• Annual Conference of KIPS
• /
• 2000.04a
• /
• pp.1129-1132
• /
• 2000

최근의 정보기술 발달로 지리 정보의 이용 영역이 점점 확대되고 있다. 특히 지리정보 시스템은 토지, 도시 및 지역, 시설물 관리, 교통, 환경, 자원, 기상 및 국방정보를 비롯하여 수송 및 배달, 공익사업 등 다양한 분야에 활용도가 풍부하다[1][4]. 본 논문은 가스 잔류량 원격 탐지용 송.수신 제어부와의 인터페이스 기능을 갖는 연결보드와 이 보드를 통해 들어오는 수용가(고객)의 사용검침정보를 GIS(Geography Information System)과 통합하여 통계자료 분석 및 보고서를 발행하고, 사용에 따른 실시간 저장소 위치정보를 실시간으로 모니터링 및 사용자 관리할 수 있는 원격 관제시스템을 개발했다. 현재 가스 공급자들이 겪고있는 어려움 중의 하나는 노동력에 의한 가스 잔류량을 수시로 검침하고 검침량에 따라 수금을 하고 있다. 본 시스템의 개발로서 원격에서 가스 잔류랑 검침 및 가스탱크 교환시기, 고객관리 및 고지서 발행과 GIS를 이용한 재충전 또는 교환할 가스탱크의 위치 및 시기를 쉽게 파악하고 긴급 상황에 따른 조치를 신속하게 취할 수 있다. 그리고 가스저장소 실 시간관제, 저장소의 현황분석을 통한 가스 공급자의 관리업무에 대한 효율성을 도모한다.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1261-1270
• /
• 2009

Fifty hydrocarbon-metabolizing microorganisms were isolated from soil samples polluted by the petroleum oils in Gamman-dong, Busan. Among them, strain 2-3A, showing strong emulsification activity, was selected by oil film-collapsing method. This bacterium was identified as Acinetobacter sp. and designated as Acinetobacter sp. 2-3A. The optimum temperature and pH on the growth of Acinetobacter sp. 2-3A were $25^{\circ}C$ and pH 7.0, respectively. The carbon and nitrogen sources for the most effective emulsification activity were 3.0% olive oil and 0.5% peptone, respectively. The 0.15% potassium phosphate was the most effective emulsification activity as a phosphate source. The optimum emulsification activity condition was $20^{\circ}C$, pH 7.0, and 2.0% NaCl. The optimum time for the best production of biosurfactant was 27 hrs. The emulsification stability was maintained at the temperature range from $4^{\circ}C$ to $100^{\circ}C$, pH range from 6.0 to 10.0, and NaCl range from 0% to 10%. For the oil resolvability of the biosurfactant, the residual oils were investigated by gas chromatography. As a result, it was verified that the biosurfactant decreased and decomposed crude oils from $_nC_{10}$ to $_nC_{32}$.

• Journal of Periodontal and Implant Science
• /
• v.44 no.5
• /
• pp.259-264
• /
• 2014

Purpose: The aim of this case report is to present the longitudinal results of sinus grafting using a new demineralized bovine bone material (DBBM) in human cases. Methods: A patient with a resorbed maxilla was treated by maxillary sinus grafting using a new deproteinized bovine bone material. After a healing period of 6.5 months, three implants were placed and restored. The patient was periodically recalled and followed up for 5 years after restoration. Results: Twelve partially edentulous patients (average age, 55.7 years) were followed up. All patients had insufficient residual height in their maxillary posterior area and underwent maxillary sinus graft surgery to increase the height of their maxilla. In all, 27 fixtures were placed in the augmented bone area. On average, 8.6 months later, implants were loaded using provisional or final restorations. The observation period ranged from 27 to 75 months (average, 43.3 months), and the patients did not show any severe resorption of the graft material or any infection during this time. Conclusions: Our results show that the new DBBM is useful for a maxillary sinus graft procedure. Good healing responses as well as reliable results were obtained for an average follow-up period of 43.3 months.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.828-836
• /
• 2015

In this paper, the assessment technique for track accuracy in the phased array radar is proposed. It is assumed that ${\alpha}-{\beta}$ tracking filter to track the target is established in the phased array radar. In order to assess the track accuracy strictly, we should use the real target position data acquired from the special instrument, ACMI(Air Combat Maneuvering Instrument) pod or DGPS(Differential Global Positioning System). However, this method leads to increase the experiment cost and test time. We derive the relationship between the residuals of tracking filter and the standard deviations of range and angle tracking errors which are assigned as track assessment index. The theory of sample variance is introduced in this assessment because track accuracy has to be calculated with many residual samples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3088-3095
• /
• 2000

Creep-fatigue crack growth behavior was experimentally measured particularly when a crack was located in the heat affected region of lCr-5Mo steel. Load hold times of the tests for trapezoidal fatigue waveshapes were varied among 0, 30, 300 and 3,600 seconds. Time-dependent crack growth rates were characterized by the $C_r$parameter. It was found that the crack growth rates were the highest when the crack path was located along the fine-grained heat affected zone(FGHAZ). Cracks located in other heat affected regions had a tendency to change the crack path eventually to FGHAZ. Creep-fatigue crack growth law of the studied case is suggested in terms of (da/dt)$_{avg}$ vs. ($C_t$)$_{avg}$ for residual life assessment.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.423-425
• /
• 2001

