• 대한예방한의학회지
• /
• 제3권1호
• /
• pp.173-179
• /
• 1999

압력을 증가시켜가며 맥파를 측정하여 맥파의 진동수와 푸리에 진폭이 가해준 압력에 따라 어떠한 양상을 보이는지 조사하였다. 맥파의 기본 진동수는 압력에 따른 변화를 거의 보이지 않았으며, 푸리에 진폭은 개인의 체질에 따라 몇 가지 유형으로 분류될 수 있음을 보였다. 이 유형들을 다시 푸리에 진폭이 최고점에 이를 때의 압력의 크기와 최고점에서의 상태를 유지할 수 있는 압력의 범위에 따라 맥상의 여러 형태와 연관지을 수 있음을 보였다.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.563-573
• /
• 2014

In hydroforming, the general technique employed to overcome the problem of die corner filling consist in increasing the maximum fluid pressure during the forming process. This technique, in other hand, leads to other difficulties such as thinning and rupturing of the final work piece. In this paper, a new technique has been suggested in order to produce a part with complete filled corners. In this approach, two moveable bushes have been used. So, the workpiece moves driven by both bushes simultaneously. In the first stage, system pressure increases until a maximum of 15 MPa, providing aninitial tube bulge. The results showed that the pressure in this stage have to be limited to 17 MPa to avoid fracture. In a second stage, bushes are moved keeping the constant initial pressure. The punches act simultaneously at the die extremities. Results show that the friction between part and die decreases during the forming process significantly. Also, by using this technique it is possible to produce a part with reasonable uniform thickness distribution. Other outcomes of applying this method are the lower pressures required to manufacture a workpiece with complete filled corners with no wrinkling.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.618-623
• /
• 2011

가스발생기의 압력 제어기법을 제안하였다. 모델기반 제어법칙을 설계하기 위하여 Robert 식과 보존방정식을 이용하여 가스발생기의 모델을 구성하였고, 연소시험을 통하여 모델의 정확성을 검증하였다. 모델은 연소 공간이 증가함에 따라 시스템의 고유 특성이 변화하게 되는데, 이러한 특성으로 인한 폐루프 구조에서 나타나는 응답특성을 평가하기 위하여 PID 및 비선형 적응 제어법칙을 설계하였다. 수치 시뮬레이션 결과 두 방법이 각각 제어 성능과 실제 시스템 적용에 문제가 있음을 알 수 있었고, 이를 극복하기 위한 새로운 제어기법을 제안하였다. 새롭게 제안된 이득계획 제어기법의 수치 시뮬레이션 결과 외란 및 측정 잡음의 영향에서도 우수한 제어 응답성능을 보였다.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.105-119
• /
• 2004

To enhance our understanding of the loads on the foot during treadmill running, we have used a pressure-sensitive insole system to determine pressure, rate of loading and impulse distributions on the plantar surface during treadmill running, both in minimally cushioned footwear and in cushioned shoes. This report includes pressure, rate of loading, impulse and contact time data from a study of ten subjects running on a treadmill at 4.0m/s. Among heel-toe runners, the highest peak pressures and highest rates of loading were observed under the centre of the heel and in the medial forefoot. The arch regions were only lightly loaded. Contact time was greater in the forefoot than in the heel. Two-thirds of the impulse recorded during the step was the result of forces applied through the forefoot, mostly in the region of the metatarsal heads. The distribution of loads in the shoe suggests that the load distributing properties of the cushioning system are most important in the centre of the heel, under the metatarsal heads and great toe. Shock attenuation is primarily required under the centre of the heel and to lesser extent under the metatarsal heads. Some energy dissipation may be desirable in the heel region because it causes shock to be absorbed with less force. All the 'propulsive' effort is applied through the forefoot. Therefore, this region should as resilient as possible.

• Wind and Structures
• /
• 제23권4호
• /
• pp.301-311
• /
• 2016

The numerous benefits of Savonius turbine such as simple in structure, has appropriate self-start ability, relatively low operating velocity, water acceptance from any direction and low environmental impact have generated interests among researchers. However, it suffers from a lower efficiency compared to other types of water turbine. To improve its performance, parameters such flow pattern, pressure and velocity in different conditions must be analyzed. For this purpose, a detailed description on the flow field of various types of Savonius rotors is required. This article presents a numerical study on a nonlinear two-dimensional flow over a classic Savonius type rotor and a Benesh type rotor. In this experiment, sliding mesh was used for solving the motion of the bucket. The unsteady Reynolds averaged Navier-Stokes equations were solved for velocity and pressure coupling by using the SIMPLE (Semi-Implicit Method for Pressure linked Equations) algorithm. Other than that, the turbulence model using $k-{\varepsilon}$ standard obtained good results. This simulation demonstrated the method of the flow field characteristics, the behavior of velocity vectors and pressure distribution contours in and around the areas of the bucket.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.299-306
• /
• 1996

