• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.4
• /
• pp.182-190
• /
• 2020

This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.396-408
• /
• 2019

The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.8
• /
• pp.47-55
• /
• 2009

This research has the purpose to examine the potential of shell, a byproduct of maritime products to be utilized as alternative environment-friendly construction material by mixing and applying it with residual soit which is used as burial or filling material to recycle it. To that end, the research looked into the mechanical characteristics of shell through cyclic triaxial test by mixing it with residual soil. With the mixing ratios of shell of 5 groups set at 5.0%, 10.0%, 20.0%, 40.0% and 60.0%, the mixture soils was processed through a series of cyclic triaxial tests. And it was shown that liquefation resistance has limitation in the mixed soils with shell substitute content ratios exceeding 20.0%. To increase the liquefaction resistance of the mixed soil, this research has shown that addition of moderate amount of glass fibers would suffice.

• Composites Research
• /
• v.21 no.3
• /
• pp.9-17
• /
• 2008

In this paper, the low velocity impact characteristics of filament winding CFRP pressure vessel was investigated using numerical and experimental methods. The cylinder part of CFRP vessel was impacted using triangular shape impactor which simulated the sharp edge of dropping tools and impact response behavior of CFRP was reviewed. The mechanical behavior, such as deformation and stress distribution, were also predicted by explicit finite element method and the validity of the model was investigated. For the quantitative evaluation of the residual strength of the pressure vessel after impact, a series of the ring specimens was cut from the impacted vessel and its burst pressure was measured by hydraulic pressure hoop tension test. As the results, the relationship between the residual strength degradation and the impact energy was successively obtained and a useful methodology to evaluate quantitatively the impact damage tolerance of CFRP pressure vessel was established.

• Journal of the Korean association of regional geographers
• /
• v.17 no.4
• /
• pp.432-442
• /
• 2011

Climatic variables such as temperature and precipitation tend to vary both in space and in time simultaneously. Thus, it is necessary to include space-time autocorrelation into conventional spatial interpolation methods for reliable time-series mapping. This paper introduces and applies space-time variogram modeling and space-time kriging to generate time-series temperature maps using hourly Automatic Weather System(AWS) temperature observation data for a one-month period. First, temperature observation data are decomposed into deterministic trend and stochastic residual components. For trend component modeling, elevation data which have reasonable correlation with temperature are used as secondary information to generate trend component with topographic effects. Then, space-time variograms of residual components are estimated and modelled by using a product-sum space-time variogram model to account for not only autocorrelation both in space and in time, but also their interactions. From a case study, space-time kriging outperforms both conventional space only ordinary kriging and regression-kriging, which indicates the importance of using space-time autocorrelation information as well as elevation data. It is expected that space-time kriging would be a useful tool when a space-poor but time-rich dataset is analyzed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.519-524
• /
• 2013

pH buffer capacities (pHBC, $cmol_c\;kg^{-1}\;pH^{-1}$) of 6 residual Entisols derived from granite, granite-gneiss, limestone, sandstone, shale, and basalt in Korea were studied. Soil acidity may become a problem if the soil pH is reduced to critical levels when nutrient cycles are unbalanced (especially N, C and S). The relation between the pHBC and the physico-chemical properties of the 6 soils was also studied. In the A horizons of all the soils except Euiseong series developed from sandstone, the contents of clay, organic matter and cation exchange capacity (CEC) were higher than those of C horizon, but bulk density and pH were lower than C horizon. Clay content of Euiseong series decreased with soil depth, which might be caused by the elluviation. The soils developed from granite, granite-gneiss and sandstone have a higher $SiO_2$ content than those developed from basalt and limestone. The contents of $Fe_2O_3$ and MgO were high in the soils from developed from basalt, limestone and shale comparing with the soils from granite, granite-gneiss and sandstone. The soils from basalt and limestone showed higher values of ignition loss than those from the other parent rocks. The pHBC of the soils was ranged from 1.8 to 3.2 $cmol_c\;kg^{-1}\;pH^{-1}$ showing as follows : basalt, limestone > shale, granite-gneiss > granite sandstone.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.4
• /
• pp.265-275
• /
• 2000

The thyroid gland is an interesting endocrine organ where a spectrum of tumors with different behavior arise. At one end of spectrum there is differentiated thyroid carcinoma (DTC) with excellent prognosis, whereas at the other end of the spectrum is anaplastic thyroid cancer which has universally poor outcome. Radioiodine (I-131) therapy has been in use for the treatment of thyroid diseases since 1946. It was introduced by Seidlin et al. 1) Although the use of I-131 has been vouge for a long time, its use in therapy for well differentiated thyroid cancer is still controversial 2). This is because, thyroid cancers (TC) are generally slow growing tumors, with low mortality and normal spans of survival. To record recurrence and mortality, long term follow up studies over a period of two to three decades are needed to establish definite conclusions on the acceptable mode of treatment The incidence of the disease being very low a large number of cases needed to establish a meaningful statistical data is lacking as most published reports feat with small series. Here again in the problem encountered are the differing protocols for treatment with I-131, the indications for treatment which may include or exclude ablation of residual thyroid tissue, cervical nodal and distal metastases. The dosage of I-131 used for ablation of residual thyroid tissue and metastatic disease also vary. The most reliable conclusion regarding I-131 treatment are obtained from studies reported on a large series of patients followed over a period of 2 decades or more from a single institute with a more or less unchanged protocol of management.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.488-493
• /
• 1996

This study was conducted to find out the residual aspect and the effect of quizalofop-ethyl on microorganisms used to control broad-leaf weeds at Yeongok soil series, the experiment field, Chonnam R.D.A. and Namwon soil series, the experiment field, Jeju R.D.A. More than 60 percent of quizalofop-ethyl treated in soil was degraded within 7 days. The degradation of quizalofop-ethyl in soil increased rapidly with incubation temperature. The half-life of quizalofop-ethyl in soil was 15 days(Yeongok series) and 16 days(Namwon series). The number of microorganisms in soil treated with quizalofop-ethyl decreased prominently with incubation time. But the number of Fusarium did not reduce in comparison with that of other soil microorganisms. Therefore, it was thought that the decomposition of quizalofop-ethyl in soil was affected by $Fusarium^2$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.341-344
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But. using, transporting, and keeping of plastic component was happened post-deformation. As time goes by and temperature is changed, the post-deformation causes the problems of exterior design and performance. But, it is difficult to estimate the post-deformation by only thermal deformation analysis. Also, the estimation technique of the pest-deformation must be easily applied to product development and it should be reliable because development time of product is limited. In the paper. the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.39-48
• /
• 2004

The purpose of this paper was to confirm the application of the equation of the soil-water characteristic curve on an unsaturated soil. To this ends, a series of suction test was conducted on the selected 4 kinds of soil which is located in Korea, using the modified pressure extractor apparatus. And it was carried out to analyze the experimental parameters which can describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that the matric suction was varied according to the grain size distribution, amount of fine grain particle and void ratio. Also it was found that the residual volumetric water content was decreased with the void ratio, but the index related air entry value, the soil parameter related water content and the parameter with residual water content were increased with the void ratio. And the application of equation of the soil-water characteristic curve was confirmed for the various conditions and the various state by the comparison between the volumetric water content measured by the experiment and the predicted values.