• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.26-33
• /
• 2005

The effects of carbon sources for exopolysaccharide production during batch cultivation of an Enterobacter sp. isolated from the composter were investigated. The highest amount of exopolysaccharide was obtained when lactose was used as carbon source. Lactose in medium was converted into glucose and galactose. Glucose was metabolized fast and was completely consumed, but about $20\%$ of lactose was accumulated as galactose. On the other hand, enzyme activity was about $350\~450$ unit with the increase of lactose concentration. Thus, it was considered that the exopolysaccharide might be produced in the course of that lactose was hydrolyzed into glucose and galactose by $\beta-galactosidase$ with respect to that enzyme activity on lactose hydrolysis was accorded to the exopolysaccharide production. When glucose and galactose were added to lactose medium, respectively, it could be considered that glucose was as a repressor and galactose was as a inducer for $\beta-galactosidase$ synthesis even though the mechanisms were not elucidated. The increase of lactose concentration was almost ineffective to the specific growth rate $(0.133\~0.151\;hr^[-1})$ but showed the difference in the biomass content. The higher carbon source concentration, the more residual sugar remained. It was assumed that the optimum lactose concentration for exopolysaccharide production was $30\~70g/L.$ On the other hand, it was considered that the nitrogen acted as growth limiting nutrients to the cell growth. In the cases of 30 and 70 g/L of the fixed carbon concentrations, the increase of the nitrogen sources concentration caused a remarkable increase within the range of $0.059\~0.225\;hr^{-1}$ and $0.141\~0.237hr^{-1}$ of the specific growth rate, respectively, while there was no significant difference in biomass.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.2
• /
• pp.69-78
• /
• 2019

The objective of this study was to investigate the quality properties of sausages added with the atmospheric pressure plasma treated extract of Perilla frutescens Britton var. acuta Kudo (red perilla). The lyophilized powder of red perilla extract treated by atmospheric-pressure plasma contained 7.5 g kg^-1 nitrite. Sausage samples were manufactured with the addition of sodium nitrite (Control), celery powder (Celery), or plasma-treated extract of red perilla (PTP) to obtain nitrite concentration of 70 mg kg^-1. The residual nitrite content was the lowest in PTP during storage for 21 days at 4℃ (p<0.05). The total aerobic bacteria counts were higher in PTP than in Control and Celery during storage at 4℃ (p<0.05). Malondialdehyde content of sausages was significantly lower in PTP than in Control and Celery during storage (p<0.05). PTP showed the lowest L^* value and the highest b^* value among the tested sausage samples during storage (p<0.05). PTP received the low scores in all the sensory properties of sausages because of its inherent color and flavor. The results suggested that the plasma-treated extract of red perilla was an unsuitable natural nitrite source for cured meat products because of its adverse effect on sensory quality. However, natural nitrite source with increased nitrite content can be produced by the treatment of the natural plant extract with atmospheric-pressure plasma.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.20-28
• /
• 2012

DVC(Distributed Video Coding) technique is a new paradigm, which is based on the Slepian-Wolf and Wyner-Ziv theorems. DVC offers not only flexible partitioning of the complexity between the encoder and decoder, but also robustness to channel errors due to intrinsic joint source-channel coding. Many conventional research works have been focused on the light video encoder and its rate-distortion performance improvement. However, in this paper, we propose a new DVC codec which is effectively applicable for error-prone environment. The proposed method adopts a quantiser without dead-zone and symmetric Gray code around zero value. Through computer simulations, the proposed method is evaluated by the bit errors position as well as the number of burst bit errors. Additionally, it is shown that the maximum and minimum transmission rate for the given application can be linearly determined by the number of bit errors.

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.387-403
• /
• 2016

In this paper, an integrated model for the wave (current)-induced seabed response is presented. The present model consists of two parts: hydrodynamic model for wave-current interactions and poro-elastic seabed model for pore accumulations. In the wave-current model, based on the fifth-order wave theory, ocean waves were generated by adding a source function into the mass conservation equation. Then, currents were simulated through imposing a steady inlet velocity on one domain and pressure outlet on the other side. In addition, both of the Reynolds-Averaged Navier-Stokers (RANS) Equations and $k-{\varepsilon}$ turbulence model would be applied in the fluid field. Once the wave pressures on the seabed calculated through the wave-current interaction model, it would be applied to be boundary conditions on the seabed model. In the seabed model, the poro-elastic theory would be imposed to simulate the seabed soil response. After comparing with the experimental data, the effect of currents on the seabed response would be examined by emphasize on the residual mechanisms of the pore pressure inside the soil. The build-up of the pore water pressure and the resulted liquefaction phenomenon will be fully investigated. A parametric study will also be conducted to examine the effects of waves and currents as well as soil properties on the pore pressure accumulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1435-1442
• /
• 2014

This study presented numerical simulations of smooth-bed flows in the rectangular open-channel using the source code by OpenFOAM. For the analysis of the turbulent flow, Large Eddy Simulations were carried out and the dynamic sub-grid scale model proposed by Germano et al. (1991) is used to model the residual stress term. In order to analyze the coherent structure, the uw quadrant method proposed by Lu and Willmarth (1973) is used and the contribution rate and the fraction time of the instantaneous Reynolds stress are obtained in the Reynolds stress. The results by the present study are analyzed and compared with data from previous laboratory studies and direct numerical simulations. It is found that the contribution rate of the ejection events is larger than that of sweep events over the buffer layer in the open-channel flow over the smooth bed, however, the frequency of the sweep event is higher than that of the ejection events.