We invesgated the fesibility of thin films deposition by pyrolysis of metalorganic precursors using chemical beam deposition (CBD) process. We attempted to understand the effects of deposition variables such as substrate temperature operating pressure effusion cell temperature and H2 partial pressure on the properties of MgF2 grown by CBD. Mg(tfac)2 was used as a precursor. MgF2 thin films were always grown in an amorphous state and crystallized bypost-annealing. he higher the substrate temperature and the lower the operating pressure the less the impurities I the deposited MgF2 thin films. H2 gas has to be supplied for the pyrolitic reaction of Mg(tfac)2 decomposition. MgF2 films annealed in H2 have lower C impurity than those annealed in O2. But their crysatllinity was independent of annealing atmosphere. The optimum conditions for the prepara-tion of MgF2 films by CBD process were as following : The substrate temperature 55$0^{\circ}C$ the operating pressure 10-4 torr; effusion cell temperature 21$0^{\circ}C$ the percentage of H2 100% Post-annealing in H2 gas was required to remove residual carbon and to form MgF2 crystalline phase.

• 한국주조공학회지
• /
• 제26권5호
• /
• pp.217-221
• /
• 2006

The main emphasis of this study was to utilize thixoextrusion process for improving extrudability of 7075, 7003 Al wrought alloys and AZ31 Mg wrought alloy. The results of thixbextrusion experiments about microstructures and extrusion pressures were compared with conventional hot extrusion results. The maximum extrusion pressure of thixoextrusion was greatly decreased compared with that of conventional hot extrusion. It was pointed out that the extrusion temperature dependence of the maximum extrusion pressure was large and the influence of extrusion temperature on the improvement of extrudability was remarkable in thixoextrusion. This will contribute to extrudability in terms of extrusion pressure, which in turn means that shorter process time is required and smaller extrusion machine can be applied for the same operation. The elongated grains to extrusion direction were generally observed during conventional hot extrusion, while the thixoextruded microstructures were isotropic.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1305-1313
• /
• 2000

In a co-rotating scroll compressor, both scrolls rotate on their fixed axes contrary to the conventional orbiting type scroll machine. This implies fixed locations and directions of the gas pressure force and sealing force. Because the tilting moment is mainly caused by interplay between the resultant force of above forces and bearing reaction force, the variation during one cycle is relatively small. Under real operation, this moment is balanced by the restoring moment created by the reaction between the baseplate and thrust bearing or between the scroll tip and baseplate. If these reactions become too large, greater torque is required due to increased friction in addition to the wear of mating parts. Consequently, appropriate study and minimization of tilting moment is important in the design of scroll machines. In this study, taking into account of the small variation of tilting moment during one cycle, we minimize the moment and thrust bearing reaction force by a properly designed back pressure chamber. As a result, for both the driving and driven scrolls, the tilting moment and the reaction force of thrust bearing can be minimized. And the stability is improved for all cases.

• 성인간호학회지
• /
• 제25권3호
• /
• pp.241-249
• /
• 2013

Purpose: The aim of the study was to identify the effects of education from using cellular phones and a short messaging service. Methods: Collected data included baseline demographics, blood pressure, abdominal circumference, total cholesterol, body mass index and health behavior index (Dietary Practice Guidelines Score, Physical Activity, Drinking frequency, Stress score, Subjective health status, and Action change stage score). Data were collected at public health centers in Chungcheongnam-do from January to December, 2011. Data obtained from Individual health counseling Programs in Chungcheongnam-do. Analysis was divided into health risk group and Disease management group, using a paired t test. Results: Following the education of using short messaging service of cellular phones Health risk group was a reduction in the systolic blood pressure, diastolic blood pressure, waist circumference. Disease management group was a reduction in the systolic blood pressure and body mass index. In both groups, there were improvement in the Health behavior index; dietary practice guidelines score, physical activity, stress score, subjective health status and action change stage scores. Conclusion: These results indicated that education using short messaging service of cellular phone for Community was effective in improving health behaviors and status. By applying the results, development of customized teaching messages for stable settlement is required.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.405-409
• /
• 2008

This technical paper is proposing a sound concept in the application of the rehabilitation method of the water supply steel pipe in the large diameter ranged from 1,800mm to 3,500mm. There were conducted the experimental tests for the specimens as well as the real steel pipe of diameter 2,200mm. The water pressure ejected from nozzle tip should be at least 2,500bar to have the satisfied surface profiles required in the design criterion. The most difficult thing is to keep the water pressure at the nozzle tip as 2,500bar during the consecutive work in the interval of the work site more than 1km. It is found that the method suggested in this study is adequate method to meet the specified design criteria. The results of this study provide the useful information how to setup the equipments for the successful work. This method also provides not only the omission of the blasting process but also the effect of the budget reduction.