• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.491-506
• /
• 2019

Literature regarding concrete walls reinforced by super elastic shape memory alloy (SMA) bars is rather limited. The seismic behavior of a system concurrently including a distinct steel reinforced concrete (RC) wall, as well as another wall reinforced by super elastic SMA at the first story, and steel rebar at upper stories, would be an interesting matter. In this paper, the seismic response of such a COMBINED system is compared to a conventional system with steel RC concrete walls (STEEL-Rein.) and also to a wall system with SMA rebar at the first story and steel rebar at other stories ( SMA-Rein.). Nonlinear time history analysis at maximum considered earthquake (MCE) and design bases earthquake (DBE) levels is conducted and the main responses like maximum inter-story drift ratio and residual inter-story drift ratio are investigated. Furthermore, incremental dynamic analysis is used to accomplish probabilistic seismic studies by creating fragility curves. Results demonstrated that the SMA-Rein. system, subjected to DBE and MCE ground motions, has almost zero and 0.27% residual maximum inter-story drifts, while the values for the COMBINED system are 0.25% and 0.51%. Furthermore, fragility curves show that using SMA rebar at the base of all walls causes a larger probability of exceedance 3% inter-story drift limit state compared to the COMBINED system. Static push over analysis demonstrated that the strength of the COMBINED model is almost 0.35% larger than that of the two other models, and its general post-yielding stiffness is also approximately twice the corresponding stiffness of the two other models.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.745-757
• /
• 2023

In order to study the fatigue performance of the flat steel plate-lightweight aggregate concrete hollow composite bridge slab subjected to fatigue load, both static test on two specimens and fatigue test on six specimens were conducted. The effects of the arrangement of the steel pipes, the amplitude of the fatigue load and the upper limit as well as lower limit of fatigue load on failure performance were investigated. Besides, for specimens in fatigue test, strains of the concrete, residual deflection, bending stiffness, residual bearing capacity and dynamic response were analyzed. Test results showed that the specimens failed in the fracture of the bottom flat steel plate regardless of the arrangement of the steel pipes. Moreover, the fatigue loading cycles of composite slab were mainly controlled by the amplitude of the fatigue load, but the influences of upper limit and lower limit of fatigue load on fatigue life was slight. The fatigue life of the composite bridge slabs can be determined by the fatigue strength of bottom flat steel plate, which can be calculated by the method of allowable stress amplitude in steel structure design code.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.9-18
• /
• 2019

In 2017 Pohang Earthquake, a number of residential buildings with pilotis at their first level were severely damaged. In this study, the results of an analytical investigation on the seismic performance and structural damage of two bearing wall buildings with pilotis are presented. The vibration mode and lateral force-resisting mechanism of the buildings with vertical and plan irregularity were investigated through elastic analysis. Then, based on the investigations, methods of nonlinear modeling for walls and columns at the piloti level were proposed. By performing nonlinear static and dynamic analyses, structural damages of the walls and columns at the piloti level under 2017 Pohang Earthquake were predicted. The results show that the area and arrangement of walls in the piloti level significantly affected the seismic safety of the buildings. Initially, the lateral resistance of the piloti story was dominated mainly by the walls resisting in-plane shear. After shear cracking and yielding of the walls, the columns showing double-curvature flexural behavior contributed significantly to the residual strength and ductility.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.453-456
• /
• 2003

This research is to evaluate the seismic performance of reinforced concrete bridge piers with lap-spliced longitudinal reinforcement steels in the plastic hinge region, and to develop the enhancement scheme of their seismic capacity. Six circular columns of 0.6m diameter and 1.5m height were made with two confinement steel ratios. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under an axial load, P=$0.1f_{ck}A_{g}$, and residual seismic performance of damaged columns was evaluated. Test results show that RC bridge piers with lap-spliced longitudinal steels behaved with minor damage even under artificial earthquakes with 0.22g PGA, but failed at low ductility subjected to the subsequent quasi-static load test. This failure was due to the debonding of the lap splice. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region showed significant improvement both in flexural strength and displacement ductility.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.505-511
• /
• 2003

Experimental investigation was conducted into the flexure/shear-critical behavior of earthquake-damaged reinforced concrete columns with lap splicing of longitudinal reinforcement in the plastic hinge region. Six test specimens in the aspect ratio of 2,5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes of which magnitude could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P=$0.1f_{ck}A_g. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that RC bridge piers with lap-spliced longitudinal steels in the plastic hinge region appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility, and strain energy ductility.

