• Journal of Navigation and Port Research
• /
• v.32 no.7
• /
• pp.537-542
• /
• 2008

A lot of cargo accidents occurred due to insufficient securing in the case of marine transportation. If the residual tension of securing rope can be predicted, it will be very useful in the handling of cargo securing work of operators. It was confirmed in the previous study that the fluctuation tension cf securing rope by oscillation could be predicted. In this paper, in order to the prediction of residual tension of securing rope, the experiments were carried out to measure the residual tension of securing rope under the oscillation and cyclic loadings. The residual tensions of two tests were in good agreement with each other. It can be predicted through the cyclic loading test in the estimated fluctuation tension without oscillation test by ship motion simulator.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.89-95
• /
• 2000

In order to achieve effective prediction of residual stresses, the series experiment were carried out and the residual stresses were measured using the backgpropagation algorithm from the neural network and the sectional method. Using the experimental results, the optimal control algorithms using a neural network should be developed in order to reduce the effect of the external disturbances on residual stresses during GMA welding processes. The results obtained from the comparison between the measured and calculated results, showed that the neural network based on backpropagation algorithm can be sued in order to control weld quality. This system can not only help to understand the interaction between the process parameters and residual stress, but also, improve the quantity control for welded structures. The development of the system is goal in this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.399-400
• /
• 2007

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1347-1356
• /
• 2024

Measuring the residual stress in the components in nuclear power plants is crucial to their safety evaluation. The instrumented indentation technique is a minimally invasive approach that can be conveniently used to determine the residual stress in structural materials in service. Because the indentation behavior of a structure with residual stresses is closely related to the elastic-plastic behavior of the indented material, an accurate understanding of the elastic-plastic behavior of the material is essential for evaluation of the residual stresses in the structures. However, due to the analytical problems associated with solving the elastic-plastic behavior, empirical equations with limited applicability have been used. In the present study, the impact of the non-equibiaxial residual stress state on indentation behavior was investigated using finite element analysis. In addition, a new nonequibiaxial residual-stress prediction methodology is proposed using a convolutional neural network, and the performance was validated. A more accurate residual-stress measurement will be possible by applying the proposed residual-stress prediction methodology in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1845-1851
• /
• 2007

Background noise and room reverberation are two causes of degradation in speech in listening situations. Many algorithms developed to enhance reverberant speech. In this paper we propose a dereverberation method for enhancement of speech using modified the linear prediction(LP) residual in reverberant room condition. The proposed dereberberation method based on the fact that the signification excitation of the vocal tract system takes place at the instant of glottal closure in voiced speech. Our method used delay information form each sensor, and we need reverberant signals from 3 sensors. We obtain a new LP residual signal using modified IP residual combination which derived form weighting of the LP residual and the Hilbert transform of LP residual. The nature of the coherently added Hilbert envelop has several large amplitude spikes because of the effects of noise and reverberation. This residual of the clean speech is used to excite the time-varying all-pole filter to obtain the enhanced speech. We achieved simulation of proposed algorithm for performance analysis in reverberation environment. The proposed algorithm improves substantially the quality of reverberant speech.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.454-460
• /
• 2009

In this paper, we propose a residual echo and noise reduction scheme by using linear predictor for hands-free telephony applications. The proposed scheme whitens residual echo by the linear prediction during the non double-talk. But whitened residual echo signal still has speech characteristics. In this scheme, the whitened residual echo signal is more whitened by using the power of the linear prediction error signal and the linear predicted signal. After whitening process, near-end speech and ambient noise is present during double-talk but white noise will appear during non double-talk situation. By linearly predicting again the combined signal of the near-end speech and the whitened signal, the ambient noise is removed. Through computer simulation, it is shown that the proposed method performs well at the side of AIC (acoustic interference cancellation).

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.118-124
• /
• 1998

To use chlorine residual as an surrogate parameter of the water quality change during the transportation in the water distribution system(WDS), the correct prediction model of chlorine residual must be established in advance. This paper shows the procedure and the result of applying the water quality model to the field WDS. To begin with, hydraulic model was calibrated and verified using fluoride as an tracer. And chlorine residual was predicted through simulation of water quality model. This predicted value was compared with the observed value. With adjusting the bulk decay coefficient(kb) and the wall decay coefficient(kw) according to the pipewall environment, the predicted chlorine residual can represent the observed value relatively well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.600-611
• /
• 1994

The purpose of this research is to propose a model for the prediction of residual strength. For this purpose, two-paremeter model based on Caprino's is developed and formulated by the ratio of indentation due to impact and normalized residual strength. The damage zone is considered only as an indentation. Impact tests are carried out on laminated composites by steel balls. Test material is carbon/epoxy laminate. The specimens are composed of $[{\pm}45^{\circ}/0^{\circ}/90^{\circ}]_2$ and $[\pm}45^{\circ}]_4$ stacking sequence and have $0.75^T{\times}0.26^W{\times}100^L(mm) dimension. A proposed model shows a good correlation with the experimental results And failure mechanism due to high impact velocity is discussed on CFRP laminates to examine the initiation and development of damage by fractography and ultrasonic image ststem. The effect of the unidirectional ply position on the residual strength is considered here.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2053-2061
• /
• 1994

The static and fatigue tensile tests have been conduted to predict the fatigue life of 8-harness satin woven and plain woven carbon/epoxy composite plates containing a circular hole. A fatigue residual strength degradation model, based on the assumption that the residual strength for unnotched specimen decreases monotonically, has been applied to predict statistically the fatigue life of materials used in this study. To determine the parameters(c, b and K) of the residual strength degradation model, the minimization technique and the maximum likelihood method are used. Agreement of the converted ultimate strength by using the minimization technique with the static ultimate strength is reasonably good. Therefore, the minimization technique is more adjustable in the determination of the parameter and the prediction of the fatigue life than the maximum likelihood method.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.75-87
• /
• 1985

A review was performed on fatigue life prediction and strength evaluation of shot peened parts. Fatigue strength of machine parts can be improved by shot peening due to compressive residual stresses on such parts. Compressive residual stress cannot be uniquely define by peening intensity. Several measuring methods of residual stress and the principle of hole drilling method are presented. Exploratory measurement of residual stress was performed on the shot peened SM35C plate with the hole drilling method. Fatigue life and failure location of shot peened parts under bending load can be predicted by a damage parameter which is incorporated with material properties, residual stress, and applied stress conditions. Some method are presented to predict the fatigue strength of shot peened parts at any given life. Shot peening gives its full benefit to the notched machine parts of high strength steels.