• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.269-269
• /
• 2001

Maintainability refers to the ease with which maintenance work can be done. It involves the process of ensuring that products can be easily and safely maintained and that the maintenance support requirement is minimized. When a product has a reasonably long life, the cost of operation and support during that life can greatly exceed the initial capital cost. The value to the customer of optimizing maintainability should be evident. Some effort and expense applied to achieving a product which can be easily and cheaply maintained will make very significant savings in the life cycle costs. In this paper, the International Standard IEC 60300-3-10, which is the application guide for maintainability, is considered. This standard can be used to implement a maintainability program covering the initiation, development and in-service phases of a product. It provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. The elements of a maintainability program, which are maintenance policy and concept, maintainability studies, project management, design for maintainability, analysis and prediction methods, maintenance verification and validation, analysis of life cycle cost, maintenance support planning, and collection and analysis of maintenance data, are fully discussed in this paper.

• 항공우주기술
• /
• 제6권1호
• /
• pp.103-108
• /
• 2007

Eurostar 3000 자세제어 시스템은 자세 안정도에 대한 강력한 요구사항 없이 통신 임무에 최적화 되어 있음으로 통신해양기상위성 광학 관찰 임무에서 정밀 자세 안정도 요구사항을 만족하기 위해서는 개선되어야 한다. 이 통신해양기상위성 구성의 제한 사항은 휠에 대해 특수성을 유발시킨다. 본 해석의 목적은 통신해양기상위성 휠과 외부 유닛들 사이의 전기접속에 대해 적합성을 검증하는 것이다. 본 연구에서는 전력링크, 명령, 디지털 측정, 아날로그 측정 및 실패 상태 또는 조립시험 오류들에 대해 유닛들 사이의 적합성을 확인하였다. 본 접속 적합성 검증에 추가적으로 본 연구는 하니스 레벨에서 적용되는 전기 및 제작에서 권고사항을 제공한다.

• 에너지공학
• /
• 제12권3호
• /
• pp.177-183
• /
• 2003

본 논문은 방사능조사의 조건하에서의 설계조건을 만족해야 하는 fuel rod의 설계응력값을 검증하는데 그 목적이 있다. 이 경우에, 안전성에 있어서 열에 의한 영향이 가장 주된 고려조건이 된다. 그러나 이러한 열영향이 고려된 해석은 구조물의 안전성해석에서 비교적 간단히 해결되는 문제가 아니다. 여기서는 이론적 해석을 통한 접근방식으로 보수적인 관점에서 fuel rod의 설계에 적용되는 설계 응력값을 검증하고자 하였다. 추후에 시도하는 fuel rod의 설계에 있어서 본 해석방법을 이용하면 안전설계의 검증을 위한 이론적 접근방법의 하나로 이용할 수 있을 것으로 사료된다.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.171-179
• /
• 2004

가동중검사와 보수는 원자력발전소의 원자로계통설계에서 매우 중요한 설계개념이다. 액체금속로 KALIMER의 가동성 검증을 위해서 기계계통 설계에 가동중검사와 보수개념이 반영되어야 한다. 본 연구에서는 KALIMER 의 안전성과 신뢰성을 확보하기 위하여 KALIMER의 개념설계 단계에 필요한 가동중검사와 보수의 기본개념을 설정하였다. 액체금속로 가동중검사 규정인 ASME Section XI Division 3를 반영하고 KALIMER의 설계특성을 고려하여 원자로계통과 주요부품의 가동중검사와 보수에 대한 방법과 요건을 설계하고 기술하였다.

• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.24-32
• /
• 2015

Pulse tube-type spaceborne cryocooler is widely used to cool down the infrared sensor of observation satellites. However, such cryocooler also generates micro-vibration which is the one of main sources to seriously affect the image quality during its on-orbit operation. Therefore, to comply with the mission requirement of high resolution observation satellite, additional technical efforts have been required. In this study, we proposed a spaceborne cryocooler passive vibration isolator using SMA mesh washer, which guarantees the structural safety of both the micro-vibration disturbance source and itself under harsh launch vibration loads without an additional holding mechanism and the micro-vibration isolation performance on orbit environment. To verify the micro-vibration isolation performance of the proposed vibration isolator, we performed the micro-vibration isolation measurement test using the dedicated micro-vibration measurement device proposed in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.956-959
• /
• 2005