• 콘크리트학회논문집
• /
• 제26권5호
• /
• pp.627-634
• /
• 2014

본 연구에서는 폭발에 의한 국부손상이 철근콘크리트 보의 잔류 휨강도 및 연성에 미치는 영향을 알아보기 위하여 $160{\times}290{\times}2200mm$의 철근콘크리트 보에 대하여 근접 폭발 시험과 정하중 휨시험을 수행하였다. 또한 이 시험을 통해 강섬유 및 FRP 시트로 보강한 철근콘크리트 보의 폭발저항성능을 평가하였다. 장약량 1kg, 이격거리 0.1m의 폭발 시험을 수행하였으며, 시험 후 시험체의 crater, spall 지름과 무게손실(weight loss)을 측정하여 시험체의 국부손상을 평가하였다. 또한 폭발하중을 받지 않은 시험체와 폭발하중을 받아 국부손상이 발생한 시험체의 정하중 휨시험을 수행하여 휨강도 및 연성지수를 측정하였다. 시험결과, 보통콘크리트 시험체(NC)는 비교적 큰 crater와 spall이 발생하였으며 국부손상에 의한 무게 손실이 23.5kg 발생하였다. 반면 강섬유보강콘크리트 시험체(SFRC)와 FRP 시트 보강 시험체(NC-F, NC-FS)는 NC에 비해 crater 크기와 무게손실이 감소하며 향상된 폭발저항성능을 나타내었다. 또한 폭발하중에 의해 국부손상이 발생한 시험체들은 휨강도와 연성지수가 감소하였다. 특히 NC는 잔류 휨강도가 기존 강도에 비해 크게 감소하였고 압축철근의 좌굴현상이 나타나며 취성적으로 파괴되었다. 강섬유와 FRP 시트로 보강한 시험체의 경우 잔류 휨강도 및 연성지수가 NC에 비해 증가하였다. 이를 통해 폭발이 발생할 경우, 충분한 이격거리를 확보하지 못하면 장약량이 적더라도 구조부재에 심각한 국부손상을 발생 시킬 수 있다는 것을 알 수 있었으며, 강섬유와 FRP 시트에 의한 보강 방법이 폭발저항성능을 향상시킨다는 것을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.391-400
• /
• 2019

화재발생 시 구조물의 부재는 온도상승에 의하여 본래의 강성을 잃게 되어 하중 지지력이 감소하게 된다. 구조 부재에 급격한 내력 상실은 구조물의 붕괴 및 인명 피해로 이어질 수 있다. 구조물의 화재 시간이 길어지게 되면 구조 부재에 대한 내력 상실은 더욱 증가하게 된다. 건축물의 붕괴를 방지하기 위하여 부재 손상 여부의 파악은 매우 중요한 과제이나 국내에서 부재의 잔존내력을 진단하고 평가하는 지침이 될 만한 자료는 미비한 실정이다. 따라서 본 연구는 구조 부재 중 합성구조인 합성보를 유한요소해석을 통하여 내화성능을 분석하고자 한다. 합성보 모델링은 한국전력기술의 협조를 받아 원자력 발전소 보조건물(Electrical Penetration Room, EPR)에 사용되는 도면을 바탕으로 수행하였다. 유한요소해석 프로그램인 ANSYS를 이용하여 정해석 단계의 열전달 해석과 구조해석을 수행하였다. 열전달 해석 결과로 얻어진 온도분포를 데이터로 확보하여 구조해석에 열전달해석 결과를 반영시켰다. 잔존성능을 분석하기 위하여 합성보의 온도분포와 열 영향을 받은 구조해석의 최대변위 결과를 도출하여 실험 결과 데이터와 구조해석 결과 데이터를 비교분석하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.337-341
• /
• 2004

