• Title/Summary/Keyword: reservoir temperature

Search Result 414, Processing Time 0.029 seconds

Integrated Rotary Genetic Analysis Microsystem for Influenza A Virus Detection

  • Jung, Jae Hwan;Park, Byung Hyun;Choi, Seok Jin;Seo, Tae Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.88-89
    • /
    • 2013
  • A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

  • PDF

WASP7 모형을 이용한 임하호 수질모의에 관한 연구 (The Research about the Water Quality Prediction at Imha Reservoir Using a WASP7 Model)

  • 안승섭;서명준;정도준;박노삼
    • 한국환경과학회지
    • /
    • 제17권6호
    • /
    • pp.611-621
    • /
    • 2008
  • This study intends to provide the necessary basic data needed for predicting the water quality and examining changes in water quality on the basis of the hydrological changes: an outflow or the character of a flow by investigating the interaction of the parameters through the estimation of optimal parameters need for predicting the water quality of the dam basin and the sensitivity among those estimated parameters. Im-Ha Dam in the upstream area of the Nakdong River was selected for analysis, and the water quality survey data necessary for parameter estimation was based on the monthly water quality data (water temperature, BOD, T-N and T-P) between December 1, $2005{\sim}$November 31, 2006. K1C(the saturated growth rate of plant plankton), K1RC (endogenous respiratory quotient of plankton), KDC(deoxidized ratio), K71C(minealized ratio of dissolved organic phosphorus), K83C(mineralized ratio of dissolved organic nitrogen) have been considered as the factors of the water quality performed in this water quality simulation, that is, the most effective parameters on BOD, T-N and T-P. In the result of the analysis of the sensitivity, KDC(deoxidized ratio) was the most sensitively reacted parameter on BOD and it was K71C(mineralized ratio of dissolved organic phosphorus) and K83C(mineralized ratio of dissolved organic nitrogen) on T-N and T-P. It is considered that it will be possible to apply the most optimal parameter to an analysis of the water quality simulation at Im-Ha Ho basin in the goal year by examining the interaction of the parameters through the parameters sampling which are able to applicable to prediction of the water quality and the analysis of the its sensitivity, in the future, also the analysis on the basis of the hydrological conditions: an outflow or the character of a flow will be needed.

무등산 주요 탐방로에서 테르펜 분포특성 연구 (A Study on the Distribution Characteristics of Terpene at the Main Trails of Mt. Mudeung)

  • 이대행;김민희;박옥현;박강수;안상수;서희정;진승현;정원삼;강영주;안기완;김은선
    • 한국환경보건학회지
    • /
    • 제39권3호
    • /
    • pp.211-222
    • /
    • 2013
  • Objectives: A great number of people visit forests for their bountiful healing factors. We investigated the quantity of terpene and analyzed the correlations with meteorological and environmental factors at Mt. Mudeung in order to support public health. Methods: The terpene amounts were investigated along 11 main trails using stainless steel tube packed by Tenax TA (150 mg) and Carbopack B (130 mg) during March to November 2012. Terpene amounts of 20 species (${\alpha}$-pinene, camphene, etc.), and meteorological and environmental factors were investigated in the field. Results: Terpene of 16 species was released from the forest and total terpene amounts were 2,080 pptv at the site of Chamaecyparis obtusa, the highest among 11 sites, nearby the first reservoir on Mt. Mudeung. Terpene concentrations in the forest were nine to 23 times higher than found in urban areas. Total terpene amounts had positive correlations with temperature, humidity, carbon dioxide and oxygen (p<0.01) with $R^2$ of 0.345, 0.369, 0.591, 0.145, respectively, from April to July. Wind speed and solar radiation in the forest had a negative correlation with terpene amounts and showed statistical insignificance with p-values of 0.118 and 0.233, respectively. Conclusions: This study suggests that the amounts of terpene around Mt. Mudeung are indeed higher, so visitors may enjoy a therapeutic walk in the forest with a healing effect. These results showed the forest was very effective for improving human health.