The Proper Orthogonal Decomposition (POD) technique was applied to investigate the effects of Reynolds number and the characteristics of the organized motions or coherent structures as a function of downstream position from x/D=2 to 6 in a turbulent axisymmetric shear layer at Reynolds numbers of 78,400, 117,600, and 156,800. Data were collected simultaneously using the 138 hot-wire probe used by Citriniti and George (2000). The POD was then applied to a double Fourier transform in time and azimuthal direction of the double velocity correlation tensor. The lowest azimuthal mode for all POD modes, which dominated the dynamics at x=D = 3 in the previous experiments, dies off rapidly downstream. This is consistent with a trend toward homogeneity in the downstream evolution, and suggests that some residual value may control the growth rate of the far jet. On the other hand, for the higher azimuthal modes, the peak shifts to lower mode numbers and actually increases with downstream distance. These mixing layer data, normalized by similarity variables for the mixing layer, collapse at all downstream positions and are nearly independent of Reynolds numbers.

• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.468-476
• /
• 2006

The objectives of this study were to determine the antioxidant and cytotoxic activities of Zelkova leaf extract and the sensory and textural characteristics of Zelkova leaf rice cake. The ethyl acetate layer of Zelkova leaf extract showed the most effective DPPH radical and superoxide anion scavenging activities. The residual layer of Zelkova leaf extract exhibited potent cytotoxicity against the HeLa cell line. In the sensory evaluation, the color and taste of Zelkova leaf rice cakes were not significantly different. Zelkova leaf rice cakes with 20%(5.18), 25%(4.94) and 30%(4.88) added Zelkova leaves showed higher overall acceptability than 0%(4.06) added Zelkova leaves. In the textural analysis, the hardness of the Zelkova leaf rice cake increased slowly with increasing leaf content during 3 day storage. The cohesiveness of 25% and 30% Zelkova leaf rice cakes showed no variation with storage time but that of 0% Zelkova leaf rice cakes decreased with increasing storage period. The 'L' value of Zelkova leaf rice cake decreased with increasing leaf content while the 'a' value of 0% Zelkova leaf rice cake was lower than that of 20%, 25% and 30% Zelkova leaf rice cakes.

• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.159-167
• /
• 1998

The purpose of this study was to investigate the cooking behavior of housewives in Seoul to reduce the food wastes. The obtained datas from the questionnaires were analyzed by SPSS program. Among the respondents 60.8% were 40 to 49 years old, and 50.l% had high school education background. Sixtyfive % had 3∼4 family members and 83.9% lived with their husbands and children. The income of 25.0% of the respondents was 1.5 to 2 million wens monthly Their housing environment showed that 37.7% of housing were private houses and 92.0% of kitchen were a stand-up type. Most respondents shopped at a supermarket (64.5%), and they expressed greate, concerns on the date of food production (58.4%) than its wastes (6.0%). Sixtyfour point nine% of the respondents prepared a kuk and chigae every meal and 46.2% of them prepared two meals at a time. Twentytwo point two% of the respondents ate all the kuk or chigae. The residual foods were kuk or chigae (47.6%), side dishes (42.3%), and main dishes (4.9%). Fortyfive point six% of the respondents believed that the improvement of eating habits needed for the reduction of food wastes.

• Steel and Composite Structures
• /
• v.21 no.4
• /
• pp.703-753
• /
• 2016

The ratcheting behavior was studied experimentally for Z2CND18.12N elbow piping under cyclic bending and steady internal pressure. Dozens of cyclic plasticity models for structural ratcheting responses simulations were used in the paper. The four models, namely, Bilinear (BKH), Multilinear (MKIN/KINH), Chaboche (CH3), were already available in the ANSYS finite element package. Advanced cyclic plasticity models, such as, modified Chaboche (CH4), Ohno-Wang, modified Ohno-Wang, Abdel Karim-Ohno and modified Abdel Karim-Ohno, were implemented into ANSYS for simulating the experimental responses. Results from the experimental and simulation studies were presented in order to demonstrate the state of structural ratcheting response simulation by these models. None of the models evaluated perform satisfactorily in simulating circumferential strain ratcheting response. Further, improvement in cyclic plasticity modeling and incorporation of material and structural features, like time-dependent, temperature-dependent, non-proportional, dynamic strain aging, residual stresses and anisotropy of materials in the analysis would be essential for advancement of low-cycle fatigue simulations of structures.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.543-554
• /
• 2019

İzmir Bay reserves high amount of residual alluvial deposits generated by Meles River at its stream mouth. These carried sediments with high water content and low bearing capacity are unsuitable in terms of engineering purposes. In-situ soil stabilization with deep soil mixing method is considered to improve properties of soil in this location. This method is widely used especially over Scandinavia, Japan and North America. Basically, the method covers mixing appropriate binder into the soil to improve soil profile according to the engineering needs. For this purpose, soil samples were initially provided from the site, classification tests were performed and optimum ratios of lime and cement binders were determined. Following, specimens representing the in-situ soil conditions were prepared and cured to be able to determine their engineering properties. Unconfined compression tests and vane shear tests were applied to evaluate the stabilization performance of binders on samples with different curing periods. Scanning electron microscope was used to observe time-dependent bonding progress of binders in order to validate the results. Utilization of 4% lime and 4% cement mixture for the long-term performance and 8% lime and 8% cement mixture for short term performance were suggested for the stabilization of Meles Delta soils. Development of CSH and CAH in a gel form as well as CSH crystals were clearly observed on SEM images of treated specimens.