Concrete (PSC) infrastructures such as bridges, tunnels, Prestressed Concrete Containment Vessel (PCCVs), and LNG tanks under extreme loading are significantly lacking. Especially, researches on possible secondary fire scenarios after terror, bombing, collision of vehicles and vessels on concrete structures have not been performed domestically where most of the past researches related to extreme loadings on structures focused on an independent isolated extreme loading scenario. Due to the outcry of public concerns and anxiety of potential terrorist attacks on major infrastructures and structures, a study is urgently needed at this time. Therefore, in this study, the bi-directional prestressed concrete $1400{\times}1000{\times}300mm$ panels applied with 430 kN prestressing force using unbonded prestressing thread bars were experimentally evaluated under impact, fire, and impact-fire combined loadings. Due to test site restrictions, impact tests were performed with 14 kN impactor with drop heights of 10m and 3.5 m to evaluate impact resistance capacity. Also, fire and impact-fire combined loading were tested using RABT fire loading curve. The measured residual strength capacities of PSC and RC specimens applied with impact, fire, impact-fire combined loadings were compared with the residual strength capacity of undamaged PSC and RC specimens for evaluation. The study results can be used as basic research data for related research areas such as protective design and numerical simulation under extreme loading scenarios.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.25-30
• /
• 1978

Field experiments were conducted on the cropping system soybean-barley-soybean to investigate the effect of phosphorus and wollastonite application, effective application methods of phosphrus, and their residual effect in a typical Jeju island volcanic ash soil when the fertilizers were applied to the first crop of the three crops sequence. The results are summarized as follows. 1. Response of phosphorus was higher for barley than for soybean. The maximum application rate of phosphate was extimated to be 10-20kg/l0a for cultivation of soybean first crop) and 100kg/l0a for barley (second crop). Barley yield under 100kg/l0a of phosphate was double as compared to the no phosphate plot. 2. With application of 100kg/10a phosphate at the sowing time of soybean, the available phosphate in the soil after harvesting of soybean was increased to 175ppm but decreased to 60 ppm by cultivation of barley (second crop.) On the other hand, the phosphate absorption coefficient was 1,146mg/100g after soybean harvest but increased to 1,764mg/100g after barley harvest. 3. High residual effect was found in the plot to which phosphate applied with compost in the sowing band. 4. Response to wollastonite under heavy application of phosphate was high and residual effect was also great. 5. Response of soybean to wollastonite was higher than that of barley. Application of wollastonite increased the yield of all three crops soybean (first crop) by 30%, barley (second crop) by 12% and soybean (third) by 20%, respectively. Highest yield was obtained from the 1,000kg/10a wollastonite treatment for soybean and 500kg/l0a for barley.