Engineering ceramics have superior heat resistance, corrosion resistance, and wear resistance. Consequently, these art significant candidates for hot-section structural components of heat engine and the inner containment of nuclear fusion reactor. Besides, some of them have the ability to heal cracks and great benefit can be anticipated with great benefit the structural engineering field. Especially, law fracture toughness of ceramics supplement with self-healing ability. In the present study, we have been noticed some practically important points for the healing behavior of silicon nitride, alumina, mullite with SiC particle and whisker. The presence of silicon carbide (SiC) in ceramic compound is very important for crack-healing behavior. However, self-healing of SiC has not been investigated well in detail yet. In this study, commercial SiC was selected as sample, which can be anticipated in the excellent crack healing ability. The specimens were produced three-point bending specimen with a critical semi-circular crack of which size that is about $50-700{\mu}m$. Three-point bending test and static fatigue test were performed cracked and healed SiC specimens. A monotonic bending load was applied to cracked specimens by three-point loading at different temperature. The purpose of this paper is to report Strength Properties and Elastic Waves Characteristics of Silicon Carbide with Crack Healing Ability.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.697-702
• /
• 2012

In this study, unidirectional and plain woven carbon fiber reinforced magnesium matrix composite laminates were fabricated by the liquid pressing infiltration process, and evolutions of the microstructure and compressive strength of the composite laminates under corrosion were investigated by static immersion tests. In the case of the unidirectional composite laminate, the main microstructural damage during immersion appeared as a form of corrosion induced cracks, which were formed at both CF/Mg interfaces and the interfaces between layers. On the otherhand, wrap/fill interface cracks were mainly formed in the plain woven composite laminate, without any cracks at the CF/Mg interface. The formation of these cracks was considered to be associated with internal thermal residual stress, which was generated during cooling after the fabrication process of these materials. As a consequence of the corrosion induced cracks, the thickness of both laminates increased in directions vertical to the fibers with increasing immersion time. With increasing immersion time, the compressive strengths of both composite laminates also decreased continuously. It was found that the plain woven composite laminates have superior corrosion resistance and stability under a corrosive condition than unidirectional laminates.

• 대한토목학회논문집
• /
• 제26권5A호
• /
• pp.873-880
• /
• 2006

본 논문에서는 기존의 수평전단 설계식을 적용하여 프리캐스트 바닥판 PSC 합성거더 교량을 설계, 제작하였다. 피로하중에 대한 바닥판과 거더 그리고 전단연결부의 내구성과 거동특성을 평가하기 위하여 피로실험을 수행하였다. 실험결과 200만회 반복하중을 재하한 후 바닥판과 거더의 균열 및 잔류처짐은 발생하지 않았으며, 휨강성의 감소없이 선형거동을 나타냈다. 그리고 전단연결부의 손상은 나타나지 않았다. 또한 정적실험을 수행하여 연결부의 거동과 설계식의 적용성을 평가하고, 극한하중 상태에서의 구조적 성능과 정적강도 등을 평가하였다. 프리캐스트 바닥판 PSC 합성거더 교량은 사용하중상태에서 균열에 대해 2.08의 안전율을 나타냈으며, 파괴 시 충분한 극한내력과 연성거동을 나타냈다. 수평전단 설계식을 프리캐스트 바닥판 PSC 합성거더 교량의 수평전단 설계에 적용할 경우 사용성 및 구조적 안전성에 문제가 없는 경제적이고 신속한 형태의 교량을 시공할 수 있을 것으로 판단된다.