The overall goal of this thesis is to develop a new algorithm based on the octree model for geometric and mechanistic milling operation at the same time. Most commercial machining simulators are based on the Z map model, which has several limitations in terms of achieving a high level of precision in five-axis machining simulation. Octree representation being a three-dimensional (3D) decomposition method, an octree-based algorithm is expected to be able to overcome such limitations. With the octree model, storage requirement is reduced. Moreover, recursive subdivision is processed in the boundaries, which reduces useless computations. To achieve a high level of accuracy, fast computation time and less memory consumption, the advanced octree model is suggested. By adopting the supersampling technique of computer graphics, the accuracy can be significantly improved at approximately equal computation time. The proposed algorithm can verify the NC machining process and estimate the material removal volume at the same time.

• 산업공학
• /
• 제23권3호
• /
• pp.221-228
• /
• 2010

With the development of science and technology, modern submarines are equipped with high technology devices and multi-functioned precise armaments, consequently, acquisition cost as well as maintenance cost of the submarines are getting higher and higher. However, tight defense budget forces navy to significantly reduce military operating and maintenance costs. In this study, the maintenance and operating costs of submarine Jangbogo-II are estimated through M&S (Modeling and simulation) methodologies in order to reasonably and consistently work out the requirement verification system of Jangbogo-II. The maintenance and operating costs of Jangbogo-II along the next 25 years are estimated as 312.65 billion won via engineering analysis methods while 312.69 billion won from PRICE Model, which shows only 0.04 billion won differences as a whole. This study is expected to be able to provide meaningful decision making data for not only short and/or mid term operating planning but military budgeting.

• Composites Research
• /
• 제14권5호
• /
• pp.20-25
• /
• 2001

본 논문 MSC/NASTRAN을 사용하여 Ka 와 Ku 대역 위성 탑재형 안테나 구조물의 자유진동현상 및 정현파 강제 진동 응답에 대한 유한요소해석을 수행하였다 안테나 구조물과 위성 버스체간의 동적 연성을 피하고, 기본 강성 조건을 입증하기 위해 최소 고유진동수 조건을 만족하도록 설계하였다. 정현파 강제 진동의 경우, Large mass 방법을 사용하여 기저 진동형태로 해석하였고, X-, Y-, Z- 축에 대해 독립적으로 입력 가속도에 대한 응답 가속도들을 관찰하였다. 유한요소해석을 통해 얻어진 결과들은 실제 위성 안테나 검증 실험에 있어서 검증 및 비교 자료로 사용될 수 있고, 시험 계획 수립에도 응용될 수 있다

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.141-145
• /
• 2010

Most of the industrial loads includes the non-linear load as well as the linear load because there are many kinds of power conversion equipments at the input stage of the load in distribution network. The non-linear load causes the distortion of voltage waveform at PCC because the non-linear load generates the harmonic current. As a result, various voltage harmonics are existed at PCC depending on the current harmonics from the non-linear load. And, a series reactor is generally connected to the power capacitor in series to attenuate the distortion of voltage waveform and to reduce an inrush current of power capacitor. Also, harmonic current of power capacitor is highly dependent on the series reactor because it is operated with the power capacitor as a passive filter against nonlinear loads. Then, these capacitors might be damaged by the excessive voltage and current harmonic components. In this paper, we presented how to select the capacitor and series reactor to meet the requirement of the voltage distortion at PCC and analyzed the voltage, current and capacity rating of the power capacitor by the computer simulation to ensure the safe operation of power capacitor when the voltage harmonics at PCC are existed. Also, the analysis data were compared with the experimental measurements for the verification.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1764-1776
• /
• 2017

To achieve economic stability, distribution Company as an economic institution should be managed by various processes. In this way, knowledge of different processes is the first step. Furthermore, expectations, outputs, requirement data, and sub-processes should be extracted and determined. Accordingly, to assign the performance responsibility of each process, the decision-making points must be introduced and, the deviation or change in set-points should be investigated into processes. Also, the performance of processes could be monitored by introducing of the sub-indictors. In this study, a practical method is presented for monitoring of reliability and power loss indices from viewpoint components' supply chain into the distribution network. At first, the visibility model of the supply chain is illustrated by focus group and the sub-indicators are extracted for each process of this chain. Then, validation and verification of the sub-indicators are accomplished by the Delphi method and, an information dashboard is presented by confirmed the sub-indicators and statistics methods. Finally, the proposed method is investigated by real data in a typical network and the results are analyzed.