• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.103-110
• /
• 2019

In order to reduce the accidents occurring at construction sites, it is necessary to approach with harmonious measures considering various aspects such as systems, training, facilities, and protection equipments. Suggestion of safe construction method can be a good alternative. In the previous study, the half-depth precast deck with RC rib panel was proposed as an alternative method for safe bridge deck construction, and the performance required by the design code was verified through a four-point bending test. But the actual bridge deck is subjected to the repetitive action of the wheel load rather than the bending condition due to the four-point load. In this study, fatigue test was performed by repeating the wheel load $2{\times}10^6$ cycles to verify the safety of the half-depth precast deck with RC rib panel under actual conditions. As a result, fatigue effect due to repetition of wheel load was not significant in terms of serviceability such as crack width and deflection. In the residual strength test conducted after the fatigue test, the half-depth precast deck with RC rib panel failed by punching shear which is typical failure mode of bridge decks and the residual strength was similar to the punching strength of the RC and PSC bridge decks in spite of the fatigue effects.

• International Journal of High-Rise Buildings
• /
• v.7 no.4
• /
• pp.327-342
• /
• 2018

Geopolymer concrete (GPC), which is recognised as an environmentally friendly alternative to ordinary Portland cement (OPC) concrete, has been reported to possess high fire resistance. However, very limited research has been conducted to investigate the behaviour of geopolymer concrete-filled steel tubular (GCFST) columns at either ambient or elevated temperatures. This paper presents the compressive test results of a total of 15 circular concrete-filled steel tubular (CFST) stub columns, including 5 specimens tested at room temperature, 5 specimens tested at elevated temperatures and the remaining 5 specimens tested for residual strength after exposure to elevated temperatures. The main variables in the test program include: (a) concrete type; (b) concrete strength; and (c) curing condition of geopolymer concrete. The test results demonstrate that GCFST columns have similar ambient temperature behaviour compared with the conventional CFST counterparts. However, GCFST columns exhibit better fire resistance than the conventional CFST columns. Meanwhile, it is found that the GCFST column made with heat cured GPC has lower strength loss than other columns after exposure to elevated temperatures. The research results highlight the possibility of using geopolymer concrete to improve the fire resistance of CFST columns.

• Journal of Surface Science and Engineering
• /
• v.54 no.3
• /
• pp.133-138
• /
• 2021

Ternary Ti-X-N coatings, where X = Al, Si, Cr, O, etc., have been widely used for machining tools and cutting tools such as inserts, end-mills, and etc. Ti-Al-N-O coatings were deposited onto silicon wafer and WC-Co substrates by a cathodic arc evaporation (CAE) technique at various negative substrate bias voltages. In this study, the influence of substrate bias voltages during deposition on the microstructure and mechanical properties of Ti-Al-N-O coatings were systematically investigated to optimize the CAE deposition condition. Based on results from various analyses, the Ti-Al-N-O coatings prepared at substrate bias voltage of -80 V in the process exhibited excellent mechanical properties with a higher compressive residual stress. The Ti-Al-N-O (-80 V) coating exhibited the highest hardness around 30 GPa and elastic modulus around 303 GPa. The improvement of mechanical properties with optimized bias voltage of -80 V can be explained with the diminution of macroparticles, film densification and residual stress induced by ion bombardment effect. However, the increasing bias voltage above -80 V caused reduction in film deposition rate in the Ti-Al-N-O coatings due to re-sputtering and ion bombardment phenomenon.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.110-122
• /
• 1996

Finite element analysis tool was developed to analyze the casting process. Generally, casting process consists of mold filling and solidification. Both filling and solidication process were simulated simultaneously to investigate the effects of process variables and to predict the defect. At filling process, thermal coupling was especially considered to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simullation of the actual casting processes. At mold filling process, Lagragian-type finite element method with automatic remeshing scheme was used to find the material flow. A perturbation method with artificial viscosity is adopted to avoid numerical instability in low viscous fluid. At solidification process, enthalpy-based finite element method was used to solove the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidification time, position of solidus line, liquidus line and thermal residual stress are found. Through the study, the importance of combined analysis has been emphasized. Finite element tools developed in this study will be used process design of casting process and may be basic structure for total CAE system of castings which will be constructed afterward.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.52-63
• /
• 1998

