• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권2호
• /
• pp.78-85
• /
• 2002

We introduce a rotational decision-directed joint algorithm of blind equalization coupled with carrier recovery for 32-QAM demodulation with high symbol rate. The proposed carrier recovery, which we call a rotational decision-directed carrier recovery(RDDCR), removes the residual phase difference by rotating the decision boundary for the kth received symbol by the frequency detector output of the (k-1)th received symbol. Since the RDDCR includes the function of PLL loop filter by rotating the decision boundary, it gives a simpler demodulator structure. The rotational decision-directed blind equalization(RDDBE) with the rotated decision boundary based on the Stop-and-Go Algorithm(SGA) operated during tracking the frequency offset by the RDDCR and removes intersymbol interference due to multipaths and channel noise. Test results show that symbol error rate of $10^{-3}$ is obtained before the forward error correction when SNR equals 15dB with 150KHz of carrier frequency offset and two multipaths, which is the channel condition for 32-QAM receiver.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권7호
• /
• pp.169-178
• /
• 2020

This study examines the current situation of responsibility accounting and proposed management solutions according to responsibility centers on public universities in Vietnam. The study applies quantitative research methods, and collected data through structured questionnaires to 138 public universities in Vietnam in 2019, receiving back 55 valid questionnaires. The data was cleaned and analyzed with SPSS software. The results show that most public universities in Vietnam assigned management responsibility to their departments, but responsibility accounting was not comprehensive since many universities are not financially autonomous. The Kruskal Wallis Test was conducted to compare the current situation of responsibility accounting among universities by the degree of autonomy and by geographic area. The research found out that totally autonomous universities assigned management responsibility to responsibility centers better than semi-autonomous and non-autonomous universities did. Regarding the evaluation of management responsibility, universities in Central Vietnam rated specific quantitative criteria, residual income (RI) and returns on investment (ROI) higher than universities in the North and the South of Vietnam did. However, universities in the South of Vietnam rated the evaluation of profits by department higher than the rest. The study also suggests structure for establishing responsibility centers in accordance with public universities in Vietnam.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.106-111
• /
• 2014

Welding is very popular method for joining two or more metals. However, welding causes residual stress and distortion and these give a bad influence to the structure strength. In this paper, TIG welding technique was performed to investigate the joint characteristics of AISI321 steel. For its evaluation, the orthogonal array method and variance analysis were applied with three factors of electric current, travel speed and argon gas and also three levels of each factor to tensile tests for optimum design. From the results, the increaser weld speed the narrower bead width and the lower weld penetration. The increaser electric current the brighter argon gas and the wider bead width. Also weld speed influenced most on the tensile strength and presumption range of tensile strength at optimal condition from reliability 95% was estimated to $635.02{\pm}14.64$. In addition the increaser weld speed and electric current the fracture occurred around bead vicinity.

• 한국포장학회지
• /
• 제12권2호
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1254-1261
• /
• 2007

The structure has several types of noise and booming noise of a vehicle is usually caused by the vibration of the vehicle's body transmitted from the engine through the mounting system. Vector synthesis analysis is performed to predict the booming noise when the characteristic of the engine mounting system is changed., i.e., when magnitudes and phases of vibratory forces after the mounts are altered. To use this method effectively, the concept of Multi-dimensional-analysis and Experimental Design are introduced to identify the contributions of each vibration sources and transmission paths to interior noise. It was used 3inputs/1output system and found the magnitudes and phases of the forces for minimizing the noise. Finally, the synthesized interior booming noise level is predicted by the vector synthesis diagram. It is shown that the vector synthesis method can be used to obtain the optimum design characteristic of the mounting system to control the interior booming noise of a vehicle.

• 펄프종이기술
• /
• 제45권2호
• /
• pp.21-26
• /
• 2013

Conversion of fructose to 5-hydroxymethylfurfural (5-HMF) was investigated in dimethylsulfoxide (DMSO) solvent with increasing reaction temperatures and impact of residual water from dehydration reaction byproduct. To convert fructose to 5-HMF, increasing reaction temperature led more conversion to 5-HMF than lower temperature at the range of $120-150^{\circ}C$ in DMSO solvent. DMSO engaged in the acid-catalyzed dehydration and rearrangement reaction as acid and solvent. Increasing temperature led to more furanose structure than pyranose at the range of $30-80^{\circ}C$. Formed 5-HMF could be degraded to levulinic and formic acid at the presence of acid and water. Removal of water in reaction medium could prevent 5-HMF degradation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2014

Floor Impact Noise is a structure-borne noise which is mainly caused by vibration of concrete slabs. The majority of previous studies have focused on investigating performance of absorbing sheets on the reduction of floor impact noise. But absorbing sheets do not efficiently reduce heavy-weight floor impact noise level because it cannot absorb slab vibration, which is the fundamental noise source. In this study, double-floor system was developed in order to reduce floor impact noise level in residual buildings. This floor system reduces heavy-weight impact noise level by reducing vibration response at the center of slab, which has maximum amplitude in the 1st vibration mode. In order to identify the performance of the double-floor system, experiments were planned. Primary test parameters are span of double floor, arrangement and types of absorbing sheets.

• 방송공학회논문지
• /
• 제7권1호
• /
• pp.37-44
• /
• 2002

본 논문에서는 동영상을 효율적으로 부호화하기 위한 새로운 다중 해상도 움직임 보상방법과 잉여 양자화 방법을 제안한다. 본 논문에서 제안하는 동영상 부호화기는 다단계 웨이브렛 분해, 움직임 예측 및 움직임 보상. 대역내에서의 래스터 주사. 블록 Tree의 구성 및 블록 분할. 적응적 산술 부호화기로 구성된다. 제안된 동영상 부호화기는 단순하면서도 낮은 연산량을 필요로 하며. 임베디드 특성과 SNR 계위 부호화 특성과 같은 좋은 기능을 제공한다. 또한 기존에 제안되었던 웨이브렛 변환을 이용하는 동영상 부호화 방법과 비교하여 우수한 성능을 제공한다.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

• 한국산업융합학회 논문집
• /
• 제23권4_1호
• /
• pp.531-539
• /
• 2020

When injection mold is repeatedly used for mass production, fatigue phenomenon due to cyclic stress may occur. The surface and interior of structure might be damaged due to cyclic stress or strain. The objective of this study was to analyze failure of SCM435 high-tension bolts connecting upper and lower parts of a three-stage injection molding machine. These bolts have to undergo an accurate heat treatment to prevent the formation of chromium carbide and the action of dynamic stresses. Bolts were fractured by cyclic bending stress in the observation of ratchet marks and beach marks. Damaged specimen showed an acicular microstructure. Impurity was observed. Chromium carbide was observed near the crack origin. Both shape parameters of the Vickers hardness were similar. However, the scale parameter of the damaged specimen was about 20% smaller than that of the as-received specimen. Much degradation occurred in the damaged specimen. Bolts should undergo an accurate heat treatment to prevent the formation of chromium carbide. They must prevent the action of dynamic stresses. Bolts need accurate tightening and accuracy of heat treatment and screws need compression residual stress due to peening.