• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.348-350
• /
• 2018

In this paper, dispersion-managed optimal link configuration with the repetitively artificial-distributed single mode fiber lengths and residual dispersion per span, in which optical phase conjugator placed at midway, is proposed. It is confirmed that the proposed optical link configuration is suitable for expanding transmission length capable to obtain the good performance.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.227-233
• /
• 2019

In long-haul optical communication system consisting of standard single-mode fiber spans and fiber amplifiers, such as the erbium-doped fiber amplifier, performance is deteriorated by signal distortion due to chromatic dispersion and nonlinearity of the fiber. A combination of dispersion management and optical phase conjugation is an effective technique to compensate for the distortion. In an optical link configured by this combination, a dispersion map mainly affects the compensation of the distorted optical signals. This paper proposes new dispersion maps configured by the decaying or expanding distribution of residual dispersion per span (RDPS) in a dispersion-managed link combined with a midway optical phase conjugator. The effect of the proposed dispersion maps on the compensation for distorted 24 channel × 40 Gbps wavelength-division multiplexed signals was assessed through numerical simulation. It was confirmed that all the proposed dispersion maps are most appropriate for the compensation and, furthermore, for the flexibility of link configuration than conventional links.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.579-581
• /
• 2019

In this paper, dispersion-managed optimal link configuration with the growth/decay distribution of accumlative dispersion as the fiber span is increased, in which optical phase conjugator placed at midway, is proposed. It is confirmed that if net residual dispersion set to be -15 ps/nm or 15 ps/nm in the proposed optical link configuration, the best compensation of the distorted wavelength division multiplexed channels will be obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.582-584
• /
• 2019

In this paper, dispersion-managed optimal link configuration with the repetitive distribution of the pairs of residual dispersion per span, in which optical phase conjugator placed at midway, is proposed. It is confirmed that the proposed optical link configuration is better than the conventional dispersion-managed link for the performance improvement of wavelength division multiplexed channels.

• Current Optics and Photonics
• /
• v.5 no.6
• /
• pp.627-640
• /
• 2021

In a free-space coherent optical communication system, wavefront distortion is frequently beyond the correction range of the adaptive-optics system after the laser has propagated through the atmospheric turbulence. A method of residual wavefront correction is proposed, to improve the quality of coherent optical communication in free space. The relationship between the wavefront phase expanded by Zernike polynomials and the mixing efficiency is derived analytically. The influence of Zernike-polynomial distortion on the bit-error rate (BER) of a phase-modulation system is analyzed. From the theoretical analysis, the BER of the system changes periodically, due to the periodic extension of wavefront distortion. Experimental results show that the BER after correction is reduced from 10^-1 to 10^-4; however, when the closed-loop control algorithm with residual correction is used, the experimental results show that the BER is reduced from 10^-1 to 10^-7.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.120-130
• /
• 1995

To analyze the mechanical property and the residual stress in functionally gradient materials(FGMs), disctype TZP/Ni-and TZP/SUS304-FGM were hot pressed using powder metallurgy compared with directly bonded materials which were fabricated by the same method. The continuous interface and the microstructure of FGMs were characterized by EPMA, WDS, optical microscope and SEM. By fractography, the fracture behavior of FGMs was mainly influenced by the defects which originated from the fabrication process. And the defectlike cracks in the FGMs induced by the residual stress have been shown to cause failure. This fact has well corresponded to the analysis of the residual stress distribution by Finite Element Method (FEM). The residual stress generated on the interface (between each layer, and matrix and second phase, respectively) were dominantly influenced on the sintering temperature and the material constants. As a consequence, the interfacial stability and the relaxation of residual stress could be obtained through compositional gradient.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.745-746
• /
• 2016

The compensation effects of the control positions for net residual dispersion (NRD) on the distorted WDM cjannels in dispersion-managed optical links with artificially distributed single mode fiber (SMF) lengths and residual dispersion per span (RDPS) are evaluated.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.437-441
• /
• 2001

The quasi-drugs including nonwoven fabric and gauze were sterilized using ethylene oxide (EO) gas. Residual EO in the quasi-drugs was extracted with water (20 mL of water for 1 g of sample) for 24h at 37$^{\circ}C$. Residual EO was determined using GC. The optimal analytical conditions were as follows : column, Carbowax 20M (1.D. 0.2 mm); mobile phase, helium with 30 mL/min; oven temperature 57$^{\circ}C$, injector temperature 18$0^{\circ}C$, detector temperature 20$0^{\circ}C$. The detection limit for EO was 0.10$\mu$g/mL. When the residual EO extracted from nonwoven fabric and gauze was determined, it took more than 9h to get the lower level than 25 ppm which is the limit value of FDA guideline. When the EO residues, ethylene chlorohydrine (ECH) and ethylene glycol (EG) in the 7 commercially available quasi-drugs were determined, no residual EO, ECH, EG were found from the seven commercially available quasi-drugs analyzed by this method.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1184-1189
• /
• 2018

Pyroprocessing uses various molten salts during electrochemical unit processes. Reaction products after the electrochemical processes must contain a significant amount of residual salts to be separated. Vacuum distillation is a common method to separate the residual salts; however, its high operation temperature may cause side reactions. In this study, a simple rotation technique using centrifugal force was suggested to separate the residual salts from the reaction products at relatively low temperature compared to the distillation technique. When a reaction product container with porous wall rotates inside a vessel heated above the melting point of the residual salt, the residual salt in the liquid phase is separated through centrifugal force. It was shown that the $LiNO_3-Al_2O_3$ mixture can be separated by this technique to leave solid $Al_2O_3$ inside the container, with a separation efficiency of 99.4%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.749-751
• /
• 2009

Optical link design technique for compensating of distorted 40 Gbps ${\times}$ 24 channels WDM signals is researched. The considered optical link consists of optical phase conjugator (OPC) placed at 100 km and 900 km, which are non-midway of total transmission distance, and dispersion management (DM). It is confirmed that optimal net residual dispersions (NRD) are 800 ps/nm and 900 ps/nm when OPC placed at 100 km and 900 km, respectively.