유전알고리즘을 이용한 WASP7 모형의 보정과 상수원 저수지에 대한 적용 (Calibration of WASP7 Model using a Genetic Algorithm and Application to a Drinking Water Resource Reservoir)

  • 배상목;조재현
    • 환경영향평가
    • /
    • 제23권6호
    • /
    • pp.432-444
    • /
    • 2014
  • 수동보정으로 수질모델링을 수행할 때는 연구자의 주관이 개입되어 해당 연구의 객관성에 영향을 줄 소지가 있기 때문에 자동보정에 관심을 갖게 된다. 본 연구에서는 WASP7 모형의 수질 매개변수 보정을 위해서 유전알고리즘과 영향계수법을 적용하였다. 이 방법에서는 대상 호수의 BOD, DO, 인, 질소, 식물성플랑크톤에 큰 영향을 미치는 매개변수를 대상으로 최적 수질 매개변수를 산정한다. 성층현상이 일어나는 대상 호수의 수온과 수리적 특성을 정확하게 계산하기 위해 3차원 수리모형인 EFDC를 적용하였고, 이 모형의 결과는 본 연구에서 이용한 호수수질모형인 WASP7 모형과 연동해서 적용되었다. EFDC와 WASP7의 적용을 위해 동일한 격자망을 구성하였다. WASP7의 보정결과 5개 보정 대상 수질변수 중에서 DO, TN, CBOD에 대한 실측치와 계산치의 상대오차제곱합은 비교적 적었다. 따라서 이 세가지 수질에 대한 보정은 적절히 수행되었으나, TP와 Chl-a에 대한 보정결과는 비교적 정확도가 낮았다.

저수지에서의 수온 모니터링 (Monitoring of Water Temperature at the Reservoir)

  • 이현석;정선아;이용곤;정남정
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.864-868
    • /
    • 2006
  • 댐과 양쪽의 산 능선에 감싸이어 있는 저수지의 모습은 이렇다할만한 특징을 찾아보기가 쉽지 않다. 우리나라의 각지에 건설되어진 다목적댐으로 인해 형성되어진 저수지들을 둘러보아도, 역시 주변의 지형을 자세히 비교해 보기 전에는 구별하기 힘들만큼, 그만큼 외관상으로는 닮아있다. 하지만, 이러한 저수지들이 보여주는 자연현상은 실제로는 너무나도 다양하다. 잔잔한 물 표면의 안쪽에 저마다 눈에 보이지 않는 특성들을 감추고 있으리라 추측해 본다. 하지만, 그 특성을 정량적으로 파악 하기란 좀처럼 쉽지가 않다. 영양염분의 과다 유입으로 부영양화가 초래되면 여기저기서 녹조를 발생 시키고, 또한 홍수나 상류 유역의 토사 붕괴로 인하여 좀처럼 침강되지 않는 미세 입자가 과다 유입되면, 1년 내내 누런 탁수로 몸살을 앓는다. 이처럼, 인간의 눈에 보여 지는 저수지는 '매우 닮은 모습에서 너무나 다른 모습'으로 '계단의 층계변화'와 같은 극단적인 상태 변화만이 파악되어진다. 최근에 들어서, 장비의 발달과 환경에 대한 관심의 고조로 한 달에 한번 많으면 일주일에 한 번씩 현장 조사를 수행하고는 있지만, 지속적으로 저수지를 파악하기 위한 '선형적인 현상'을 보여주기에는 충분하지가 않다. 본 연구에서는, 저수지 수온을 모니터링 함으로서, 홍수와 가뭄과 같은 이벤트 및 계절 변화로 인한 수체의 온도분포를 조사 하였다. 그 방법으로, 자체 개발한 써미스터체인을 용담호의 댐축 지점과 댐축으로부터 상류방향으로 6.6km 떨어진 유입지점의 두 곳에 설치하였으며, 연 중 10분 간격으로 수온데이터를 로거에 저장한 후, 두 달에 한번 정도로 센서 정비 및 데이터 수거를 실시하였다. 그 결과, 우리가 눈으로나 현지관측만으로는 파악할 수 없었던 수체내의 많은 특징을 파악 할 수 있었다.. 중랑천 유역의 소배수구역을 대상으로 연중 발생하는 큰 호우사상에 대해 임의의 강우관측소를 결측지점으로 가정하고 주변의 강우관측소로부터 각각의 방법을 이용해 가중치들을 산정하여 결측지점의 강우량 값을 보정하고자 하였다. 또한 각각의 방법을 이용하여 얻어진 결과에 대해 실측값과 보정값의 오차정도를 평균절대오차법(Mean Absolute Error)과 제곱평균제곱근오차법(Root Mean Squared Error)에 의해 산정하여 보정 방법간의 효율성을 검토하고자 하였다.9년, 그리고 2010년${\sim}$2019년까지 총 4구간으로 나누어 결과를 도출하였으며 예상한 바와 같이 후반기 20년 동안에 세 가지 지표가 취약해 지는 것을 확인할 수 있었고, 특히 2000년부터 2009년까지 10년 동안에는 더욱 취약해짐을 확인할 수 있었다.를 보임에 따라 그 정책적 효과는 때로 역기능적인 결과로 초래하였다. 그럼에도 불구하고 이 연구결과를 통하여 최소한 주식시장(株式市場)에서 위탁증거금제도는 그 제도적 의의가 여전히 있다는 사실이 확인되었다. 또한 우리나라 주식시장에서 통상 과열투기 행위가 빈번히 일어나 주식시장을 교란시킴으로써 건전한 투자풍토조성에 저해된다는 저간의 우려가 매우 커왔으나 표본 기간동안에 대하여 실증분석을 한 결과 주식시장 전체적으로 볼 때 주가변동율(株價變動率), 특히 초과주가변동율(超過株價變動率)에 미치는 영향이 그다지 심각한 정도는 아니었으며 오히려 우리나라의 주식시장은 미국시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0

