• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1495-1500
• /
• 2008

In an attempt to develop a probiotic formulation for poultry feed, a number of lactic acid bacteria (LAB) were isolated from chicken intestinal specimens and a series of in vitro experiments were performed to evaluate their efficacy as a potential probiotic candidate. A total of 650 LAB strains were isolated and screened for their antagonistic potential against each other. Among all the isolates only three isolates (TMU121, 094 and 457) demonstrated a wide spectrum of inhibition and were thus selected for detailed investigations. All three selected isolates were able to inhibit the growth of E. coli and Salmonella species, although to variable extent. The nature of the inhibitory substance produced by the isolates TMU121 and 094 appeared to be associated with bacteriocin, as their activity was completely lost after treatment with proteolytic enzymes, while pH neutralization and catalase enzyme had no effect on the residual activity. In contrast, isolate TMU457 was able to resist the effect of proteolytic enzymes while pH neutralization completely destroyed its activity. Attempts were made to study the acid, bile tolerance and cell surface hydrophobicity of these isolates. TMU121 showed high bile salt tolerance (0.3%) and high cell surface hydrophobicity compared to the other two strains studied, while TMU094 appeared the most pH resistant strain. Based on these results, the three selected LAB isolates were considered as potential ingredients for a chicken probiotic feed formulation and were identified to species level based on their carbohydrate fermentation pattern by using API 50CH test kits. The three strains were identified as Lactobacillus fermentum TMU121, Lactobacillus rhamnosus TMU094, and Pediococcus pentosaceous TMU457.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.639-643
• /
• 2008

STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual monomer may cause deleterious effect on the properties. PURPOSE: The purpose of this study was to measure the degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials by using an infrared spectroscopic method. MATERIAL AND METHODS: Chemically activated three bis-acrylic based provisional crown and fixed partial denture materials, LuxaTemp [DMG, Hamburg, Germany], fast set TemPhase [Kerr, Orange, CA, USA] and Protemp 3 Garant [3M-ESPE, St Paul, MN, USA], were investigated by Fourier transform infrared spectrometry (FTIR). The FTIR spectra of the materials tested were immediately obtained after mixing. The specimens were stored under dry conditions and at $23^{\circ}C$ for 24 hours, and then the spectra of the materials were also obtained. The degree of conversion (%) was calculated from the spectrum of the absorbance between the aliphatic double bond at 1637 $cm^{-1}$ and the aromatic double bond at 1608 $cm^{-1}$ using the baseline method. The data were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. RESULTS: The mean value and standard deviation of the degree of conversion were 52.5 % ${\pm}$ 1.1 %, 50.3 % ${\pm}$ 0.8 %, and 42.3 % ${\pm}$ 4.9 % for LuxaTemp, Protemp 3 Garant and fast set TemPhase, respectively. There was no significant difference between LuxaTemp and Protemp 3 Garant, whereas there was a statistically difference between Protemp 3 Garant and fast set TemPhase, and LuxaTemp and fast set TemPhase (P < .05). CONCLUSION: The degree of conversion of fast set TemPhase was significantly lower than those of the others. The degree of conversion may be correlated with the rate of polymerization.

• Journal of Broadcast Engineering
• /
• v.20 no.3
• /
• pp.414-420
• /
• 2015

The quality of depth images is important in the 3D video system to represent complete 3D contents. However, the original depth image from a depth camera has a low resolution and a flickering problem which shows vibrating depth values in terms of temporal meaning. This problem causes an uncomfortable feeling when we look 3D contents. In order to solve a low resolution problem, we employ 3D warping and a depth weighted joint bilateral filter. A temporal mean filter can be applied to solve the flickering problem while we encounter a residual spectrum problem in the depth image. Thus, after classifying foreground andbackground regions, we use an upsampled depth image for a foreground region and temporal mean image for background region.Test results shows that the proposed method generates a time consistent depth video with a high resolution.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.341-347
• /
• 1998

We analyzed photoreflectance (PR) characterization of the $Al_xGa_{1-x}As$ epilayer grown by molecular beam epitaxy (MBE) method. The band-gap energy $(E_0)$ satisfying low power Franx-Keldysh (LPFK) due to GaAs buffer layer is 1.415 eV, interface electricall field $(E_i)$ is 1.05$\times$$10^4$V/cm, carrier concentration (N) is $1.3{\times}10^{15}\textrm{cm}^{-3}$. In PR spectrum intensity analysis at 300 K the $A^*$ peak below $(E_0)$ signal is low and distorted because of residual impurity in sample growth. The trap characteristic time ${\tau}_i$ of GaAs buffer layer is about 0.086 ms, and two superposed PR signal near 1.42eV consist of the third derivative signal of chemically eteched GaAs substrate and Franz-Keldysh oscillation (FKO) signal due to GaAs buffer layer.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.229-237
• /
• 1998

We grew the hexagonal GaN films on (100) Si and (00.1) sapphire substrates in the temperature range of $300~730^{\circ}C$ by the direct reaction between thermally ionized N-source and thermally evaporated Ga-source. The GaN growth rates are increased at the initial stage of GaN formation and it was saturated to some values by the coalescence of each crystallites. The oxygen signal was observed in XPS spectra for all the GaN films grown in this work, especially low- temperature grown GaN film may due to incorporation of the residual oxygen in the growth chamber. The surface of low-temperature and shorter time grown films covered only Ga-droplets. however, with increasing the both substrate temperature and the growth time GaN is growth to crystallites. and coalescence to ring-type crystallites. With sufficient supply of N-source, they were changed to platelets. In the PL spectrum measured at 20 K, we observed the impurity related emission at 3.32eV and 3.38eV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.822-829
• /
• 2009

