• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.144-149
• /
• 2003

Carbon tips were grown on Si cantilevers by applying an electron beam to them directly with Scanning Electron Microscope. A carbon tip was fabricated by aligning the electron beam directly down the vertical axis of Si cantilever and then irradiating a single spot on the cantilever for a proper time in the dominant atmosphere of residual gases generated by the oil of the diffusion pump. A number of control parameters for SEM, including exposure time, acceleration voltage, emission current, and beam probe current, were allowed to make various aspect ratio feature. The growth of carbon tips was not affected by the surface morphology of substrates. We could acquired the tip whose effective length is 0.5 $\mu\textrm{m}$, bottom diameter is 90 nm and cone half angle $3.5^{\circ}$ The growth technique of the high aspect ratio carbon tips on the tip-free cantilevers is available to reduce the complexities of fabricating sub-micron scale tips on the PZT thin film actuator integrated AFM cantilevers.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.407-414
• /
• 2007

Using the MPI (Moldflow Plastics Insight) software from Moldflow Co., the optimum conditions for producing the upper part of the automobile air cleaner were obtained for 20% talc filled polypropylene (PP). The analysis was carried out to solve the cracking problem between upper and lower parts and the improved process was proposed using the flow balance. The comparative results between the conventional process, CASE-1, with one-pin gate and the new process (CASE-2) comprising two-pin gate system are the followings. In the case of CASE-2, the shorter filling time and reduced cycle time induced an improved production and processibility. In addition, the orientation and volumetric shrinkage are similar to those observed in the lower part, but the assembly, deformation, and physical characteristics are enhanced. The problem induced by the CASE-1 did not originate from the residual stress, but from the difference in the size of the upper part air cleaner after shrinkage. Thus, the orientation problem was expected to improve by optimizing the gate structure.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.5-12
• /
• 2006

This study was conducted to investigate the effect of operational parameters such as dosage of magnesium and phosphate, pH, reaction time and existence crystal core for the removal of nitrogen and phosphorus in anaerobic fermentation supernatant by struvite crystallization. Optimal mole ratio of $Mg^{2+}:NH_4{^+}:PO_4{^{3-}}$ was 1.2:1.0:1.2. Under the optimal molar ratio, removal ratio and reaction rate constant of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ were 79.2, 96.8%, 0.157 and $0.344min^{-1}$, respectively. Optimal pH and reaction time were 11 and 10 minutes, respectively, in the optimal molar ratio. Residual concentration of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ showed lowest value with 1 g/L of crystal core addition. SEM analysis of struvite crystallization with crystal core showed higher crystal core growth than that of without crystal core. Struvite precipitate proved to be orthorhomic crystal structure by XRD analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2016

In this paper, we propose a inverse synthetic aperture radar(ISAR) rotational motion compensation(RMC) method to remove residual blurring caused by non-uniform rotational motion of a target. First, a range bin having an isolated scatterer is selected. Next, polynomial phase signal in the selected range bin is estimated by using both Fourier transform(FT) and polynomial-phase transform(PPT). Finally, a new slow time variable that uniformly samples radar signal along the aspect angle directions is defined by using the estimated phase signal, and we interpolate radar signal in terms of the new time variable. As a result, rotational motion to blurr ISAR images is removed, and focused ISAR images are obtained. Simulation results using battleship model validate the robustness and effectiveness of our proposed RMC method.

• Solar Energy
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1998

A 5 ton/day pilot scale two-phase anaerobic digester was constructed and tasted to treat Korean food wastes in Anyang city. The process was developed based on 3 years of lab-scale experimental results on am optimim treatment method for the recovery of biogas and humus. Problems related to food waste are ever Increasing quantity among municipal solid wastes(MSW) and high moisture and salt contents. Thus our food waste produces large amounts of leachate and bed odor in landfill sites which are being exhausted. The easily degradable presorted food waste was efficiently treated in the two-phase anaerobic digestion process. The waste contained in plastic bags was shredded and then screened for the removal of inert material such as fabrics and plastics, and subsequently put into the two-stage reactors. Heavy and light inerts such as bones, shells, spoons and plastic pieces were again removed by gravity differences. The residual organic component was effectively hydrolyzed and acidified in the first reactor with 5 days space time at pH of about 6.5. The second, methanization reactor part of which is filled with anaerobic fillters, converted the acids into methane with pH between 7.4 to 7.8. The space time for the second reactor was 15 days. The effluent from the second reactor was recycled to the first reactor to provide alkalinities. The process showed stable steady state operation with the maximum organic rate of 7.9 $kgVS/m^3day$ and the volatile solid reduction efficiency of about 70%. The total of 3.6 tons presorted MSW containing 2.9 tons of food organic was treated to produce about $230m^3$ of biogas with 70% of methane and 80kg humus. This process is extended to full scale treating 15 tons of food waste a day in Euiwang city and the produced biogas is utilized for the heating/cooling of adjacent buildings.

