• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.109-117
• /
• 2009

To set up the outstanding and scientific dyeing method in making the condensed liquid of pigment obtained from onion skins and the improved reliability, the following basic experiments were performed. The pigment was extracted in the distilled water at $70^{\circ}C$ and methanol at room temperature and then it was analyzed with LC/MS/MS system (Liquid Chomatography/Mass Spectroscopy/Mass Spectroscophy, LIQ Advantage Max, Thermo Finnigan, USA) for its pigmental characteristics. The unrefined silk and refined silk were dyed by making use of the derived pigment in such a way. The chromameter (CR-200, Minolta, Japan) was used to measure the change in surface color in textiles to be dyed by the extracting condition and the color difference ${\Delta}E$ was determined according to the color difference formula CIE LAB through measuring the psychometric lightness L* and chromaticity coordinates a* and b*.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1113-1116
• /
• 2020

In the EH-WSN(Energy Harvesting Wireless Sensor Network), the routing protocol must consider the power condition of nodes such as residual power and energy harvesting rate. Many EH-WSN studies have emphasized the power aspect and make the urgency of sensed data less important. However, in applications such as environmental monitoring, stability and latency become more important issues than power efficiency for urgent data. In this paper, we designed a routing protocol that can set path according to data urgency. To this end, relay nodes are determined considering the urgency of date. Nodes with poor power do not participate in routing when normal data is generated, so that urgent data can be transmitted reliably with low latency. The performance of the proposed routing protocol is analyzed by computer simulation.

• Electrical & Electronic Materials
• /
• v.11 no.11
• /
• pp.1-8
• /
• 1998

This paper presents an arificial neuro-fuzzy technique based prtial discharge (PD) pattern classifier to power system application. This may require a complicated analysis method employ -ing an experts system due to very complex progressing discharge form under exter-nal stress. After referring briefly to the developments of artificical neural network based PD measurements, the paper outlines how the introduction of new emerging technology has resulted in the design of a number of PD diagnostic systems for practical applicaton of residual lifetime prediction. The appropriate PD data base structure and selection of learning data size of PD pattern based on fractal dimentsional and 3-D PD-normalization, extraction of relevant characteristic fea-ture of PD recognition are discussed. Some practical aspects encountered with unknown stress in the neuro-fuzzy techniques based real time PD recognition are also addressed.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.679-683
• /
• 2003

Strawberries were fermented for their effective value added product. In alcohol fermentation of strawberries, alcohol content was maximum value (9.22% ) under the condition of 16.32$^{\circ}$Brix of initial sugar concentration, 53.03 hr of fermentation time and 28.8$^{\circ}C$ of fermentation temperature. Acetic acid content revealed minimum value (0.49%) under the condition of 13.18$^{\circ}$Brix of initial sugar concentration, 50.99 hr of fermentation time and 24.96$^{\circ}C$ of fermentation temperature. Residual sugar content revealed minimum value (3.97$^{\circ}$Brix) under the condition of 15.00$^{\circ}$Brix, 52.00 hr and 26.0$0^{\circ}C$. The optimum conditions for each alcohol fermentation were 14$^{\circ}$Brix, 50 hr and 28$^{\circ}C$.

• Applied Biological Chemistry
• /
• v.35 no.6
• /
• pp.475-478
• /
• 1992

Series of study were conducted to investigated the condition of wet polishing and quality of wet polished rice. The optimal condition for wet polishing was determined to be 0.5% added water after removal bran layer of 95% by normal milling. Its polishing yield was 0.75% lower than normal polishing, and the moisture content of wet and normal polished rice was the same, but the whiteness of wet polished rice was higher by 3.5% than that of normal polished rice and the lightness was very good. The total solid as washing wet polished rice in water and the total solid in residual liquid of cooked wet polished rice was about 0.30 and 2% lower than those of normal polished rice, respectively. The storability of wet polished rice was better than that of normal polished rice.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.97-103
• /
• 2011

The residual patterns of azoxystrobin and cyenopyrafen were investigated to compare the differences between rainshield and plastic house conditions of the grapes. Initial residue concentrations of azoxystrobin were $0.54\;mg{\cdot}kg^{-1}$ under rainshield condition and $0.9\;mg{\cdot}kg^{-1}$ under plastic house condition. And cyenopyrafen was 0.55 and $0.64\;mg{\cdot}kg^{-1}$ respectively. Biological half-life of azoxystrobin was calculated as 13.28 days under rainshield and 15.58 days under plastic house condition. And cyneopyrafen was 7.99 and 12.65 days, respectively. In comparison with two different cultivation conditions, pesticides in/on the grape were decomposed more faster under plastic house than rain shield conditions.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.13-23
• /
• 1999

In this research, 3-hydroxypyridine(2-HP) metabolic ability of starving Arthrobacter crystallopoietes cell and the effect of humic acid on the metabolism of this starving cell were evaluated. 2-HP metabolic ability of exponential phase cell (acclimated cell) was much higher than that of lag phase cell (unacclimated cell) during starvation period. After 3 days of starvation, 2-HP half-life of the acclimated cell was 14 hours and that of the unacclimated cell was 46.5 hours. Humic acid enhanced the stability of 2-HP monooxygenase of starving co]1 and, after 2 days of starvation, the residual activity rate of this enzyme of the microbial cell starved in humic acid solution was 12% while the rate for control condition was 1.5%. After 14 days of starvation, 2-HP half-life for control condition was 43 hours and that for humic acid condition was 1.25 hour.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.