• 한국토양비료학회지
• /
• 제33권3호
• /
• pp.205-211
• /
• 2000

제강슬래그 시용 1년 후 논토양의 토양화학성분 함량, 벼의 생육, 그리고 수량에 대한 제강슬래그의 잔류효과를 밝히려 1997년에 Lim등 (2000)이 설치한 포장 중유정리와 남평의 포장을 그대로 보존하였다가 1998년에 동일품종과 동일재배 방법을 이용하여 벼를 재배하였다. 이앙 후 2주 간격으로 4~6회에 걸쳐 초장과 주당분얼수를 조사하였으며 생육중기와 수확기에 토양 표본을 채취하여 토양의 주요 무기화학성분함량을 조사하였고 수확시 수량 및 수량 구성요소를 조사하였다. 유정리논이나 남평논 모두 비슷한 토양화학성분 함량에서의 변이를 보였다. 제강슬래그 처리구의 토양 pH와 Ca 함량은 7월까지 무처리구에 비하여 유의적으로 높은 값을 보인 후 점차 감소하였으며 제강슬래그 시용 수준이 높을수록 그 지속 기간이 길어지는 경향이어서 토양 Ca의 공급원이나 산성토양개량제로서 제강슬래그의 효과는 2년정도 지속되는 것으로 생각된다. 제강슬래그 $4Mg\;ha^{-1}$ 시용수준의 pH 상승효과는 석회 $2Mg\;ha^{-1}$ 처리보다 다소 높거나 비슷한 경향이었다. $SiO_2$ 함량은 슬래그 시용구에서 무처리구보다 유의하지는 않지만 높은 경향을 보였다. Fe나 Mg 함량은 제강슬래그 시용 1년차에는 무처리구에 비하여 유의적으로 높았으나 2년차에는 점차 무처리구와 비슷한 수준으로 안정되었다. 유정리논 벼의 정조수량은 슬래그 시용수준이 높을수록 증가하는 경향이었다. 석회 $2Mg\;ha^{-1}$ 처리구의 정조수량은 제강슬래그 $4Mg\;ha^{-1}$ 시용수준과 비슷하였다. 최대치를 보인 제강슬래그 $12Mg\;ha^{-1}$ 처리구의 정조수량은 $5,400kg\;ha^{-1}$로 무처리구의 $4,720kg\;ha^{-1}$에 비하여 14%의 증수효과가 있었다. 제강슬래그 $12Mg\;ha^{-1}$ 처리구는 생육초기의 초장생장이 빠르고 생육중기 이후 적정수의 주당 분얼수가 비교적 일정하게 유지되며 수화기의 주당수수는 적은 반면 천립중이 높은 경향이었다. 남평논 벼의 정조수량은 석회 $2Mg\;ha^{-1}$, 제강슬래그 12, 8, $4Mg\;ha^{-1}$, 무처리구의 순으로 많았다. 제강슬래그 처리중 정조수량이 가장 많은 제강슬래그 $12Mg\;ha^{-1}$ 처리의 정조수량은 $7,170kg\;ha^{-1}$로 무처리구의 $6,670kg\;ha^{-1}$에 비하여 8%의 유의적인 증수효과가 있었다. 제강슬래그 $12Mg\;ha^{-1}$ 처리구는 무처리구에 비하여 생육초기의 초장생장은 느린 반면 생육중기 이후의 초장생장이 양호한 생장특성을 보였고 수당립수와 천립중이 유의적으로 많았다.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.148-152
• /
• 2010

Purpose: In treating diabetic foot ulcers, satisfactory vascularity is an essential prerequisite. To improve vascularity, a bypass graft has long been carried out. Recently, however, percutaneous transluminal angioplasty (PTA) has also been tried since the PTA is less invasive than the bypass graft. However, publication demonstrating the improvement of vascularity after the PTA are lacking. Therefore, this study was designed to show usefulness of the PTA in treating vasculopathy of diabetic foot. Materials: and Methods This study included 30 feet of 24 ischemic diabetic foot patients. Inclusion criteria were diabetes (duration > 5 years) and a significant lower extremity ischemia, as determined by a transcutaneous oxygen pressure ($TcpO_2$) < 30 mmHg. The PTA was carried out in 61 arteries. PTA procedure was considered successful, when residual stenosis was less than 30%. The procedure was considered failed when residual stenosis was more than 50%. Residual stenosis between 30% and 50% was considered acceptable. For evaluation of PTA effect, foot $TcpO_2$ and infrared thermography were measured before and 7th day after PTA. Results: Immediately after PTA performed in 61 arteries, 58 and 3 arteries were evaluated as being successful and acceptable, respectively. Before PTA, average foot $TcpO_2$ was $12.6{\pm}8.8$ mmHg and its value was increased to $44.2{\pm}23.9$ on 7th day after PTA (p<0.01). Average skin temperature was $31.8{\pm}1.2^{\circ}C$ before PTA and it was increased to $33.5{\pm}1.1^{\circ}C$ on 7th day after PTA (p<0.01). Conclusion: PTA procedure increases tissue oxygenation of ischemic diabetic feet which do not have wound healing potential due to low tissue oxygenation, to the level of possible wound healing. In addition, PTA increases skin temperature of ischemic diabetic feet which can imply an improvement of peripheral circulation.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.78-85
• /
• 2004