• Food Science of Animal Resources
• /
• v.36 no.3
• /
• pp.319-325
• /
• 2016

This study was conducted to determine the residual amount of veterinary drugs such as meloxicam, flunixin, and tulathromycin in animal products (beef, pork, horsemeat, and milk). Veterinary drugs have been widely used in the rearing of livestock to prevent and treat diseases. A total of 152 samples were purchased from markets located in major Korean cities (Seoul, Busan, Incheon, Daegu, Daejeon, Gwangju, Ulsan and Jeju), including Jeju. Veterinary drugs were analyzed by liquid chromatography-tandem mass spectrometry according to the Korean Food Standards Code. The resulting data, which are located within 70-120% of recovery range and less than 20% of relative standard deviations, are in compliance with the criteria of CODEX. A total of five veterinary drugs were detected in 152 samples, giving a detection rate of approximately 3.3%; and no food source violated the guideline values. Our result indicated that most of the veterinary drug residues in animal products were below the maximum residue limits specified in Korea.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.21-28
• /
• 2016

This paper presents a cooperative transmission scheme for underwater acoustic sensor networks to improve packet transmission rate and reduce energy consumption. Source node transmits duplicated information relayed by distributed antennas called a virtual antenna array. Destination node combines that information to reduce packet error rate. The suggested cooperative scheme enhances the reliability by providing high diversity gains through intermediate relay nodes to overcome the distinct characteristics of the underwater channel, such as high transmission loss, propagation delay, and ambient noises. It is suggested that the algorithm select destinations and potential relays from a set of neighboring nodes that utilize distance cost, the residual energy of each node and local measurement of the channel conditions into calculation. Simulation results show that the proposed scheme reduces average energy consumption, response time, and increases packet delivery ratio compared with the SPF(Shortest Path First) and non-cooperative scheme using OPNET Moduler.

• Journal of Wetlands Research
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2020

Non-point pollution adversely affects the water system and its influence is increasing. In order to manage such nonpoint source pollution, the government has conducted studies on LID (Low Impact Development) facilities and various efficiency evaluations. In this study, the actual installed permeable block facility among the various LID facilities was analyzed the effluent reduction rate, the residual rainfall analysis, the runoff duration time and the reduction rate of the maximum inflow and outflow for the rainfall runoff control and the results were compared the other facilities. The analysis results show that the reduction efficiency is high in order of impermeable block, filter type permeable block, and clearance type permeable block, and the graph showing the relationship between the rainfall intensity and the runoff duration time is presented. This graph can be helpful in the design of facilities such as the facility capacity selection according to the reproduction period of the permeable block facility similar to this.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.130-137
• /
• 1983

A wide variety of pathogens are known io be seedborne, carried either as infectious mycelium internally or as contaminants on the seed coat. When seed is infected with a pathogen, the seed nay be rendered nonviable or it may remain viable but produce weak seedling. In some cases, the Infected seedling nay not be severely weakened, but nay serve as a source of primary inoculum within a community of plants. A recent problem nay be the dissemination of seedborne pathogens occurring as a result of the massive movements of seed, as a part of the 'Green revolution' Disease of great danger to agriculture may be introduced with seed from other parts of world. Seed treatment with organic mercury compounds in liquid form had become popular since about 1955. Organic mercury compounds contributed considerably to the increase in production of many crops and vegetables. In 1975, however, the use of organic mercury compound was forbidden because of doubts regarding their residual mammalian toxicity in agricultural products. Benomyl-thiram mixture, thiophanate methyl-;hiram mixture and TCMB have now been registered as seed disinfectants for the use of rice blast, brown spot and Bakanae disease. Oxathiinsthiram mixture has been registered as seed disinfectant for barley and wheat loose smut and leaf stripe of barley. Agricultural techniques have made such rapid progress that the nursery methods changed from the use of paddy nursery to box nursery designed for machine-transplanting. The spread of rice transplanting machines has caused increase of seedborne diseases. Among seedborne diseases, Bakanae disease has remarkably increased and causes much damage recently. In order to counter this trend, seed disinfectants must also be diversified. First, effective non-selective disinfectants need to be developed, and second, appropriate control methods always need to be prepared in parallel with the development of new techniques for cultivation.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.272-277
• /
• 2002

Aluminum nitride (AlN) powders and whiskers were synthesized by a modified carbothermal reduction and nitridation where a ($NH_4)[Al(ethylenediaminetetraacetate)]{\cdot}2H_2O$ complex is used as precursor. The AlN powders were obtained by calcining the complex without mixing any carbon source under a flow of nitrogen in the temperature range 1200∼1500$^{\circ}$C and then burning out the residual carbon. The nitridation process was investigated by $^{27}Al$ magic-angle spinning (MAS) unclear magnetic resonance, infrared spectroscopy and X-ray diffraction. The complex is pyrolyzed, converted to ${\rho}$- and ${\gamma}$- alumina and then nitridated to AlN without ${\gamma}-{\alpha}$ alumina transition. The morphology of ${\gamma}$-alumina, when it was converted to AlN, was retained, strongly indicating that ${\gamma}$-alumina is converted to AlN through solid-state $AlO_xN_y$, not through gaseous intermediates such as aluminum and aluminaum suboxides. AlN whiskers were obtained, when a (0001) sapphire was used as a catalyst.