  • PDF

유해 남조류 제어를 위한 생물유래 살조물질 Naphthoquinone 유도체 (NQ 2-0)의 현장 적용 가능성 (A Field Application Feasibility of Biologically Derived Substances (Naphthoquinone Derivate: NQ 2-0) for the Mitigation of Harmful Cyanobacterial Blooms)

  • 주재형;박종성;최혜정;이헌우;한명수
    • Ecology and Resilient Infrastructure
    • /
    • 제4권3호
    • /
    • pp.130-141
    • /
    • 2017
  • 유해 남조류를 친환경적으로 제어하기 위해 개발된 생물유래 물질인 naphthoquinone (NQ) 유도체의 현장 적용 가능성을 확인하고자 하였다. 기흥 저수지 수변에 30 ton 규모의 mesocosm을 설치하여 현장 조건에서의 살조효과와 비생물학적, 생물학적 요인을 모니터링하였다. NQ 2-0 물질을 처리한 결과, 대조구에서는 대상 조류인 Microcystis sp.의 세포밀도가 지속적으로 증가한 반면, 처리구에서는 실험 초기 $7.9{\times}10^4cells\;mL^{-1}$에서 접종 후 점진적으로 세포수가 감소하여 10일차 $9.7{\times}10^2cells\;mL^{-1}$으로 대조구 대비 99.4% 감소하였다. 실험 종료시인 15일차에는 Microcystis sp. 세포수가 100% 제거되었다. 대상 조류인 Microcystis sp. 종만을 선택적으로 제어하였을 뿐만 아니라, 다른 식물플랑크톤의 성장과 식물플랑크톤 종 다양성 지수도 증진되었다. 또한, 식물플랑크톤을 제외하고 NQ 2-0 물질에 의하여 물리 화학적요인 (수온, 용존 산소, pH, 전기전도도, 영양염)과 생물요인 (박테리아, HNFs, 섬모충, 동물플랑크톤)에 영향을 미치지 않았으며, 대조구와 처리구에서 유사한 경향이 관찰되었다.