• Corrosion Science and Technology
• /
• v.11 no.1
• /
• pp.9-14
• /
• 2012

The formation of the Fe-Al inhibition layer in hot-dip galvanizing is a confusing issue for a long time. This study presents a characterization result on the inhibition layer formed on C-Mn-Cr and C-Mn-Si dual-phase steels after a short time galvanizing. The samples were annealed at $800^{\circ}C$ for 60 s in $N_{2}$-10% $H_{2}$ atmosphere with a dew point of $-30^{\circ}C$, and were then galvanized in a bath containing 0.2 %Al. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) was employed for characterization. The TEM electron diffraction shows that only $Fe_{2}Al_{5}$ intermetallic phase was formed. No orientation relationship between the $Fe_{2}Al_{5}$ phase and the steel substrate could be identified. Two peaks of Al 2p photoelectrons, one from metallic aluminum and the other from $Al^{3+}$ ions, were detected in the inhibition layer, indicating that the layer is in fact a mixture of $Fe_{2}Al_{5}$ and $Al_{2}O_{3}$. TEM/EDS analysis verifies the existence of $Al_{2}O_{3}$ in the boundaries of $Fe_{2}Al_{5}$ grains. The nucleation of $Fe_{2}Al_{5}$ and the reduction of the surface oxide probably proceeded concurrently on galvanizing, and the residual oxides prohibited the heteroepitaxial growth of $Fe_{2}Al_{5}$.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.710-715
• /
• 1997

Inactivation of lipoxygenase activity in Chinese cabbage was shown after salting and heat treatments. Crude lipoxygenase was obtained from treatment of $(NH_{4})_{2}SO_{4}$. Lipoxygenase activity in Chinese cabbage was about 50% after 20 hrs of salting in 13% (w/v) concentration. After heating at $90^{\circ}C$ for 15 min, residual activity of lipoxygenase was about 50%. Inactivation of lipoxygenase was highly accelerated by increasing temperature and heating time. Decimal reduction time (D-value) were 42, 20 and 14 min at 70, 80 and $90^{\circ}C$, respectively. When cabbage was soaked in 0.05 M $CaCl_{2}$ and heated at $55^{\circ}C$ for 1.5 hr, higher activity of crude lipoxygenase was found compared with the heat treatment without $CaCl_{2}$.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.692-698
• /
• 2009

Wavelet transform has been widely used in terms that it may overcome the shortcoming of conventional Fourier transform. Fourier transform has its difficulty to explain how the transformed domain, frequency, is related with time. Traditional semblance technique in Fourier transform was devised to compare two time series on the basis of their phase as a function of frequency. But this method is known not to work well for the non-stationary signal. In this study, we present two applications of the wavelet-based semblance method to geophysical data. Firstly, we show filtered geomagnetic signal remained with components of high correlation to each observatory. Secondly, highly correlated residual signal of gravity and magnetic survey data, which are also filtered by this semblance method, is present.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2012

The linear and decision-feedback equalization can mitigate time-varying intersymbol interference (ISI) caused by time-varying multipath propagation for underwater acoustic channels. The perfect elimination of interference components, however, is difficult using the linear equalization and the decision feedback equalizer has an error propagation problem. To overcome these shortcomings, this paper proposes an equalizer mode selection method using training sequences. The proposed method selects an equalization mode corresponding to the signal-to-noise ratio (SNR). If the SNR is low, the proposed system operates the linear equalizer for preventing the error propagation and if the SNR is high, the decision feedback equalizer for eliminating the residual ISI. Therefore, the proposed method can improve the error performance compared to the conventional equalizers. The computer simulation shows the proposed method improves the bit error performance using practical underwater channels responses acquired from the sea experiment.