• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.19-23
• /
• 2000

The increasing use of plastics in food packaging materials has led to the issue of food-packaging mutual interactions from residues in the plastics. Plastic films are commonly printed by using solvent-based ink to decorate the packaged food for consumer attention. However, the residual solvents can not be completely removed and they can migrate into the contained food which lead to undesirable off-flavors. Partitioning (Kp) of printing ink solvents was studied in two types of plastic films with different chemical structure and polarity. At $25^{\circ}C$, Kp of toluene is higher than that of isopropanol in PP, but isopropanol showed higher Kp value than toluene in EVOH. This showed that polarity had a significant effect on the partitioning of printing ink solvents into the plastic films. Printing solvents had a higher affinity to the polymer with similar polarity than it did to the different one.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.2
• /
• pp.86-95
• /
• 2001

Mechanical properties of electroplated gold microstructures were determined from the micromachined beam structures. Cantilever and bridge beam structures of different length were fabricated by electroplating-surface micromachining technique, which is specially designed to realize an anchor structure close to an ideal fixed-boundary condition. Fabricated beams were electrostatically excited and their resonance frequencies were measured by optical system composed of laser displacement meter with dynamic signal analyzer. Young's modulus and mean residual stress were calculated from the measured frequencies of microbeams. In addtion, stress gradient was measured using deformation of released cantilever beam structure.

• Structural Monitoring and Maintenance
• /
• v.1 no.3
• /
• pp.309-322
• /
• 2014

Detection of fatigue cracks at an early stage of their development is important in structural health monitoring. The breathing of cracks in a structure generates higher harmonic components of the exciting frequency in the frequency spectrum. Previously, the residual operational deflection shape (R-ODS) method was successfully applied to beams with a single crack. The method is based on the ODSs at the exciting frequency and its higher harmonic components which consider both amplitude and phase information of responses to map the deflection pattern of structures. Although the R-ODS method shows the location of a single crack clearly, its identification for the location of multiple cracks in a structure is not always obvious. Therefore, an improvement to the R-ODS method is presented here to make the identification process distinct for the beams with multiple cracks. Numerical and experimental examples are utilised to investigate the effectiveness of the improved method.

• Journal of applied mathematics & informatics
• /
• v.19 no.1_2
• /
• pp.151-164
• /
• 2005

The regularized structured total least norm (RSTLN) method finds an approximate solution x and error matrix E to the overdetermined linear system (H + E)x $\approx$ b, preserving structure of H. A new separation scheme by parts of variables for the regularized structured total least norm on blind deconvolution problem is suggested. A method combining the regularized structured total least norm method with a separation by parts of variables can be obtain a better approximated solution and a smaller residual. Computational results for the practical problem with Block Toeplitz with Toeplitz Block structure show the new method ensures more efficiency on image restoration.

• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.59-66
• /
• 1995

The living body consists of proteins, carbohydrates and fats. The above components are unstable to the change of circumstances ; thus ; when they are buried under the ground for a long time, they are disintegrated by physical effects such as pressure, water etc. However, it was recently reported that the part of the components of living body, especially fat thought in small guantity, remained in a relative stable state for many milleniuns. In addition, turned out that the structure of the composition of the fatty acid and sterol is different according to their species. For example, the plants - rice, barley, bean - and the animals - (togs, cow, pig, fish - have different structure of fat. Residual fat analysis is a research in the chemical composition of fat vemained in archaeological evidences on the basis of chemical structural differences as mentioned here in above. This paper introduces the residual fat analysis of archaeological evidences practical in Japan.

• Corrosion Science and Technology
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2005

Some feasibility studies are conducted to produce an advanced ceramic coating, which reveals superior chemical and mechanical strength, on metal base structure used in chemical plant. This advanced coating on metallic frame can replace ceramic delivery pipe and reaction chamber used in chemical plant, which are operated in hi-temperature and corrosive/erosive environment. An dual spraying is adopted to reduce the residual stress in order to increase the coating thickness and the residual stress is estimated by in-situ manner. Then new methodology is tried to form special coating of yttrium aluminum garnet(YAG), which reveals hi-strength and low-creep rates at hi-temperature, superior anti-corrosion property, hi-stability against Alkali-Vapor corrosion, and so on, on iron base structure. To verify the formation of YAG during thermal spraying, XRD(X ray diffraction) technique was used.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.49-54
• /
• 1999

In this paper. we studied cut off characteristics and fire hazard of residual current protective devices(RCD or ELB) for low voltage. The operative time of RCD with grounding resistance was analyzed by using RCD operating tester. The surface structure and composition of insulator were analyzed by using scanning electron microscope(SEM) and energy dispersive x-ray spectroscopy(EDX). The surface of phenol resin showed network structure and void. The spectra shown in EDX analysis are composed not only of the corresponding elements but also of several new spectra, as CK. OK$\alpha$. MgK, SiK. and CaK, which were absent in original material.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2003

In general, the microstructure in thin films was known to evolve in similar manner according to the energy striking the condensing film at similar homologous temperature, Th for the materials of the same crystal structure. The fundamental factors affecting particle energy are a function of processing parameters such as working pressure, bias voltage, target/sputtering gas mass ratio, cathode shape, and substrate orientation. In this study, Al, Cu, Pt films of the same crystal structure of face centered cubic (FCC) have been prepared under various processing parameters. The influence of processing variables on the microstructures and residual stress states in the films has been studied.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.466-471
• /
• 2005

The out-of-plane deformation in thin plate structure has been a serious qualify problem. It has been known that the out-of-plane deformation is caused by the angular deformation of welded joint. However, experimental results show that the conventional theory based on angular deformation is not appropriate for prediction of the out-of-plane deformation in thin plate structure. In this study, large deformation plate theory is introduced to clarify the effect of residual stress on the out-of-plane deformation. A simple equation is proposed to predict the out-of-plane deformation. The results by the proposed method show good agreement with the experimental results.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.2
• /
• pp.70-78
• /
• 1993

The presence of a residual stress in a thin film affects the properties and performances of the film, so the study of stress in a film must be very important. In this study, therefore, considering the characteristics of PECVD process, it was discussed that the residual stress, measured by $sin^2{\Psi}$ method, fo TiN films deposited on substrates with different TECs (thermal expansion coefficients) changed with film thickness. As a results, it was obtained that the residual stress of TiN film was compressive stress about all kinds of substrates and increased with film thickness. Also, the compressive residual stresses of TiN films increased in Si, Ti, STS304 order. According to the above results, we confirmed that the changes of residual stress of TiN film with substrates were due to the thermal stress originated form the difference in the TECs of the film and substrates, and that the intrinsic stress had dominating effect on the residual stress of TiN film deposited by PECVD. And in this study, the intrinsic stress of TiN film was compressive stress in spite of the Zone 1 structure. It is due to the entrapment of impurities in grain boundary or void.