태양열 집열관 과열방지를 위한 지중열교환기 연구 (A study of geothermal heat dump for solar collectors overheat protection)

  • 황현창;;이계복;이석호
    • 한국산학기술학회논문지
    • /
    • 제17권7호
    • /
    • pp.616-622
    • /
    • 2016
  • 하절기 줄어드는 온수부하는 태양열 집열기 과열의 주된 원인이다. 과열방지목적으로 공냉 또는 차단막이 사용되는데 이는 추가적인 기계적요소를 필요하게 되고 장기 운용 시 파손 등의 우려에 따라 그 신뢰도도 크게 저하된다. 지중열교환기는 지열을 열원으로 방열 또는 흡열을 진행하는데, 지열을 고 열원으로 하여 흡열을 목적으로 하는 연구가 대다수이며 지열원이 저열원으로 이용하는 방열에 대한 연구는 부족한 편이다. 그리하여 본 연구에서는 태양열집열판의 과열방지를 목적으로 하는 지중열교환기의 가능성 및 그 성능에 대한 연구를 진행하였다. 여름철 최대 $150^{\circ}C$이상의 고온을 유지하는 태양열집열판의 열을 방출하기 위하여 1.2m의 하부 깊이를 갖는 50m 나선형 지중열교환기를 설치하였고 이를 통해 순간 냉각이 가능한 것으로 확인되었으며, 태양열집열판의 여름철 과열에 의한 파손을 방지할 수 있었다. 그리고 다양한 변수에 대한 이론적인 계산을 통하여 0.33kg/s의 최저 순환유량만 유지해주면 지열 열교환기의 길이에 따른 방열효과에 큰 영향을 미치지 않음을 판단할 수 있다. 또한 축열조와의 공동 사용시 냉각효과는 여름철 과열시 충분한 과열방지 제어가 가능한 것으로 조사되었다.

Bluegill의 난발생과 자치어 (Development of Eggs, Larvae and Juveniles of Bluegill, Lepomis macrochirus RAFINESQUE)

  • 김용억;박양성
    • 한국수산과학회지
    • /
    • 제20권1호
    • /
    • pp.24-32
    • /
    • 1987
  • 1985년 8월 17일과 24일에 경상남도 양산군 하북면 지내마을에 위치한 저수지에서 낚시에 의해 채포된 bluegill을 실험실내에 설치된 수조에서 사육하여 1968년 7월 13일, 8월 2일의 2차에 걸쳐 자연산란된 것을 재료로 난발생과정과 부화자어를 관찰한 결과를 요약하면 다음과 같다. 수정란은 난경이 $1.18\~1.30mm$로서 무색투명하며, 거의 구형이고, 난막이 점착성이 강한 분리심성 점착난이다. 사육수온 $24.3\~24.5^{\circ}C$(평균 $24.7^{\circ}C$에서 수정후 40시간만에 부화하였다. 부화직후의 자어는 전장이 $3.75\~4.05mm$(평균 3.94mm)로서 난황뒷쪽에 직경 0.4mm의 큰 유구 1개가 존재하며, 색소포는 아직 출현하지 않고 입과 항문도 열려 있지 않다. 근절수는 $10\~11+19=29\~30$개이다. 부화후 3일째의 자어는 전장이 $4.5\~4.9mm$(평균 4.73mm)로서 입이 열리고, 흑색소포가 처음으로 난황상, 막지느러미와의 경계부, 복강등쪽, 소화관 뒤쪽에 출현한다. 부화후 10일째의 자어는 전장이 $6.05\~6.35mm$(평균 6.20mm)로서 난황이 완전히 흡수되고, 곧창자의 연동이 활발하다. 부화후 45일째의 치어는 전장이 25.20mm로서 D.X, 12, A.III, 11, V. I, 5, P.$13\~14$, C.18로 모든 지느러미 줄기수가 정수에 달하며, 체측에 비늘도 형성된다.