This paper proposes a new method of improving the quality of High Efficiency Advanced Audio Coding (HE-AAC). HE-AAC encodes input source by allocating bits for each scalefactor bands appropriately according to human ear's psychoacoustic property. As a result, insufficient bits are assigned to the bands which have relatively low energy. This imbalance between different energy bands can cause decreasing of sound quality like musical noise. In the proposed system, a Linear Prediction (LP) module is combined with HE-AAC as a pre-processor to improve sound quality by even bits distribution. To apply accurate human being's psychoacoustic property, the psychoacoustic model uses Fast Fourier Transform (FFT) spectrum of original input signal to make masking threshold. In its implementation, masking threshold of psychoacoustic model is normalized using the LP spectral envelope in prior to quantization of the LP residual. Experimental result shows that, the proposed algorithm allocates bits appropriately for insufficient bits condition and improves the performance of HE-AAC.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.66-71
• /
• 2006

Fluoroquinoles have a wide range of antimicrobial properties and are effective in the treatment of bacterial diseases in fish. The use of fluoroquinoles continues to grow steadily. Fluoroquinolone antibiotics are probably the most important class used among synthetic antibiotics in human and veterinary medicines because of their broad activity spectrum and good oral absorption. This study was conducted to estimate the residue of antibiotics in four species of farmed fishes, including olive flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli), red sea bream (Pagrus major), and sea bass (Lateolabrax japonicus), collected from fish farms located in the southern coastal area of Korea. The residues of fluoroquinolones were determined using high performance liquid chromatography (HPLC) with a fluorescence detector. Residuals of five fluoroquinolones in muscle tissue of farmed fish were analyzed. We found that enrofloxacin was the most common agent in fish muscle, and that ciprofloxacin was the next most common. The range of detected concentrations of fluoroquinolones in olive flounder muscle was 0-0.859 mg/kg in 32.6% of all samples. Enrofloxacin was commonly detected in sea bass muscle at a range of 0-0.143 mg/kg in 38.9% of all samples. Fluoroquinolones were detected in 6.9% of black rock fish muscle and in 16.6% of sea bream, although the detected concentration was below 0.01 mg/kg. The maximum detection value of enrofloxacin and ofloxacin in olive flounder at the time of shipping was 0.102 mg/kg and 0.09 mg/kg, respectively; no other antimicrobials were detected. We detected no antimicrobial substances in red sea bream.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.117.1-117.1
• /
• 2011

We present the smoothness of mid-infrared sky brightness from the Japanese infrared astronomical satellite, AKARI observations. AKARI monitored the north ecliptic pole (NEP) during its cold phase with nine wavebands from 2.4 to 24 ${\mu}m$, out of which six mid-infrared bands are used in this study. Simple sinusoidal fit to the seasonal variation of the sky brightness shows that the mid-infrared brightness towards the NEP is not affected by small-scale features of the interplanetary dust cloud. We applied the power spectrum analysis to the images to search for the fluctuation of sky brightness. The fluctuation powers at 200 arcsecond are estimated to be at most $1.58{\pm}0.33\;nW\;m^{-2}sr^{-1}$ or 0.13% of the total brightness at $7{\mu}m$ and a tleast $0.64{\pm}0.11\;nW\;m^{-2}sr^{-1}$ or 0.02% at $18{\mu}m$. The residual fluctuations at a few arcminute scales at short mid-infrared wavelengths (7, 9, and 11 ${\mu}m$) are consistent with those expected from the diffuse galactic light. At long mid-infrared wavelengths (15, 18, and 24 ${\mu}m$) the measured fluctuations are comparable to or smaller than the one caused by photon noise and their sources are not identified. We conclude that the upper limit of the fluctuation in the zodiacal light is about 0.02% of the sky brightness.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.526-531
• /
• 1998

A hydride vapor phase epitaxy (HVPE) method was performed to grow the $10~240\mu{m}$ thick GaN films on (111) spinel $MgAl_2O_4$ substrate. The GaN films on $MgAl_2O_4$ substrate revealed a photoluminescence (PL) characteristics of the impurity doped GaN by the out-diffusion and auto-doping of Mg from $MgAl_2O_4$ substrate during GaN growth. The PL spectrum measured at 10K consists of free and bound excitons related recombination transitions and impurity-related donor-acceptor pair recombination and its phonon replicas. However, the deep-level related yellow band emission was not observed. The peak energy of neutral donor bound excitonic emission and the frequency of Raman $E_2$ mode were exponentially decreased with increasing the GaN thicknesses. and the frequency of E, Raman mode was shifted with the relation of $\Delta$$\omega$=3.93$\sigma$($cm^{-1}$/GPa), where l1 (GPa) is the residual strain in the GaN epilayers.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.13-19
• /
• 2003

In this paper, we studied on the characteristics of RCD(Residual Current Device) case deteriorated by tracking, and compared the tracked samples between in the site of fire($S_1$) and in the reappearance experiment($E_1$). This experiment is applied to IEC Publ. 112 method. Electrical fire by tracking occurred after scintillation and dry-band generated. The insulation resistance between source terminals of RCD case was about 25.7Ω in $E_1$ and the resistance was about 58.6Ω in $S_1$.The exothermic peaks of $E_1$ appeared at $491.0^{\circ}C$ and $603.2^{\circ}C$. The exothermic peak at $603.2^{\circ}C$ was shown by tracking. And the exothermic peak of $S_1$ appeared at $593.1^{\circ}C$. In spectrum of $S_1$ and $E_1$, absorption peak didn't appear at near 1590 cm$^{-1}$ .