• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.17-20
• /
• 2015

Coated conductor is an important candidate for power cable applications due to its high current density. Even for DC power cable transmission, we must study the transport properties of HTS tapes after slow and fast discharge. In order to evaluate relation of the magnetic field with applied current we developed a scanning magnetic field measurements system by employing a Hall probe. This work presents the measurements of the magnetic fields above a coated conductor by varying applied current pattern. In the work, a transport current of 100 A, less than the critical current, is applied to YBCO coated conductor. We measured the residual magnetic field distributions after cut off the transport current with slow and fast operations. The results show differences of the magnetic field profiles and the corresponding current profiles by an inverse solution from the magnetic field measurement between these two operations because of the hysteresis of coated conductor excited by the transport current.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.619-629
• /
• 2020

In current study, surface/interface effects for pull-in voltage and viscous fluid velocity effects on dimensionless natural frequency (DNF) of fluid-conveying piezoelectric nanosensor (FCPENS) subjected to direct electrostatic voltage DC with nonlinear excitation, harmonic force and also viscoelastic foundation (visco-pasternak medium and structural damping) are investigated using Gurtin-Murdoch surface/interface (GMSIT) theory. For this analysis, Hamilton's principles, the assumed mode method combined with Lagrange-Euler's are used for the governing equations and boundary conditions. The effects of surface/interface parameters of FCPENS such as Lame's constants (λI,S, μI,S), residual stress (τ0I,S), piezoelectric constants (e31psk,e32psk) and mass density (ρI,S) are considered for analysis of dimensionless natural frequency respect to viscous fluid velocity u̅f and pull-in voltage V̅DC.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.478-482
• /
• 1995

The iron-based Metglas 2605S3A amorphous alloy ribbons are annealed at $435^{\circ}C$ for various periods from 5 to 210 min, and the effect of annealing is investigated on the dc magnetic properties of the ribbon. Typical square-type hysteresis loops are observed for the ribbons annealed fo 5 min, indicative of the nearly complete removal of residual stresses which are produced during melt-quenching. As the annealing time increases, the coercivity increases and the shape of hysteresis loops transforms to round type and finally to sheared one at the longest annealing time of 210 min. These results may be explained by the formation of clusters with chemical shortorder and very fine crystallites (at the annealing time of 210 min), and the diffusion-induced stresses during the formation of the clusters. For the samples annealed for 5 min, very good dc properties of the squareness ratio, coercivity and maximum permeability are observed, but, rather unexpectedly, the initial permeability is found to be very low. These results are considered to be due to a simple domain structure consisting of very small number of $^{\circ}$ domains.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.101-104
• /
• 2005

Recently, competition between LC modes for LC TVs becomes high. In this paper, status of each mode is briefly reviewed with commenting on its electro-optic characteristics and possible application fields. Further, to understand effects of carbon nanotubes (CNTs) dispersed in nematic liquid crystal on electro-optic characteristic and orientation of the LC, CNT-doped NLC cells are made and evaluated. The hysterisis studies of voltage-dependent capacitance show that the amount of residual dc is greatly reduced due to ion trapping by CNTS.

• Journal of the Korean institute of surface engineering
• /
• v.21 no.1
• /
• pp.19-27
• /
• 1988

The principe and practice of pulse plating, and prospect in the future on pulse plating are reviewed. Some of the advantages of pulse pulse plating are detailed as compared with DC plating. The advantages of pulse plating are summarized as follows: 1)smooth and fine grained deposits 2) reduction in hydrogen embrittlement of deposits 3) reduction of residual stress and microcracks in the deposit 4) improvement of physical properties 5) uniform alloy composition through the deposit thinkness 6) improved thrower and adhesion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.376-376
• /
• 2007

In Liquid Crystal Display (LCD) manufacturing, the organic over coat materials over coat materials for insulation layer of color filter with acryl ate was widely used. Therefore, we approach that the organic overcoat material can use to insulation layer for color filter and liquid crystal (LC) alignment layer in this research. The LC aligning capabilities was successful stuided for the first time. The organic overcoat layer and polymer layer was coated by spin-coating. In order to characterize the LC alignment, electric optic and residual DC and atomic force microscopy (AFM) image was used. The good LCD aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. Also the good LCD alignment capabilities treated polymer on surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1800 eV can be achieved. Comparing electro-optical characteristics between the Polyimide (PI) and the overcoat, the resultant transmittance of the overcoat considerably matched that of the PI and the residual DC also exhibited similar features with the PI.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1054-1057
• /
• 2004

The nitrogenated diamond-like carbon (NDLC) exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) films. These diamond-like transparent properties in NDLC come in a material consisting of $sp^2$-bonded carbon versus the $sp^3$-carbon of DLC. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. Liquid crystal (LC) alignment capabilities with ion beam exposure on NDLC thin films and electro-optical (EO) performances of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) with oblique ion beam exposure on the NDLC thin film surface were studied. An excellent uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the NDLC thin films was observed. In addition, it can be achieved that the good EO properties of the ion-beam-aligned TN-LCD. Finally, we will present the residual DC property of the ion-beam-aligned TN-LCD on the NDLC thin film surface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.119-126
• /
• 2012

H.264/AVC can use three transforms depending on types of residual data which are to be coded. H.264/AVC always executes $4{\times}4$ DCT transform. In $16{\times}16$ intra mode only, $4{\times}4$ Hadamard transform for luma DC coefficients and $2{\times}2$ Hadamard transform for chroma DC coefficients are performed additionally. Quantization is carried out to achieve further data compression after transform coding is completed. In this paper, the hardware implementation for DCT transform, Hadamard transform and quantization is studied. Especially, the proposed architecture adopting the pipeline technique can output a quantized result per clock cycle after 33-clock cycle latency. The proposed architecture is coded in Verilog-HDL and synthesized using Xilinx 7.1i ISE tool. The operating frequency is 106MHz at SPARTAN3S-1000. The designed IP can process maximum 33-frame at $1920{\times}1080$ HD resolution.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.2
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.24-28
• /
• 2009

In this study, we investigated whether the anhysteretic demagnetization process would be applicable to remove a complicated magnetization of a steel tube as a part of the experimental earlier study for a deperming of naval vessel. The magnetic tube used in this study was a 10cm-long and 1cm-diameter steel tube, and magnetized with a E-shape ferrite core to form a nonuniform magnetization in it. In the anhysteretic demagnetization process, a dc magnetic field applied along the longitudinal direction of the tube decreased from ${\pm}$3kA/m to zero-field with the step of ${\pm}$300A/m. At the same time, an ac bias magnetic field with the frequency of 60Hz and the field intensity of 300A/m was excited along the circumstantial direction of the tube. It was found that the anhysteretic process was useful to demagnetize a small-object like a steel tube from the experimental results showing the residual magnetization reduced over 90%.