As an ozone contactor, we newly adopted HJLR (High-performance Jet Loop Reactor) for the decolorization of Reactive black 5 and the mineralization of oxalic acid, which has been applied exclusively in biological wastewater treatments and well-known for high oxygen transfer characteristics. The ozonation efficiency for organic removals and ozone utilization depending on the mass transfer rate were compared to those of Stirred bubble column reactor, which was controlled by varing energy input in the HJLR and Stirred bubble column reactor. The results were as follows; first, the decolorization rate of Reactive black 5 in the HJLR reactor was nearly proportional to the increasing $k_La$. When the $k_La$ was increased by 25 % from $13.0hr^{-1}$ to $16.4hr^{-1}$, 30 % of the k' (apparent reaction rate constant) was increased from 0.1966 to $0.2665min^{-1}$ (Stirred bubble column; from 0.1790 to $0.2564min^{-1}$). Ozone transfer was found to be a rate-determining step in decolorizing Reactive black 5, which was supported by that no residual ozone was detected in all of the experiments. Second, the mineralization of oxalic acid was not always proportional to the increasing $k_La$ in the RJLR reactor. The rate-determining step for this reaction was OH(OH radical) production with ozone transfer, because residual ozone was always detected during the ozonation of oxalic acid in contrast with Reactive black 5. This result indicates that the increase of $k_La$ in the HJLR reactor is beneficial only when there are in ozone transfer limited regions. In addition, regardless of $k_La$, the mineralization of oxalic acid was nearly accomplished within 60 minutes. It was interpreted as that the longer staying of residual ozone by whirling liquid in the HJLR reactor contributed to an high ozone utilization(83-94%), producing more OR radicals.

• 한국물환경학회지
• /
• 제20권4호
• /
• pp.313-320
• /
• 2004

In this study, variable characteristics of drinking water and the influences on underground water reservoirs, rooftop water tanks, and service water pipes in the building were assessed. The influence of underground water reservoir material and water capacity on water quality also were assessed. The results are the following as; First of all, the drinking water passing through underground water reservoirs or service water pipes in the building, averagely metal component concentration more increased from percent of 41.3 to percent of 74.2 totally than other items of water quality. On the other hand, both residual chlorine and total solid highly decreased 65.6 percent and 35.3 percent, respectively. Therefore, it was thought that water quality could be getting worse for microorganism re-growth by residual chlorine reduction, and total solid also could be a cause for extraneous matters accumulated in water reservoir. Secondly, the variations on water quality of each stage for water supply system in the building were higher in water service pipes connected from rooftop water tanks to the tap than in underground water reservoirs. In addition to, among of twelve items on water quality, ten items on water quality except dissolved oxygen and residual chlorine increased. Therefore, it was thought that the influence of water service pipes connected from rooftop water tanks to the tap on water quality were higher than other stages of water supply system in the building. Thirdly, in case of materials of underground water reservoir, it was likely that the variation on water quality by stainless steel and concrete materials got some similar. In case of water capacity, the variations on water quality of underground water reservoirs over $1,000m^3$ higher than those under $1,000m^3$. That reasons was likely that the retention time(49.72 hours averagely) of underground water reservoirs over $1,000m^3$ was two times longer than it of those under $1,000m^3$(23.37 hours). Therefore, it was thought that the influence on water quality by materials were some similar, but in case of water capacity, the influence of underground water reservoirs were higher.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.94.2-94.2
• /
• 2010

Indium tin oxide (ITO) Thin films were grown on Non-alkarai glass Substrates by PVD method and Subsequently Subjected to ($100^{\circ}C-350^{\circ}C$) Thermal Annealing (TA) In Nitr Oxygen ambinent. Most of all, The effect of TA treatment on the structural properties were studied by using X-Ray diffraction and atomic force microscopy, while optical properties were studied by UV-Transmittance measurements. After TA treatment, the XRD spectra have shown an effective relaxation of the residual compressive stress, As a result, XRD peaks increase of the intensity and narrowing of full width at half-maximun (FWHM). In addtion The microstructure, The surface morphology, the optical transmittance changed and improved, and we investigated The effects of temperature, Time and atmosphere during the TA on the structural and electrical properties of the ITO/glass on TA at $300^{\circ}C$. As a results, the films are highly transparent (80%～89%) in visible region. AFM analysis shows that the films are very smooth with root mean square surface roughness 0.58nm -2.75nm thickness film. It is observed that resistivity of the films drcreases T0 $1.05{\times}10^{-4}{\Omega}cmt$ $6.06{\times}10^{-4}{\Omega}cm$, while mobility increases from $152cm^2/vs$ to $275cm^2/vs$.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.212-218
• /
• 2017

