• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.469-473
• /
• 2001

It is very important that piping system shall meet the optimum design requirement as predicted in designing system. If the piping system proved not to meet the requirement in commission it shall be redesigned and corrected till the required capacity is satisfied. which costs much expense. The objective of this study is to understand steady 3-dimensional flow phenomena in a process piping system numerically. 3-dimensional numerical simulations with standard $k-{\epsilon}$ model were carried out by using ALGOR code for three cases of Reynolds number. 2500, 3500 and 4500, based on inlet pipe diameter and three cases of inflow air temperature, $20^{\circ}C,\;50^{\circ}C$ and $100^{\circ}C$.

• Journal of Information Technology Applications and Management
• /
• v.11 no.2
• /
• pp.15-27
• /
• 2004

Most software projects inevitably involve various types and degrees of uncertainty. Without proper risk assessment and coordination, software projects can easily run out of control and consume significant additional resource. Thus, risk management techniques are critical issues to information system researchers. Previous empirical studies of U.S. software firms support the adoption of development standardization and user requirement analysis techniques in risk-based software project management. Using data collected from software projects developed in Korea during 1999-2000, we conduct a comparative study to determine how risk management strategies impact software product and process performance in countries with dissimilar IT capabilities. In addition, we offer an alternative conceptualization of residual performance risk. We show that the use of residual performance risk as an intervening variable is inappropriate in IT developing countries like Korea where the role of late stage risk control remedies are critical. A revised model is proposed that generates more reliable empirical implications for Korean software projects.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.71-79
• /
• 2014

This paper discusses a method for the determination of frequency control reserve requirement with consideration of the interaction between ex-ante planning and real-time balancing. In proposed method, we consider the fact that the delivered energy for tertiary control reserve is determined based on required capacity for secondary control reserve and the expected amount of load errors. Uncertain load errors are derived by Brownian motion, an optimization method is suggested using a stochastic programming. In a short, we propose an interactive dependent method for determining secondary control reserve requirement based on the principle that it satisfies to minimize the total cost. As a result, this paper provides will analyze for an example model to demonstrate the capabilities of the method.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.97-109
• /
• 2005

In this paper, the critical requirement for obstacle awareness and avoidance is assessed with the compliance of the equivalent level of safety regulation, and then the collision avoidance sensor system is presented with the key design parameters for the requirement of the smart unmanned aerial vehicle in low-altitude flight. Based on the assessment of various sensors, small-sized radar sensor is selected for the suitable candidate due to the real-time range and range-rate acquisition capability of the stationary and moving aircraft even under all-weather environments. Through the performance analysis for the system requirement, the conceptual design result of radar sensor model is proposed with the range detection probability and collision avoidance mode is established based on the time-to-collision, which is analyzed by collision scenario.

• Journal of Ship and Ocean Technology
• /
• v.12 no.1
• /
• pp.45-56
• /
• 2008

Recently, International Association Classification Societies (IACS) has adopted the Common Structural Rules (CSR) for Bulk Carriers and Tankers, which specifies the requirement associated with the ultimate strength of hull girder structure. The theoretical background and the results of verification study are neither well summarized nor released. Furthermore, the requirement is not a form of deterministic formula but a form of program in which source code is not disclosed. The reliability of the non-linear structural analysis program is verified through the comparison with the results of the analysis and the model test. Then, the reliability of the ultimate strength requirement in CSR is checked by comparing with the results of rigorous non-linear analysis.

• Journal of the Korean Home Economics Association
• /
• v.17 no.2
• /
• pp.10-29
• /
• 1979

Nowadays various organizations, such as hospitals, workers, students and families are requesting a model sample of standardized Korean meal plan to meet their nutritional requirement with daily food intake. Practical application of nutritional requirement in Korean meal is not yet established. This mainly comes form the lack of the research works on experimental cookery for the right amount of recipes of Korean meal , and no effect was ever paid for this angle by many specialist. Therefore, it is urgent to research and construct the standardized meal plan for Korean people. Contents of the present research are as follows ; 1) Standardization of recipes and the amounts : Various kinds of daily foods were selected for the purpose of recipes. The standardization of the recipes and the right amount were continuously attempted. 2) Research on the construction of nutritional meal plan : The method of constructing harmonious meal plan based upon the requirement, were studied. And the meal plans were constructed according to the different units of ages. Special meal plans were also constructed for the pregnant women and lactating women. 3) Evaluation for the nutritional adequacy were followed after the setting the various recipes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.381-387
• /
• 1999