  • PDF

긴날개여치 실내 대량 사육을 위한 발육 및 산란특성 분석 (Analysis of the Developmental and Ovipositional Characteristics for Interior Mass-Rearing of Gampsocleis ussuriensis Adelung)

  • 임주락;문형철;박나영;이상식;유영진
    • 한국응용곤충학회지
    • /
    • 제58권4호
    • /
    • pp.381-387
    • /
    • 2019
  • 2017년부터 2019년까지 전북 부안지역에서 채집한 긴날개여치의 발육 및 산란특성을 조사하였다. 긴날개여치(Gampsocleis ussuriensis Adelung)는 저수지 주변 잡초가 우거져 있는 곳에서 주로 발견되었고, 야외에서는 성충이 7월 중순 출현하여 9월 상순까지 나타났다. 알 상태로 겨울을 보내고 이듬해 4월 상순부터 7월 중순까지 약충이 출현하는 것으로 나타났다. 실내에서는 4월 상순 이후 부화한 약충은 5회 탈피를 하고, 성충이 되었다. 긴날개여치 산란기간은 약 58일 정도 소요되었다. 암컷 한 마리당 총평균산란수는 124개였으며, 성충수명은 암컷 95.6일, 수컷 84.8일이었다. 산란매트로는 마사토와 코코피트를 7:3으로 섞은 것이 가장 좋았다. 온도별 발육기간은 24℃에서 64.1일로 가장 길었고, 온도가 높을수록 발육기간이 짧아지고, 생충률은 32℃에서 77.8%로 가장 좋았다. 긴날개여치 약충 사육밀도는 사육밀도가 높을수록 생존율은 떨어지고, 발육속도가 빨라지며, 영기별 탈피속도가 빨라지는 경향이었다.

포항 지역 지하수에 분포하는 탄화수소 가스의 지화학 (Geochemistry of the hydrocarbon gases in the Pohang Area)

  • 이영주;정태진;김진석;김학주;윤혜수;곽영훈
    • 한국석유지질학회지
    • /
    • 제6권1_2
    • /
    • pp.37-43
    • /
    • 1998
  • 포항 지역의 지하수에 녹아있는 수용성 탄화수소 가스의 지화학적 특성을 파악하기 위해서 지하수를 채취하여 지하수의 성분, 추출된 가스의 함량, 탄화수소 가스의 성분 및 탄소 동위원소 분석을 실시하였다. 지하수들로부터 추출된 총 가스의 함량은 최소 27.0 ml/l, 최대 50.1 ml/l이다. 추출된 가스 중 탄화수소 성분은 메탄 $(CH_4)$이 27 ppm에서 376,420 ppm까지 나타났고 에탄 $(C_2H_6)$ 성분도 일부 시료에서 19 ppm에서 127 ppm까지 검출되었다. 지하수로부터 추출된 총 가스의 함량은 대수층 및 주변 지질에 따른 변화는 없었던 반면, 총 탄화수소의 함량은 대수층 및 주변 지질과 관련이 있는 것으로 나타났다. 즉, 대수층이 제3기층이거나 제3기 퇴적층의 두께가 두꺼운 곳에서 시추된 공의 지하수에서 탄화 수소 가스의 함량이 높은 경향을 보인다 지하수에 녹아있는 탄화수소의 함량과 지하수의 총 고형물 (T-solids)성분이 비례하는 것으로 보아 탄화수소 성분은 제3기층의 지층수에 녹아있었던 것으로 생각한다. 지하수에서 추출된 총 탄화수소 가스 중 메탄 성분은 $99.9\%$ 이상을 차지하고, 메탄 가스의 탄소 동위원소 비 $({\delta}C^{13})$$-73.1\%_{\circ}$에서 $-43.22\%_{\circ}$ 까지의 범위를 나타내는 것으로 보아 포항 지역 수용성 가스는 저온, 무산소 환경에서 메탄 생성 박테리아의 작용에 의해서 생성된 생물기원 가스로 해석된다.

  • PDF