• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.518-521
• /
• 1999

This paper describes the properties of discharge current and the residual voltage for $^{60}$ C$_{0}$ -${\gamma}$ irradiated cables using in nuclear power generating station. As these properties related with $^{60}$ C$_{0}$ -${\gamma}$ -irradiatiation dose, it is suggested that these properties can be utilized as a index of irradiation degradation. As the ratio of degradation increases, the residual voltage in the initial time range increases and the peak moves to the shorter time. Therefore, I know the degree of radiation degradation from the position of the peak.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.353-358
• /
• 2004

We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{circ}C$, $-60^{circ}C$, $-80^{circ}C$, and $-100^{circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. And there is a difference between shot peened specimen and unpeened specimen. The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. Fatigue crack growth rate of shot peened metal was lower than that of unpeened metal. The compressive residual stress made an impact on tension and compression of the plasticity deformation in fatigue crack plasticity zone. That is. the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.93-98
• /
• 2013

Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. To successfully imprint a nanosized pattern with the thermal NIL, the process conditions such as temperature and pressure should be appropriately selected. This starts with a clear understanding of polymer material behavior during the thermal NIL process. In this paper, a filling process of the polymer resist into nanometer scale cavities during the thermal NIL at the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer. In the simulation, the filling process and the residual layer formation are numerically investigated. And the effects of pressure and temperature on NIL process, specially the residual layer formation are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.784-786
• /
• 2010

Implementation possibility of inline dispersion management (DM) using bi-end schemes, which consist of one single mode fiber (SMF) and two dispersion compensating fiber (DCF) placed at front and rear of SMF, respectively, is investigated for compensating total dispersion accumulated in a span of WDM transmission links. It is confirmed that if net residual dispersion (NRD) is decided to be ${\pm}10\;ps/nm$ then bi-end scheme is effective to compensate for WDM channels with wide launching power range.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.208-217
• /
• 2013

The optimal residual dispersion per span (RDPS) slope is induced through the analyses of the compensation characteristics of the wavelength division multiplexed (WDM) channels depending on RDPS slope in the optical links with a dispersion management (DM) and an optical phase conjugation. The simulation results show that the effective launch power of WDM is more increased and the performance difference between the channels is more decreased as RDPS slope is more increased. The simulation results also show that the effective net residual dispersion (NRD) range is more increased as RDPS slope is more increased, and consequently, it is more advantageous to use the large RDPS slope for implementing the flexible optical links.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.226-233
• /
• 2004

The residual stresses on the surfaces of low carbon 12Cr steels used as a nuclear steam turbine blade material have been studied by controlling the flame hardening surface treatments. The temperature cycles on the surfaces of 12Cr steel were controlled precisely as a function of both the surface temperature and cooling rate. The final residual stress state generated by flame hardening was dominated by two opposite competitive contributions; one is tensile stress due to phase transformation and the other is compressive stress due to thermal contraction on cooling. The optimum processing temperatures required for the desirable residual stress and hardness were in the range of $850^{\circ}C$ to $960^{\circ}C$ on the basis of the specification of GE power engineering. It was also observed that the high residual tensile stress generated by flame hardening induced the cracks on the surfaces, especially across the prior austenite grain boundaries, and the material failure virtually, which might limit practical use of the surface engineered parts by flame hardening.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.147-152
• /
• 2015

The compensation characteristics of WDM channels depending on residual dispersion per spans (RDPS) deviation in optical links with the randomly distributed RDPS for the adaptive configuration are investigated in this paper. Also, the link design rule related with RDPS deviations is proposed, from the viewpoint of the allowable net residual dispersion (NRD). It is confirmed that the effect of compensation for the distorted WDM channels is more increased as RDPS deviation is smaller. Also, it is confirmed that the decrease of the allowable NRD range for the exact eye opening penalty (EOP) is proportional to RDPS deviation. Therefore, the results of this research is expected to be the design reference for the flexible link configuration of long-haul optical transmission links.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.780-783
• /
• 2010

Net residual dispersion (NRD) available to transmit RZ formats with different 24 wavelength as a function of duty cycles of RZ format and residual dispersion per span (RDPS) is induced by controlling precompensation only in 960 km optical transmission links of single mode fiber (SMF) with inline dispersion management (DM) for compensating of accumulated dispersion. It is confirmed that effective NRD range for different 24 wavelengths is gradually broadening as RDPS is more smaller, and as duty cycle of RZ format is more larger in the same RDPS.

• Korean Journal of Materials Research
• /
• v.31 no.3
• /
• pp.172-180
• /
• 2021

In this study, using the plasma spray method, tensile and compression fatigue tests are performed in saline solution to examine the effect of Ti undercoat on corrosion fatigue behavior of alumina-coated specimens. The alumina-coated material using Ti in the undercoat shows better corrosion fatigue strength than the base material in the entire stress amplitude range. Fatigue cracking of UT specimens occurs in the recess formed by grit-blasting treatment and progresses toward the base metal. Subsequently, the undercoat is destroyed at a stage where the deformation of the undercoat cannot follow the crack opening displacement. The residual stress of the UT specimen has a tensile residual stress up to about 100 ㎛ below the surface of the base material; however, when the depth exceeds 100 ㎛, the residual stress becomes a compressive residual stress. In addition, the inside of the spray coating film is compressive residual stress, which contributes to improving the fatigue strength characteristics. A hardened layer due to grit-blasting treatment is formed near the surface of the UT specimen, contributing to the improvement of the fatigue strength characteristics. Since the natural potential of Ti spray coating film is slightly higher than that of the base material, it exhibits excellent corrosion resistance; however, when physiological saline intrudes, a galvanic battery is formed and the base material corrodes preferentially.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.353-360
• /
• 2010

The Kyunggi Bay in mid-west of Korea is a relatively large estuarine system that connects the Han River system with Yellow Sea. Due to macro-tidal range of more than 8 m, the urban estuary shows deep tidal channels and wide tidal flats. Since last 30 years, the coastal development is undergoing, yielding noticeable change in environment. Particularly the tidal flat dynamics are generally accepted as being related with tidal residual flows in this area (Kim et al., 2009). We have estimated the annual variation and vertical structure of residual currents with one-year long observed flows in two major tidal channels of Kyunggi Bay. The moving average method and tidal current harmonic analysis yield nearly the same results on residual flow. The residual flow in Jangbong channel ranges from 20 cm/s in summer to 30 cm/s in winter. It is noticeable that the residual flow in Jangbong channel is flood dominant throughout the year, while the flow in Seokmo channel is ebb-dominant residual flow with current speed range of 20-40 cm/s. Due to the baroclinic response of relatively shallow estuary, significant reduction of energy in bottom layers have been observed, indicating the importance of residual circulation to the tidal flat behavior.