Two experiments were conducted to subdivide threonine (exp. 1) and glycine (exp. 2) requirements of broilers into maintenance and growth requirements. Purified diets containing five graded levels of threonine (exp. 1) and glycine (exp. 2) were fed to growing chicks to estimate threonine (exp. 1) and glycine (exp. 2) requirements for growth and maintenance. A model developed to divide threonine requirement for maintenance from that for growth yielded a requirement for growth of 8.946 mg/g weight gain and 0.341 mg/mg N gain; the maintenance requirement was 0.033 or 0.030 mg per unit of metabolic body size $(Wg^{0.75})$. The plateau of plasma threonine concentration occurred at 279.4 mg threonine intake/day. The total threonine requirement was 289.1 mg/day or 0.69% of the diet, 294.1 mg/day or 0.71% of the diet based on weight gain and nitrogen gain responses, respectively. These estimates were in close agreement with previous estimates of threonine requirements. From the relationship of weight gain to N gain, 5.46% of the retained protein consisted of threonine; the reported threonine content of chick muscle was 4.02%. The glycine requirement for maintenance could not be determined due to failure to obtain data allowing extrapolation to zero response. However, ADG increased slightly up to 0.56% glycine.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.3
• /
• pp.421-436
• /
• 2019

Objectives: The purpose of this study was to compare the dental treatment needs of workers depending on their shifts and working patterns. Methods: Only workers aged 15 or older according to the $6^{th}$ Korea National Health and Nutrition Examination Survey (2013-2015) were considered eligible. A total of 9,092 people who responded to health surveys and completed oral examinations and interviews were selected for the study. Statistical analysis was carried out by the complex samples general linear model. Results: As the daytime workers' age increased, the requirement for restorative treatment decreased. In contrast, the requirement for tooth extraction caused by dental caries and periodontal disease increased. As the evening shift workers' age increased, the requirement for restorative treatment decreased. In the case of shift workers, the requirement for restorative treatment was lowest in those aged 50-64 years and highest in those aged 30-49 years. In the case of smokers; the daytime workers required a higher amount of restorative treatment, pulpal treatment, and tooth extraction due to dental caries and periodontal disease; the night shift workers required a higher amount of restorative treatment; and the shift workers required a higher amount of tooth extraction caused by periodontal disease. The results of comparing the dental treatment needs depending on working patterns were: the need for restorative treatment was higher in night shift workers (0.377) than in shift workers (0.245); the requirement for pulpal and restorative treatment was higher in daytime workers (0.055) than in night shift workers (0.010); requirement for tooth extraction due to periodontal disease was higher in night shift workers (0.060) than in evening shift workers (0.012). Conclusions: There are differences in dental treatment needs depending on the workers' working patterns. Collective oral health care is needed at workplaces to promote the workers' oral health.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.734-745
• /
• 2017

The navigation system of lunar lander are composed of various navigation sensors which have a complementary characteristics such as inertial measurement unit, star tracker, altimeter, velocimeter, and camera for terrain relative navigation to achieve the precision and autonomous navigation capability. The required performance of sensors has to be determined according to the landing scenario and mission requirement. In this paper, the specifications of navigation sensors are investigated through covariance analysis. The reference error model with 77 state vector and measurement model are derived for covariance analysis. The mission requirement is categorized as precision exploration with 90m($3{\sigma}$ ) landing accuracy and area exploration with 6km($3{\sigma}$ ), and the landing scenario is divided into PDI(Powered descent initiation) and DOI(Deorbit initiation) scenario according to the beginning of autonomous navigation. The required specifications of the navigation sensors are derived by analyzing the performance according to the sensor combination and landing scenario.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.77-87
• /
• 2014

The impacts of climate change on upland crops is great significance for water resource planning, estimating crop water demand and irrigation scheduling. The objective of this study is to predict upland crop evapotranspiration, effective rainfall and net irrigation requirement for upland under climate change, and changes in the temporal trends in South Korea. The changes in consumptive use and net irrigation requirement in the six upland crops, such as Soybeans, Maize, Potatoes, Red Peppers, Chinese Cabbage (spring and fall) were determined based on the soil moisture model using historical meteorological data and climate change data from the representative concentration pathway (RCP) scenarios. The results of this study showed that the average annual upland crop evapotranspiration and net irrigation requirement during the growing period for upland crops would increase persistently in the future, and were projected to increase more in RCP 8.5 than those in RCP 4.5 scenario, while effective rainfall decreased. This study is significant, as it provides baseline information on future plan of water resources management for upland crops related to climate variability and change.