• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.38-42
• /
• 2001

A complete quantitative understanding of DT has been difficult because the process represents such a broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. There are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

• Journal of Information Science Theory and Practice
• /
• v.9 no.1
• /
• pp.54-67
• /
• 2021

This paper presents the ISRI (Information Systems Research Indicators) Web tool, publicly and freely available at isri.sciencesphere.org. Targeting Information Systems (IS) researchers, it compiles and organizes IS adoption and use theories/models, constructs, and indicators (measuring variables) available in the scientific literature. Aiming to support the IS theory development process, the purpose of ISRI is to gather and systematize information on research indicators to help researchers and practitioners' work. The tool currently covers eleven theories/models: DeLone and McLean's IS Success Model (D&M ISS); Diffusion of Innovations Theory (DOI); Motivational Model (MM); Social Cognitive Theory (SCT); Task-Technology Fit (TTF); Technology Acceptance Model (TAM); Technology-Organization-Environment Framework (TOE); Theory of Planned Behavior (TPB); Decomposed Theory of Planned Behavior (DTPB); Theory of Reasoned Action (TRA); and Unified Theory of Acceptance and Use of Technology (UTAUT). It also includes currently over 400 constructs, nearly 2,500 indicators, and about 60 application contexts related to the models. For the creation of the tool's database, nearly 580 references were used.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.415-424
• /
• 2024

This study analyzes trends and characteristics of the machine tool remanufacturing industry and proposes a standard process that considers environmental impact assessment during the remanufacturing process. First, trends in remanufacturing and environmental regulations are reviewed. And the current status of the machine tool remanufacturing industry and cases of national R&D projects related to machine tools are analyzed. Machine tool remanufacturing has a high resource saving effect, and remanufacturing is carried out as a finished product rather than as a part. And the scope of remanufacturing work is very wide due to the performance improvement of the machine and the addition of features. In order for the machine tool remanufacturing industry to be competitive, it is necessary to create products with high added value. In addition, in order to respond to international environmental regulations, it is necessary to secure related data by conducting an environmental impact assessment together during remanufacturing.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.635-638
• /
• 2005

Spatial audio coding (SAC) is an extremely high compact representation of encoded multi-channel audio material. This paper suggests a multi-channel audio service in the terrestrial digital multimedia broadcasting (T-DMB) system using a novel SAC tool, which is called a virtual source location information (VSLI)-based SAC tool. Intensive experiments are presented to evaluate the validity of the proposed VSLI-based SAC tool, and prototypical systems are also presented to demonstrate the reliability of the proposed multi-channel T-DMB system in real applications.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.163-165
• /
• 2008

A S/W testing for vital railway signaling system have been important because of the increase of software usage for signaling. And also the safety of vital signaling system is required by int'l std. such as IEC 61508. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to assessment software's safety. In this paper, we propose a automation schemen of software testing tool for railway signaling system. From that, we show the functional architecture and internal components of the tool.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.105-109
• /
• 1997

The effects of surface conditions of the C-2 cemented carbide substrate on the adhesion of diamond film were investigated. The substrates were pretreated for different times with Murakami's reagent and then the acid solution of an H2SO4-H2O2. The adhesion strength was estimated by a peeling area around the Rockwell-A indentation. The cutting performance of the diamond-coated tools was evaluated by measuring flank wears in dry turning of Al-17% Si alloy. The morphology of deposited diamond crystallites was dominated by (111) and (220) surfaces with a cubooctahedral shape. The diamond film quality was hardly affected by the surface conditions of the substrate. The variation of tool life with longer substrate etching times resulted from a compromies between the increase of film adhesion at the interface and the decrease of toughness at the substrate surface. The coated tools were mainly deteriorated by chipping and flaking of the diamond film form a lock of adhesion strength, differently from the wear phenomena of PCD tools.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.104-112
• /
• 2001

Simply, Nonlinear dynamics theory means the complicated and noise-like phenomena originated form nonlinearity involved in deterministic dynamical system. An almost all the natural signals have nonlinear property. However, there exist few analysis software tool or package for a research and development of applications. We develop nonlinear time series analysis simulator is to provide a common and useful tool for this purpose and to promote research and development of nonlinear dynamics theory. This simulator is consists of the following four modules such as generation module, preprocessing module, analysis module and ICA module. In this paper, we applied to Electroencephalograph (EEG), as it turned out, our simulator is able to analyze nonlinear time series. Besides, we could get the useful results using the various parameters. These results are used to diagnostic the brain diseases.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.8-12
• /
• 2005

The positioning system for an ultra precision machine tool must be accurate to the order of a nanometer. Various feed drive devices have been proposed to achieve this resolution; currently, most attention is directed towards hydrostatic lead screws and friction drives. It has been reported that a positioning resolution accurate to an angstrom can be achieved using a twist-roller friction drive. Therefore, we manufactured an ultra precision positioning system driven by a twist-roller friction drive and assessed its performance when defining problems and finding solutions. Our study showed that the twist-roller friction drive is mechanically suitable for ultra precision positioning, but some considerations are required to obtain a higher resolution.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.64-70
• /
• 2002

The positioning system fur the ultraprecision machine tool should have nanometer order of positioning resolution. For the purpose of achieving that resolution, various feed drive devices have been proposed and currently hydrostatic lead screw and friction drive are paid attention. It is reported that an angstrom resolution can be achieved by using twist-roller friction drive. So we have manufactured ultraprecision feeding system driven by the twist-roller friction drive and perform performance assessment for problem definition and solution finding. As a result, we found that the twist-roller friction drive is mechanically suitable for ultraprecision positioning but some considerations are needed to get higher resolution.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.53-61
• /
• 2000

The manufacture of a marine propeller typically requires long lead time to generate 5-axis tool path. Hence it may take several weeks to manufacture a satisfactory propeller with a general purpose CAD/CAM system. In this research a dedicated 5-axis CAD/CAM system for machining marine propellers has been developed, The system employs various methods to enhance the productivity : interference-free tool path generation employing check vectors and optimum cutter size determinants. In addition an iterative NURBS modeling technique is used to improve the accuracy of the modeled surface and effective cutting conditions are determined and recommended empirically to increase the productivity. The proposed CAD/CAM system has been implemented with C++ and OpenGL graphic library on the Windows system. The system validation and sample results are also given and discussed.