A novel quinolineoxadiazoles, substituted the carboxylic acid group with 1,2,4-oxadiazole radicle, of KSC-16960 and related compounds were evaluated to examine the herbicidal activity, crop injury and residual effect of after-vegetable crops compared with those of quinclorac (3,7-dichloro-8-quinolinecarboxylic acid), of which use is now banned because of its residual activity to some succeeding vegetable crops. KSC-16960 showed 2- and 3-leaf stages of barnyardgrasses effectively controlled by more than 95 and 90%, respectively, at a rate of 6.25 g/ha. The dose of KSC-16960 controlled 4- and 5-leaf stages of barnyardgrasses by more than 90% were found to be 50 g and 100 g/ha, respectively. The selectivity of KSC-16960 between direct-seeded rice and barnyardgrass was approximately 2-fold higher than that of quinclorac when they were treated to the soil. The selectivity indices of KSC-16960 and of quinclorac between 1-leaf stage of direct seeded rice and 5-leaf stage of barnyardgrass were 44 and 23, respectively, and those between 1-leaf stage of direct seeded rice and 4-leaf stage of barnyardgrass were almost 2-fold higher. Application of KSC-16960 with bentazone exhibited an additive controlling effect on several weed species, but that of quinclorac exhibited an antagonistic effect. With pyrazosulfuron-ethyl, on the other hand, both application of KSC-16960 and quinclorac showed additive interactions. Under a greenhouse condition, the residual activity of KSC-16960 to succeeding tomato plants was approximately 4-fold lower compared to that of quinclorac. KSC-16960 could be substituted for quinclorac, if it will be made some more improvement for reducing residual activity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.3
• /
• pp.179-189
• /
• 2014

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. An electrolytic reduction of the pyroprocessing is a process to reduce oxides into metals using LiCl as an electrolyte and requires a post-treatment process due to the inclusion of residual salt in porous metal products. A vacuum distillation has been adopted for various molten salt systems and could be applied to the post-treatment process of the electrolytic reduction. The residual salt in the metal products includes LiCl, alkali chlorides, and alkaline earth chlorides. In this paper, vapor pressures of chlorides have been estimated and the composition changes on the residual liquid during the vacuum distillation process have been calculated. A model combining a material balance and vapor-liquid equilibrium relations has been proposed under a constant vapor discharging flow rate and liquid composition changes have been calculated using the vapor pressures with respect to a dimensionless time. The behaviors have been compared with temperature and molten salt composition changes to simulate the process condition variation. The distillation of the residual salt has been dominated by LiCl which is the main component of the salt and CsCl of which vapor pressure is higher than that of LiCl would be readily removed. RbCl exhibits similar vapor pressure with LiCl and maintains its composition. However, $SrCl_2$ and $BaCl_2$ of which vapor pressures are much lower than that of LiCl are concentrated with time and expected to be possibly precipitated during the distillation when the initial compositions are increased.

• Korean Journal of Environmental Biology
• /
• v.20 no.3
• /
• pp.268-275
• /
• 2002

Seasonal variation in reproductive condition of the Pacific oyster Crassostrea gigas was investigated from a suspended cultured oyster population in Gosung Bay, South Korea using histological techniques, Gametogenesis of oysters initiated in February when water temperature reached 11 to $13^\circ{C}$. Increase in oocyte size and the number resulting in follicle expansion was observed from March to May First spawning of oysters observed in mid Jun when the surface water temperature reached 22 to $25^\circ{C}$. Spawning activity of oysters extended from mid June to late September with two marked spawning peaks in June and August. Most oysters collected from October to December exhibited few residual eggs in packed follicles exhibiting a typical spent condition. No gametes were observed from December to February from oysters collected in the Bay. Gonadal development of oysters in the Bay seemed to follow a seasonal fluctuation in environmental conditions such as water temperature and food availability in the water column. Spawning of oysters in late June was in part associated with sudden drop in salinity due to vast amount of freshwater input in the Bay after the summer flooding. Sex ratio of oysters was 59.5% male and 39.8% female. Less than 1 percent (0.6%) of the oysters examined were hermaphrodite; few eggs were observed in testis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2654-2663
• /
• 2000

Steam turbine rotors are the most critical and highly stressed components of a steam power plant; therefore, the life expectancy of the turbine rotor is an important consideration for the safety of a steam power plant. The objective of this paper is to develop a life estimation program for turbine rotors for all possible operating conditions. For this purpose, finite element analysis was carried out for four normal operating modes (cold, warm, hot and very hot starts) using ABAQUS codes. The results are made into databases to evaluate the life expenditure for an actual operating condition. For any other possible abnormal operating condition, the operating data are transmitted to the server (workstation) through a network to carry out finite element analysis. Damage estimation is carried out by transmitting the finite element analysis results to the personal computer, and then the life expectancy is calculated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1056-1063
• /
• 2007

Recently, there has been a growing consumer interest in the amount of noise produced by household electrical appliances. The designer of the product must identify the source of the noise, in order to reduce the noise. In the case of a household electric appliance such as the washing machine, there is consumer's complaint about the noise that is generated during the dehydrating condition. Because of several noise sources combined each other. It is difficult to identify the noise sources that contribute to the noise output. Multi-Dimensional Spectral Analysis (MDSA) is a method that can remove the correlation between different noise sources, and it expresses the key contributing factor as a unique output. This study utilized MDSA to analyze the contribution of each input in the noise output during the dehydrating condition.