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classifying with an ultrasonic wet-magnetic separation unit to get high pure nano-sized particles. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders resulted in producing the powders with average size of 800 nm. The addition of a surfactant during the wet-magnetic separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 800 nm size were 3651 A/m, $53.92Am^2/kg$ and $4.0Am^2/kg$, respectively.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.33-40
• /
• 2010

In this research, the effects for surface Improvement of plasma ion implanted carbide endmill tools were observed by measuring cutting forces and tools wear affecting surface roughness in high speed cutting. From the 2nd ion mass analysis, the oxidation layer was found to be built up by sputtering. The residual gas contamination of oxygen was found to be contained impurities in nitrogen gas. The plasma implanted ion was found to be spreaded, especially the nitrogen was implanted up to 150nm depth as impressed voltage and ion implanting time. It is analyzed as bring surface improvement by spreading deeply forming oxidation on surface. The factors in Analysis of Variance(ANOVA) about mutuality cause reference of cutting force. The cutting force Fx is affected by the interaction of spindle rpm and federate, the cutting force Fy is influenced by spindle rpm and time injected ion, and cutting force Fz is affected by the interaction of impressed voltage and feedrate. Also, it was found that the cutting forces of implanted tools become lower and the surface roughness is improved by the effect of nitrogen according to the implantation.

• Toxicological Research
• /
• 제11권1호
• /
• pp.57-62
• /
• 1995

To investigate the ultrastructural changes of kidney and clarify to a cause of its changes in lead intoxicated rats, the 0.5% lead acetate administed orally to the rats and those were sacrifled at 2 day, 1, 2, 4, 6 and 8 week after the treatment of lead acetate. Each extirpated kidney was histopathologically examined under the electron microscopy and histochemical examination was also carried out. Concomitantly, the activity of free radical metabolizing enzyme was determined. The blood levels of lead concentration showed a gradual increase from the first group reaching the plateau at the one or two week group with the slightly decreasing value throughout the whole course of the experiment. And the urinary ALA concentration showed a gradual increase from the first group to the 8 week group. In the kidney tissue of rat sacrified at 6 week, the proximal tubular cells showed dilatation of endoplasmic reticulum, mitochondrial swelling, increased numbers of secondary lysosomes and myelin figure-like residual bodies on electron microscope and oxygen free radicals are identified by histochemistry on light microscope whereas there were no differences in the activity of catalase and glutathione peroxidase between the lead acetate treated group and control group. But the activity of xanthine oxidase was more increased in lead acetate treated rats than control group. Furthermore, the superoxide dismutase activity was significantly increased in the experimental group than the control group. In conclusion, it is assumed the kidney damage in lead intoxicated rat may be induced by free radicals.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.177-178
• /
• 2015

Sediments play a major role in determining pollution pattern in aquatic systems and reflecting the pollutant deposition. In the present study analysis the depth effect of organic pollutants and heavy metals using slow release biostimulant ball (BSB) in coastal sediment. BSB size fixed at 3cm, depth varied from 0cm to 10cm depth and 1 and 3 month interval period was carried out for the study. The organic pollutants of chemical oxygen demand, total solids and volatile solids were significantly changed at the surface sediment (0cm)in 1 month and 3 month interval time using BSB. In contrast, sediment depth increase upto 10cm the reduction percentage decrease like to control. Vertical distribution of heavy metals are not consistent from the surface layer toward the bottom layers. Heavy metals fractions were significantly changes, the exchangeable fraction was reduced and other organic and residual fractions were stabilized percentage are increased. This finding concluded BSB is effective for reduce organic pollutants, heavy metals stabilization from the contaminated sediment.

• 자원환경지질
• /
• 제28권2호
• /
• pp.93-108
• /
• 1995

The Bobae sericite deposit occurs in rhyodacite of the Cretaceous volcanogenic sedimentary rocks, Upper Yucheon Group, in the western part of Pusan. The alteration zones are divided into the phyllie and prophylitic zone based on the mineral assemblages. The phyllic zone is subdivided into three subzones; Andalusite-Pyrophyllite, Sericite and Albite subzones. Oxides vs. $Al_2O_3$ contents show variations corresponding to mineral assemblage in each alteration zone. On the basis of bulk chemical compositions, it was found that $SiO_2$ increases in the Andalusite-Pyrophyllite subzone and $K_2O$ in the Sericite subzone. The oxygen, hydrogen and sulfur isotope analysis indicates that the fluids were originally derived from the residual magmatic solution. It has been mixed with abundant meteoric water later. The ore-forming temperatures obtained from sericite (illite) geothermometer are about $250{\sim}350^{\circ}C$. Considering the phase stability relation, PoT conditions of the andalusite-pyrophyllite subzone were estimated to be less than 0.5 kb and almost $400^{\circ}C$, respectively. The K-Ar ages of sericites indicate that the clay deposit is genetically related to the Cretaceous-Paleogene Masan Hornblende-Biotite Granite.